Panasonic Aj Spc700p Operating Instructions Manual

							
111
8
Chapter 8 Menu Description Tables (continued)
8-5-3 SHUTTER SELECT 8-5-4 USER SW

For each function of the USER switches, refer to [4-9-4
Assigning Functions to USER  MAIN, USER1 and USER2
Buttons].
The ____ in the Adjustable Range column indicates the
preset mode. 
Items/
Data Saved  Adjustable 
Range  Remarks 
SUPER V 
MODEFRM1FRM2Select the SUPER V switching mode. 
FRM1:
 Normal mode. 
FRM2:  After-image reduction mode. 

The SUPER V mode increases vertical 
resolution by directly outputting the 
photo-diode vertical signal from the 
CCD. FRM1 sets the accumulation level 
to 1/30th second. FRM sets the level to 
1/60th second, reducing sensitivity by 
half. 
–CUFE
POSITION1 
SEL 1/1001/120
1/250
1/500
1/1000
1/2000Select the shutter speed to be allocated 
to POSITION1. 
–CUFE
POSITION2 
SEL 1/100
1/120
1/250
1/500
1/1000
1/2000
Select the shutter speed to be allocated 
to POSITION2. 
–CUFE
POSITION3 
SEL 1/100
1/120
1/250
1/500
1/1000
1/2000
Select the shutter speed to be allocated 
to POSITION3. 
–CUFE
POSITION4 
SEL 1/100
1/120
1/250
1/500
1/1000
1/2000
Select the shutter speed to be allocated 
to POSITION4. 
–CUFE
POSITION5 
SEL 1/100
1/120
1/250
1/500
1/1000
1/2000
Select the shutter speed to be allocated 
to POSITION5. 
–CUFE
POSITION6 
SEL 1/100
1/120
1/250
1/500
1/1000
1/2000Select the shutter speed to be allocated 
to POSITION6. 
–CUFE
Items/
Data Saved  Adjustable 
Range  Remarks 
USER MAIN SW INH
S.GAIN
S.IRIS
I.OVR
S.BLK
B.STR
AT W
Y GET
NEWS-G.
AUDIO CH1
AUDIO CH2
REC SW
RET SW
SLOT SEL
PRE REC
USB
Allocate the USER MAIN button. 
–CUFE
USER1 SW INH S.GAIN
S.IRIS
I.OVR
S.BLK
B.STR
AT W
Y GET
NEWS-G.
AUDIO CH1
AUDIO CH2
REC SW
RET SW
SLOT SEL
PRE REC
USB
Allocate the USER1 button. 
–CUFE
USER2 SW INHS.GAIN
S.IRIS
I.OVR
S.BLK
B.STR
AT W
Y GET
NEWS-G.
AUDIO CH1
AUDIO CH2
REC SW
RET SW
SLOT SEL
PRE REC
USBAllocate the USER2 button. 
–CUFE
#,52%2
PINKUJDQQMMo+9
						

