Panasonic Color Cctv Camera Wv Cw864 Operating Instructions

32
● Alarm Input/Output (ALARM IN/OUT)
Move the cursor to ALARM IN/OUT, and press the CAM (SET) key.
The ALARM IN/OUT submenu appears.
Note:While the camera is in the AF mode or the lens moves between
WIDE and TELE, alarm input may be ignored if several alarm
inputs are received in succession.
ALARM IN 1-4
Alarm input signals are supplied from external devices through
the ALARM IN connector to turn the camera to a preset position.
1. Move the cursor to ALARM IN 1* and select a preset position or
OFF by...

33
      ** PASSWORD? **
   0 1 2 3 4 5 6 7 8 9
          . . .
          
↑
OK  RESET
NEW PASSWORD
RET        
PASSWORD
    ** SPECIAL 1 **
PRIVACY ZONE   OFF(ENB)
PROPO.P/T      ON
AREA TITLE     ON(USER)
PATROL         STOP
ALARM IN/OUT
PASSWORD LOCK  ON 
CLEANING       OFF
EL-ZOOM        ON
PRESET ALM     OFF
IMAGE HOLD     OFF
RET
Special 1 menu
COAXIAL ALARM OUT
Alarm output signals are supplied through the coaxial cable.
1. Move the cursor to COAX ALM OUT and select ON or OFF.
2. Press the CAM...

34
3-5 To return to the SPECIAL 1 menu without verifying the pass-
word, move the cursor to RET, and press the CAM (SET) key.
New Password
4. To change the password in step 3-3 above, move the cursor from
OK to NEW PASSWORD, and press the CAM (SET) key. The NEW
PASSWORD menu appears.
Notes:
•The NEW PASSWORD menu is accessible only after the verifi-
cation has been completed.
•The following operations for NEW PASSWORD will not affect
the ON/OFF setting for PRIVACY ZONE on the SPECIAL 1
menu.
The up-arrow...

35
●Electronic Zoom (EL-ZOOM)
The electronic zoom magnifies a scene 10-fold. With a 22-fold optical
zoom lens, the camera is capable of 220-fold zoom.
1. Move the cursor to EL-ZOOM and select ON or OFF by moving
the joystick to the right or left, and then press the CAM (SET) key.
The factory default setting is ON.
ON:10 - fold electronic zoom is available with the ZOOM switch
on the controller.
OFF:The electronic zoom function is not used.
Notes:
•A scene magnified by the electronic zoom function may be...

36
ON:The last displayed still image is shown till the camera finishes
moving to a preset position. However, the still image may be
distorted with the effect of panning or tilting.
OFF:The current image is being displayed while the camera is
moving to a preset position.
■Camera Setting
To Display the Camera Setting Menu
•Move the cursor to CAMERA O, and press the CAM (SET) key.
The camera setting menu appears.
●Camera Identification (CAMERA ID)
1. Move the cursor to CAMERA ID, and select ON to display...

37
     CAMERA ID
     0123456789
     ABCDEFGHIJKLM
     NOPQRSTUVWXYZ
     ().,:;&#!?=
     +-*/%$
    SPACE
         POSI RET RESET
    CAM1............
    
     CAMERA ID
     0123456789
     ABCDEFGHIJKLM
     NOPQRSTUVWXYZ
     ().,:;&#!?=
     +-*/%$
    SPACE
         POSI RET RESET
    CAM1............
    
     ** SET UP **
CAMERA ID
ALC/MANUAL
SHUTTER
AGC
SENS UP
SYNC
WHITE BAL
MOTION DET
AF MODE
RET     SPECIAL2   OFF 
ALC 
OFF
ON(MID)
X2 AUTO
INT  
ATW1 
OFF
MANUAL S  
Camera setting menu...

38
(2) ALC Mode with BLC OFF
1. Move the cursor to BLC and select OFF. (When you select MANU-
AL, BLC is not available.) The MASK SET appears on the menu.
2. Move the cursor to MASK SET and press the CAM (SET) key. The
48 mask areas appear on the monitor screen. The cursor is blink-
ing in the top left corner of the screen.
3. To mask an area where backlight is bright, move the cursor to the
area and press the CAM (SET) key. The mask turns white. Repeat
this procedure to mask the desired area.
4. To...

39
●Shutter Speed Setting (SHUTTER)
1. Display SET UP MENU on the monitor screen by referring to page
16.
2. Move the cursor to SHUTTER and select the electronic shutter
speed by using the joystick. The factory default setting is OFF.
The electronic shutter speed changes as follows by using the joy-
stick:
●Gain Control (AGC)
1. Display SET UP MENU on the monitor screen by referring to page
16.
2. Move the cursor to AGC and select ON (LOW), ON (MID), ON
(HIGH) or (OFF) by using the joystick.
The factory...

40
●Synchronization (SYNC)
1. Display SET UP MENU on the monitor screen by referring to page
16.
2. Move the cursor to SYNC and select LL or INT by using the joy-
stick.
The factory default setting is INT.
Important Notices:
1. The priority of SYNC modes is as follows:
1. Multiplexed vertical drive (VD2) (highest priority)
2. Line-lock (LL)
3. Internal sync (INT) (lowest priority)
2. To use internal sync, select INT.
3. Whenever the vertical drive pulse (VD2) is supplied to the cam-
era, the camera sync...

41
8. Move the cursor to FINE by using the joystick.
9. Match the vertical phase for both video output signals as closely
as possible by using the joystick.
Notes:
•When the “|” cursor reaches the “+” end, it jumps back to “–”.
At the same time, COARSE is incremented by one step to
enable a continuous adjustment. The reverse takes place
when the “|” cursor reaches the “–” end.
•When the joystick is kept at the right or left for one second or
more, the “|” cursor moves quickly.
•To reset COARSE and FINE...