Panasonic Color Laser Multi-Function Printer Dp Mc210 Operating Instructions

1. Introduction and Installation
11
For assistance, please contact an authorized Panasonic dealer.
Installa tion
1.6 Toner cartridge and drum 
cartridge
The supplied toner cartridge is a starter toner cartridge.
Caution:
LRead the following instructions before you begin 
installation. After you have read them, open the 
drum cartridge protection bag. The drum 
cartridge contains a photosensitive drum. 
Exposing it to light may damage the drum. Once 
you have opened the protection bag:
– Do not expose the...

1. Introduction and Installation
12
For assistance, please contact an authorized Panasonic dealer.
4Remove the orange protector (5) by pulling it 
toward you, then pull it completely out from the unit.
5Remove the color drum cartridge from the protection 
bag.
LRemove the shipping tape.
LDo not remove the monochrome drum cartridge 
from the protection bag before installing the color 
drum cartridge in step 8.
LWhen holding the color drum cartridge, be sure 
to handle it over a table to prevent damage...

1. Introduction and Installation
13
For assistance, please contact an authorized Panasonic dealer. LDo not touch or scratch the accumulator unit 
(n).
9Remove the monochrome drum cartridge from the 
protection bag.
LRemove the shipping tape.
10Detach the protective cap (o), then detach the 
upper seal cover by holding the tab (p).
11Firmly grip the monochrome drum cartridge (q) and 
remove the protective tray (r) by sliding it toward 
you.
LDo not touch or scratch the green drum surface 
(s) at the...

1. Introduction and Installation
14
For assistance, please contact an authorized Panasonic dealer.
13Before opening the protection bag of the new toner 
cartridges, shake them vertically more than 10 
times.
14Remove the 4 toner cartridges from the protection 
bags.
LRemove the shipping tape.
15Remove each protective tray (w) by lifting up the 
toner cartridge (x).
16Insert each toner cartridge (y) in the appropriate 
color slot.
From left to right, yellow, magenta, cyan, black.
LMake sure that the...

1. Introduction and Installation
15
For assistance, please contact an authorized Panasonic dealer. –“Change Supplies Black  :Low”
–“Change Supplies Cyan   :Low”
–“Change Supplies Magenta:Low”
–“Change Supplies Yellow :Low”
–“Change Supplies Toner Empty”
–“Change Supplies Black  :Empty”
–“Change Supplies Cyan   :Empty”
–“Change Supplies Magenta:Empty”
–“Change Supplies Yellow :Empty”
When the display shows the following, replace the drum 
cartridge.
–“Color Drum Life Low”
–“Monochrome Drum Life Low”...

1. Introduction and Installation
16
For assistance, please contact an authorized Panasonic dealer.
3Load the paper, print-side up (2).
Important:
LPush and lock the plate (3) in the standard 
input tray, if it has come up.
4Pinch the right side of the recording paper guide 
(4), then slide it to match the paper size mark.
Pinch the front and back recording paper guides (5) 
at the same time, then slide them together to match 
the paper size mark.LMake sure that the recording paper guides (6) 
are at the...

1. Introduction and Installation
17
For assistance, please contact an authorized Panasonic dealer.
Caution for the standard input tray
LDo not drop the standard input tray.
LHold the standard input tray with both hands 
when removing or installing. The standard input 
tray weighs approximately 2.9 kg (6.4 lb) when 
the recording paper is fully loaded.
Do not touch the plate (1) on the left side of the 
standard input tray.
Approx. 2.9 kg (6.4 lb)
1 

2. Preparation
18
For assistance, please contact an authorized Panasonic dealer.
2 Preparatio n 2For a ssistanc e, plea se con ta ct an  a uth oriz ed Pan ason ic  d ealer.
Con nections  an d  Setup
2.1 Connections
Caution:
LWhen you operate this product, the power outlet 
should be near the product and easily 
accessible.
Note:
LIf any other device is connected to the same 
telephone line, this unit may disturb the network 
condition of the device.
Using surge protectors
LThe warranty does not cover...

2. Preparation
19
For assistance, please contact an authorized Panasonic dealer.
2.2 Turning the power switch ON
Turn the power switch to the ON position (1).
2.3 Dialing mode
If you cannot dial (page 45), change this setting 
according to your telephone line service.
1{Menu}
2Press {#}{1}{2}{0} to display “Dialing Mode”.
3Press {1} or {2} to select the desired setting.
{1} “Pulse”: For rotary/pulse dial service.
{2} “Tone” (default): For tone dial service.
4{Set}
5Press {Menu} to exit.
1
{Set}
{Menu} 

2. Preparation
20
For assistance, please contact an authorized Panasonic dealer.
2.4 Selecting the operation mode 
(Scan/Copy/Fax/Print)
You can select the desired mode by pressing one of the 
following buttons.
–{Scan}: Select this mode when using the unit as a 
scanner (page 35).
–{Copy}: Select this mode when using the unit as a 
copier (page 40).
–{Fax}: Select this mode when using the unit as a fax 
machine (page 45).
–{Print}: Select this mode when using the unit as a 
printer (page 31).
Note:
LThe...