							
112
Chapter 8 Menu Description Tables (continued)
8-5-5 SW MODE 8-5-6 WHITE BALANCE MODE
The ____ in the Adjustable Range column indicates the
preset mode. 
Items/
Data Saved  Adjustable 
Range  Remarks 
RET SW RECCHECKCAM RET
Select the RET switch function. 
REC CHECK:
 Perform REC REVIEW. 
CAM RET:  Perform return signal output. 
–CUFE
S.BLK LVL OFF
–10
–20
–30
Set the super black level. 
–CUFE
AUTO KNEE 
SW ONOFFSelect whether or not to use the AUTO 
KNEE switch. 
SCUF E
SHD,ABB SW 
CTL ONOFFSelect whether or not to enable the 
automatic black shading adjustment if 
the ABB switch has been pressed for 5 
seconds or more. 
–CUFE
COLOR BARS SMPTEFULL
BARS
SPLIT
ARIBSelect the color bars to use. 
SMPTE: Use the SMPTE color bars. 
FULL BARS:Use full color bars. 
SPLIT: Use SPLIT color bars. 
ARIB: Use ARIB multi-format 
color bars. 
–CUFE
S.GAIN OFF L/M/HS.GAINSelect when the SUPER GAIN mode is 
disabled. 
L/M/H: Disabled when the gain selector 
switch is operated. 
S.GAIN:Disabled only with the S.GAIN 
switch (USER button). 
–CUFE
ECU DATA 
SAVE ON
OFFON:
Store the values set and adjusted 
with the ECU when the ECU is 
disconnected from the camera-
recorder. 
OFF: Does not store camera-related 
set values. 
–CUF –
ECU REC CHK 
SW R.REVIEWPLAYSelect the camera-recorder operation 
to be performed when the ECU REC 
CHECK button is pressed.
R.REVIEW:
Perform REC REVIEW. 
PLAY: Play back the most-recently 
recorded clip from the 
beginning. 
–CUFE
Items/
Data Saved  Adjustable 
Range  Remarks
FILTER INH ONOFFSelect whether or not to retain white 
balance memory (A/B) data for 
individual filters. 
ON:
Retain data in the A/B memory (2 
memory areas) regardless of the 
filters. 
OFF: Retain data for individual filters. 
–CUFE
SHOCKLESS 
AWB OFF
FA S T
NORMAL
SLOW1
SLOW2
SLOW3
Set SHOCKLESS AWB to ON (FAST/
NORMAL/SLOW1-3) or OFF. 
SHOCKLESS AWB eliminates the 
shock caused by switching the WHITE 
BAL switch’s PRST/A/B setting. The 
switching time can also be selected. 
–CUFE
AWB AREA 25%50%
90%Switch the AWB detection area. 
25%: Detect 25% of area around the 
screen center. 
50%: Detect 50% of area around the 
screen center. 
90%: Detect 90% of area in the full 
screen. 
–CUFE
AWB & ABB 
OFFSET ON
OFFSelect whether or not to reset the GAIN 
and PED values in the ROP menu 
when AWB and ABB are executed. 
ON:
Do not reset. 
OFF: Reset values. 
–CUFE
COLOR TEMP 
PRE 3200K : 5600K
Set the AWB PRE color temperature. 
–CUFE
AWB  A MEMVA RSelect the function to be allocated to 
WHITE BAL switch A. 
MEM: Function to store values set by 
executing the auto white 
balance. 
VAR: Function to apply color 
temperature set by COLOR 
TEMP A. 
–CUFE
COLOR TEMP 
A 3200K : 5600K
Set the color temperature when VAR is 
selected under AWB A. 
–CUFE
AWB  B MEMVA R
AT WSelect the function to be allocated to 
WHITE BAL switch B. 
MEM: Function to store values set by 
executing auto white balance. 
VAR: Function to apply color 
temperature set by COLOR 
TEMP B. 
AT W : Function to execute auto-
tracking white balance.
–CUFE
COLOR TEMP 
B 3200K : 5600K
Set the color temperature when VAR is 
selected under AWB B. 
–CUFE
ATW SPEED NORMALSLOW
FA S TSelect the control speed for the auto-
tracking white balance. 
–CUFE
#,52%2
PINKUJDQQMMo+9
						

							
113
8
Chapter 8 Menu Description Tables (continued)
8-5-7 USER SW GAIN
8-5-8 IRIS
8-6 MAIN OPERATION
8-6-1 BATTERY/P2CARD
The ____ in the Adjustable Range column indicates the
preset mode. 
Items/
Data Saved  Adjustable 
Range  Remarks 
S.GAIN
30 dB_•Select whether or not to enable 30dB 
for SUPER GAIN. 
_: Enable. 
 •  : Disable. 
–CUFE
36 dB_•Select whether or not to enable 36dB 
for SUPER GAIN. 
_ : Enable. 
 •  : Disable.
–CUFE
Items/
Data Saved  Adjustable 
Range  Remarks 
A.IRIS LEVEL 000 : 050 : 100
Set the target value for auto iris. 
–CUFE
A.IRIS PEAK/
AV E 000 : 040 : 100
Determine the peak-to-standard ratio 
for the auto iris. 
A larger value sets the auto iris to 
respond to the peak in the IRIS 
detection window, while a smaller value 
sets it to respond to the average value 
in the window. 
–CUFE
A.IRIS MODE NORM1
NORM2
CENTR
Select the auto iris detection window. NORM1:The window closer to the center 
of the screen. 
NORM2: The window closer to bottom of 
the screen. 
CENTR: The spot window in the center of 
the screen. 
–CUFE
S.IRIS LEVEL 000 : 080 : 100
Set the target value for the super iris. 
–CUFE
IRIS GAIN CAM LENSSelect which unit controls IRIS GAIN. 

