Panasonic Aj Spc700p Operating Instructions Manual

111
8
Chapter 8 Menu Description Tables (continued)
8-5-3 SHUTTER SELECT 8-5-4 USER SW

For each function of the USER switches, refer to [4-9-4
Assigning Functions to USER  MAIN, USER1 and USER2
Buttons].
The ____ in the Adjustable Range column indicates the
preset mode. 
Items/
Data Saved  Adjustable 
Range  Remarks 
SUPER V 
MODEFRM1FRM2Select the SUPER V switching mode. 
FRM1:
 Normal mode. 
FRM2:  After-image reduction mode. 

The SUPER V mode increases vertical 
resolution by directly outputting...

112
Chapter 8 Menu Description Tables (continued)
8-5-5 SW MODE 8-5-6 WHITE BALANCE MODE
The ____ in the Adjustable Range column indicates the
preset mode. 
Items/
Data Saved  Adjustable 
Range  Remarks 
RET SW RECCHECKCAM RET
Select the RET switch function. 
REC CHECK:
 Perform REC REVIEW. 
CAM RET:  Perform return signal output. 
–CUFE
S.BLK LVL OFF
–10
–20
–30
Set the super black level. 
–CUFE
AUTO KNEE 
SW ONOFFSelect whether or not to use the AUTO 
KNEE switch. 
SCUF E
SHD,ABB SW 
CTL ONOFFSelect...

113
8
Chapter 8 Menu Description Tables (continued)
8-5-7 USER SW GAIN
8-5-8 IRIS
8-6 MAIN OPERATION
8-6-1 BATTERY/P2CARD
The ____ in the Adjustable Range column indicates the
preset mode. 
Items/
Data Saved  Adjustable 
Range  Remarks 
S.GAIN
30 dB_•Select whether or not to enable 30dB 
for SUPER GAIN. 
_: Enable. 
 •  : Disable. 
–CUFE
36 dB_•Select whether or not to enable 36dB 
for SUPER GAIN. 
_ : Enable. 
 •  : Disable.
–CUFE
Items/
Data Saved  Adjustable 
Range  Remarks 
A.IRIS LEVEL 000 : 050 :...

114
Chapter 8 Menu Description Tables (continued)
8-6-2 BATTERY SETTING1
The ____ in the Adjustable Range column indicates the
preset mode. 
Items/
Data Saved  Adjustable 
Range  Remarks 
CARD NEAR 
END ALARMON
OFFSelect whether or not to set the alarm 
to beep for P2 CARD NEAR END 
ALARM. 
–CUF –
CARD NEAR 
END TIME  2min3minSet the remaining time to indicate the 
P2 CARD NEAR END TIME alarm. 
–CUF –
CARD END 
ALARM ONOFFSelect whether or not to set the alarm 
to beep for P2 CARD END ALARM. 
–CUF –...

115
8
Chapter 8 Menu Description Tables (continued)

The remaining battery capacity for digital batteries is
displayed as % inside the viewfinder (PRO14/TRIM14/
HYTRON50/HYTRON100/HYTRON120/DIONIC90/
DIONIC160/NP-L50/ENDURA50/ENDURA80). 
The BATT NEAR END alarm, however, is triggered
according to the setting on the 
screen, regardless of the % indication. 
The ____ in the Adjustable Range column indicates the
preset mode. 
Items/
Data Saved  Adjustable 
Range  Remarks 
DIONIC90_•Enable selection under...

116
Chapter 8 Menu Description Tables (continued)
8-6-3 BATTERY SETTING2 8-6-4 MIC/AUDIO1
The ____ in the Adjustable Range column indicates the
preset mode. 
Items/
Data Saved  Adjustable 
Range  Remarks 
NiCd14_•Enable selection under BATTERY 
SELECT. 
_
:Enable selection. 
 •  :Disable selection.
NEAR END 11.0 : 13.6 : 15.0
Set the NEAR END voltage in 0.1 V 
steps. 
END 11.0 : 13.2 : 15.0
When MANUAL is selected in the menu 
above, set the END voltage in 0.1 V 
steps. 
–CUF –
NiCd13_•Enable selection...

117
8
Chapter 8 Menu Description Tables (continued)
8-6-5 MIC/AUDIO2 8-6-6 TC/UB
The ____ in the Adjustable Range column indicates the
preset mode. 
Items/
Data Saved  Adjustable 
Range  Remarks 
FRONT MIC 
POWERONOFFSelect the phantom power supply for 
the front microphone. 
–CUF –
REAR MIC 
POWER ONOFFSelect the phantom power supply for 
the rear microphone. 
–CUF –
AU DIO O UT ONOFFSet the audio output circuit. 
OFF: Power-down output circuit to 
disable output. 
ON: Enable output. 
–CUF –
MONITOR...

118
Chapter 8 Menu Description Tables (continued)
8-6-7 UMID SET/INFO

Please refer to [4-5-6 Setting UMID Information] for the
UMID information setting. 
8-7 FILE
8-7-1 SD CARD READ/WRITE
The ____ in the Adjustable Range column indicates the
preset mode. 
Items/
Data Saved  Adjustable 
Range  Remarks 
FIRST REC TC PRESET
REGENFor the first recording after the power is 
turned on, a P2 card is inserted and 
then switching from this P2 card to 
another recording-target P2 card is 
performed, select...

119
8
Chapter 8 Menu Description Tables (continued)
8-7-2 SD CARD R/W SELECT 8-7-3 LENS FILE
8-7-4 SCENE
8-7-5 INITIALIZE
The ____ in the Adjustable Range column indicates the
preset mode. 
Items/
Data Saved  Adjustable 
Range  Remarks 
ID READ/
WRITEON
OFFSelect whether or not to include the 
CAMERA ID when reading out or 
writing to the SD memory card. 
–––F–
USER MENU 
SELECT R/W ONOFFSelect whether or not to include the 
FILE MENU settings when reading out 
or writing to the SD memory card. 
–––F–...

120
Chapter 8 Menu Description Tables (continued)
8-8 MAINTENANCE
8-8-1 SYSTEM CHECK
8-8-2 LENS ADJ
8-8-3 BLACK SHADING
8-8-4 WHITE SHADING8-8-5 DIAGNOSTIC1
The ____ in the Adjustable Range column indicates the
preset mode. 
Items/
Data Saved  Adjustable 
Range  Remarks 
COLOR CHECK ON
OFFON/OFF switching for checking proper 
operation of the camera-recorder. 
Displays the center Y and RGB levels 
on the viewfinder to indicate whether 
the signals have been properly 
processed and transmitted from the...