Lenses with an extender, such as C2, 
C 0.8 sold before FUJINON DIGI 
POWER, perform IRIS compensation 
while enabling the extender. Therefore, 
if this setting is switched to CAM, the 
camera’s iris control will not operate 
properly. 
–CUFE
IRIS GAIN 
VA L U E 01 : 08 : 20
Set the adjustable value for IRIS GAIN. 
This setting is effective when CAM is 
selected for IRIS GAIN. 
–CUFE
Items/
Data Saved  Adjustable 
Range  Remarks 
BATTERY 
SELECTPRO14TRIM14
HYTRON50
HYTRON100
HYTRON120
DIONIC90
DIONIC160
HP-90L
BP-H120
NP-L50
ENDURA50
ENDURA80
BP-L60/90
NiCd14
NiCd13
NiCd12
TYPE A
TYPE BSelect the battery to use. Remaining 
capacity detection is also performed 
according to the selected battery. 
The selectable battery types change 
depending on the settings under [8-6-2 
BATTERY SETTING1] and [8-6-3 
BATTERY SETTING2]. 
–CUF –
EXT DC IN 
SELECT AC_ADPTPRO14
TRIM14
HYTRON50
HYTRON100
HYTRON120
DIONIC90
DIONIC160
HP-90L
BP-H120
NP-L50
ENDURA50
ENDURA80
BP-L60/90
NiCd14
NiCd13
NiCd12
TYPE A
TYPE BSet the remaining capacity detection 
type when a battery is connected to the 
DC IN connector. Remaining capacity 
detection is also performed according 
to the selected battery type. 
The selectable battery types change 
depending on the settings under [8-6-2 
BATTERY SETTING1] and [8-6-3 
BATTERY SETTING2]. 

The % display is disabled even when a 
digital battery is connected to the DC IN 
connector. 
–CUF –
BATT NEAR 
END ALARM ON
OFFSelect whether or not to set the alarm 
to beep for BATT NEAR END ALARM. 
–CUF –
BATT NEAR 
END CANCEL ONOFFIf set to ON, the warning tone and 
indication can be canceled by pressing 
the MODE CHECK button when BATT 
NEAR END ALARM is triggered. 
–CUF –
BATT END 
ALARM ONOFFSelect whether or not to set the alarm 
to beep for BATT END ALARM. 
–CUF –
BATT REMAIN 
FULL 70%100%Set the display content of the remaining 
battery capacity indicator bars in the 
display window when using a digital 
battery. 
70%:
 Indicate FULL at 70% capacity. 
100%: Indicate FULL at 100% capacity. 
–CUF –
#,52%2
PINKUJDQQMMo+9
						

							
114
Chapter 8 Menu Description Tables (continued)
8-6-2 BATTERY SETTING1
The ____ in the Adjustable Range column indicates the
preset mode. 
Items/
Data Saved  Adjustable 
Range  Remarks 
CARD NEAR 
END ALARMON
OFFSelect whether or not to set the alarm 
to beep for P2 CARD NEAR END 
ALARM. 
–CUF –
CARD NEAR 
END TIME  2min3minSet the remaining time to indicate the 
P2 CARD NEAR END TIME alarm. 
–CUF –
CARD END 
ALARM ONOFFSelect whether or not to set the alarm 
to beep for P2 CARD END ALARM. 
–CUF –
CARD REMAIN/„3min/„5min/„ Set the length of time for one segment 
(
„ ) of the P2 card’s remaining capacity 
indicator bars. 
3min/ „:One segment represents 3 
minutes. 
5min/ „:One segment represents 5 
minutes. 
–CUF –
Items/
Data Saved  Adjustable 
Range  Remarks
PRO14_•Enable selection under BATTERY 
SELECT. 
_
:Enable selection. 
 •  :Disable selection.
MANUAL
AU TOSelect auto or manual to set the NEAR 
END voltage. 
MANUAL: Set voltage manually. 
AUTO: Set voltage automatically. 
11.0 : 13.9 : 15.0
When MANUAL is selected in the 
above menu, set the NEAR END 
voltage in 0.1 V steps. 
–CUF –
TRIM14_•Enable selection under BATTERY 
SELECT. 
_ :Enable selection. 
 •  :Disable selection.
MANUAL
AU TOSelect auto or manual to set the NEAR 
END voltage. 
MANUAL: Set voltage manually. 
AUTO: Set voltage automatically. 
11.0 : 13.6 : 15.0
When MANUAL is selected in the menu 
above, set the NEAR END voltage in 
0.1 V steps. 
–CUF –
HYTRON50_•Enable selection under BATTERY 
SELECT. 
_ :Enable selection. 
 •  :Disable selection.
MANUAL
AU TOSelect auto or manual to set the NEAR 
END voltage. 
MANUAL: Set voltage manually. 
AUTO: Set voltage automatically. 
11.0 : 13.1 : 15.0
When MANUAL is selected in the menu 
above, set the NEAR END voltage in 
0.1 V steps. 
–CUF –
HYTRON100_•Enable selection under BATTERY 
SELECT. 
_ :Enable selection. 
 •  :Disable selection.
MANUAL
AU TOSelect auto or manual to set the NEAR 
END voltage. 
MANUAL: Set voltage manually. 
AUTO: Set voltage automatically. 
11.0 : 13.2 : 15.0
When MANUAL is selected in the menu 
above, set the NEAR END voltage in 
0.1 V steps. 
–CUF –
HYTRON120_•Enable selection under BATTERY 
SELECT. 
_ :Enable selection. 
 •  :Disable selection.
MANUAL
AU TOSelect auto or manual to set the NEAR 
END voltage. 
MANUAL: Set voltage manually. 
AUTO: Set voltage automatically. 
11.0 : 13.1 : 15.0
When MANUAL is selected in the menu 
above, set the NEAR END voltage in 
0.1 V steps. 
–CUF –
#,52%2
PINKUJDQQMMo+9
						

							
115
8
Chapter 8 Menu Description Tables (continued)

The remaining battery capacity for digital batteries is
displayed as % inside the viewfinder (PRO14/TRIM14/
HYTRON50/HYTRON100/HYTRON120/DIONIC90/
DIONIC160/NP-L50/ENDURA50/ENDURA80). 
The BATT NEAR END alarm, however, is triggered
according to the setting on the 
screen, regardless of the % indication. 
The ____ in the Adjustable Range column indicates the
preset mode. 
Items/
Data Saved  Adjustable 
Range  Remarks 
DIONIC90_•Enable selection under BATTERY 
SELECT. 
_
:Enable selection. 
 •  :Disable selection.
MANUAL
AUTOSelect auto or manual to set the NEAR 
END voltage. 
MANUAL: Set voltage manually. 
AUTO: Set voltage automatically. 
11.0 : 13.6 : 15.0
When MANUAL is selected in the menu 
above, set the NEAR END voltage in 
0.1 V steps. 
–CUF –
 DIONIC160_•Enable selection under BATTERY 
SELECT. 
_ :Enable selection. 
 •  :Disable selection.
MANUAL
AUTOSelect auto or manual to set the NEAR 
END voltage. 
MANUAL: Set voltage manually. 
AUTO: Set voltage automatically. 
11.0 : 13.3 : 15.0
When MANUAL is selected in the menu 
above, set the NEAR END voltage in 
0.1 V steps. 
–CUF –
HP-90L_•Enable selection under BATTERY 
SELECT. 
_ :Enable selection. 
 •  :Disable selection.
MANUAL
AUTOSelect auto or manual to set the NEAR 
END voltage. 
MANUAL: Set voltage manually. 
AUTO: Set voltage automatically. 
11.0 : 12.8 : 15.0
When MANUAL is selected in the menu 
above, set the NEAR END voltage in 
0.1 V steps. 
–CUF –
BP-H120_•Enable selection under BATTERY 
SELECT. 
_ :Enable selection. 
 •  :Disable selection.
MANUAL
AUTOSelect auto or manual to set the NEAR 
END voltage. 
MANUAL: Set voltage manually. 
AUTO: Set voltage automatically. 
11.0 : 11.5 : 15.0
When MANUAL is selected in the menu 
above, set the NEAR END voltage in 
0.1 V steps. 
–CUF –
NP-L50_•Enable selection under BATTERY 
SELECT. 
_ :Enable selection. 
 •  :Disable selection.
MANUAL
AUTOSelect auto or manual to set the NEAR 
END voltage. 
MANUAL: Set voltage manually. 
AUTO: Set voltage automatically. 
11.0 : 13.3 : 15.0
When MANUAL is selected in the menu 
above, set the NEAR END voltage in 
0.1 V steps. 
–CUF –
Items/
Data Saved  Adjustable 
Range  Remarks 
ENDURA50_•Enable selection under BATTERY 
SELECT. 
_
:Enable selection. 
 •  :Disable selection.
MANUAL
AUTOSelect auto or manual to set the NEAR 
END voltage. 
MANUAL: Set voltage manually. 
AU TO: Set voltage automatically. 
11.0 : 13.1 : 15.0
When MANUAL is selected in the menu 
above, set the NEAR END voltage in 
0.1 V steps. 
–CUF –
ENDURA80_•Enable selection under BATTERY 
SELECT. 
_ :Enable selection. 
 •  :Disable selection.
MANUAL
AUTOSelect auto or manual to set the NEAR 
END voltage. 
MANUAL: Set voltage manually. 
AU TO: Set voltage automatically. 
11.0 : 13.5 : 15.0
When MANUAL is selected in the menu 
above, set the NEAR END voltage in 
0.1 V steps. 
–CUF –
BP-L60/90_•Enable selection under BATTERY 
SELECT. 
_ :Enable selection. 
 •  :Disable selection.
MANUAL
AUTOSelect auto or manual to set the NEAR 
END voltage. 
MANUAL: Set voltage manually. 
AU TO: Set voltage automatically. 
11.0 : 11.2 : 15.0
When MANUAL is selected in the menu 
above, set the NEAR END voltage in 
0.1 V steps. 
–CUF –
#,52%2
PINKUJDQQMMo+9
						

							
116
Chapter 8 Menu Description Tables (continued)
8-6-3 BATTERY SETTING2 8-6-4 MIC/AUDIO1
The ____ in the Adjustable Range column indicates the
preset mode. 
Items/
Data Saved  Adjustable 
Range  Remarks 
NiCd14_•Enable selection under BATTERY 
SELECT. 
_
:Enable selection. 
 •  :Disable selection.
NEAR END 11.0 : 13.6 : 15.0
Set the NEAR END voltage in 0.1 V 
steps. 
END 11.0 : 13.2 : 15.0
When MANUAL is selected in the menu 
above, set the END voltage in 0.1 V 
steps. 
–CUF –
NiCd13_•Enable selection under BATTERY 
SELECT. 
_ :Enable selection. 
 •  :Disable selection. 
NEAR END 11.0 : 12.7 : 15.0
Set the NEAR END voltage in 0.1 V 
steps. 
END 11.0 : 12.2 : 15.0
When MANUAL is selected in the menu 
above, set the END voltage in 0.1 V 
steps. 
–CUF –
NiCd12_•Enable selection under BATTERY 
SELECT. 
_ :Enable selection. 
 •  :Disable selection.
NEAR END 11.0 : 11.5 : 15.0
Set the NEAR END voltage in 0.1 V 
steps. 
END 11.0 : 11.2 : 15.0
When MANUAL is selected in the menu 
above, set the END voltage in 0.1 V 
steps. 
–CUF –
TYPE A_•Enable selection under BATTERY 
SELECT. 
_ :Enable selection. 
 •  :Disable selection. 
FULL 12.0 : 15.0 : 17.0
Set the voltage to display the FULL 
indication in 0.1 V steps. 
NEAR END 11.0 : 13.6 : 15.0
Set the NEAR END voltage in 0.1 V 
steps. 
END 11.0 : 13.2 : 15.0
When MANUAL is selected in the menu 
above, set the END voltage in 0.1 V 
steps. 
–CUF –
TYPE B_•Enable selection under BATTERY 
SELECT. 
_ :Enable selection. 
 •  :Disable selection. 
FULL 12.0 : 13.5 : 17.0
Set the voltage to display the FULL 
indication in 0.1 V steps. 
NEAR END 11.0 : 11.8 : 15.0
Set the NEAR END voltage in 0.1 V 
steps. 
END 11.0 : 11.1 : 15.0
When MANUAL is selected in the menu 
above, set the END voltage in 0.1 V 
steps. 
–CUF –
Items/
Data Saved  Adjustable 
Range  Remarks
FRONT VR CH1 OFFFRONT
W. L .
REAR
ALLSelect whether or not to enable the 
FRONT AUDIO LEVEL control for the 
signal selected as the input signal to 
AUDIO CH1.
OFF:
Disabled for any input selected. 
Recording level does not 
change by turning the volume 
control. 
FRONT:Only enabled when FRONT is 
selected. 
W. L . : Only enabled when WIRELESS 
is selected. 
REAR: Only enabled when REAR is 
selected. 
ALL: Enabled for any input selected. 
–CUF –
FRONT VR CH2 OFFFRONT
W. L .
REAR
ALLSelect whether or not to enable the 
FRONT AUDIO LEVEL control for the 
signal selected as an input signal to 
AUDIO CH2. 
OFF: Disabled for any input selected. 
Recording level does not 
change by turning the volume 
control. 
FRONT:Only enabled when FRONT is 
selected. 
W. L . : Only enabled when WIRELESS 
is selected. 
REAR: Only enabled when REAR is 
selected. 
ALL: Enabled for any input selected. 
–CUF –
MIC LOWCUT 
CH1 OFFFRONT
W. L .
REARSelect the microphone low-cut filter. 
–CUF –
MIC LOWCUT 
CH2 OFFFRONT
W. L .
REARSelect the microphone low-cut filter. 
–CUF –
LIMITER CH1 ON OFFSelect the limiter. 
–CUF –
LIMITER CH2 ON OFFSelect the limiter. 
–CUF –
25M REC CH 
SEL 2CH4CHSelect the audio channels to be 
recorded in the DVCPRO and DV 
for mats. 
2CH:
Only recorded in CH1 and CH2. 
4CH: Recorded in all channels from 
CH1 to CH4. 
–CUF –
TEST TONE OFF
NORMAL
ALWAYS
CHSEL
Select the test signal. 
OFF:Disable test tone output. 
NORMAL:Output test tones to CH1/2 
when the OUTPUT/AUTO 
KNEE selector switch is set to 
BARS and the AUDIO IN 
switch CH1 is set to FRONT. 
ALWAYS:Output test tones to CH1/2 when 
OUTPUT/AUTO KNEE selector 
switch is set to BARS. 
CHSEL: Output test tone to the 
channels where the AUDIO 
IN switch CH1 or CH2 is set 
to FRONT when OUTPUT/
AUTO KNEE selector switch 
is set to BARS. The test tone 
is not output to CH3 and CH4. 
–CUF –
#,52%2
PINKUJDQQMMo+9
						

							
117
8
Chapter 8 Menu Description Tables (continued)
8-6-5 MIC/AUDIO2 8-6-6 TC/UB
The ____ in the Adjustable Range column indicates the
preset mode. 
Items/
Data Saved  Adjustable 
Range  Remarks 
FRONT MIC 
POWERONOFFSelect the phantom power supply for 
the front microphone. 
–CUF –
REAR MIC 
POWER ONOFFSelect the phantom power supply for 
the rear microphone. 
–CUF –
AU DIO O UT ONOFFSet the audio output circuit. 
OFF: Power-down output circuit to 
disable output. 
ON: Enable output. 
–CUF –
MONITOR 
SELECT STEREOMIXSelect the signal format for output to 
the PHONE (earphones) jack.
–CUF –
FRONT MIC 
LEVEL –40dB–50dBSelect the front microphone input level. 
–CUF –
REAR MIC CH1 
LV L –50dB
–60dBSelect the rear microphone input level. 
–CUF –
REAR MIC CH2 
LV L –50dB
–60dBSelect the rear microphone input level. 
–CUF –
REAR LINE IN 
LV L –3dB
0dB
+4dBSelect the rear line input level. 
–CUF –
AU DIO O UT  LVL – 3d B 0dB
+4dBSelect the audio output level. 
–CUF –
HEADROOM 18dB 20dBSet the headroom (standard level). 
–CUF –
WIRELESS 
WARN ON
OFFSelect whether or not to enable the 
alarm to trigger for poor wireless 
receiver reception. 
–CUF –
Items/
Data Saved  Adjustable 
Range  Remarks 
TC MODE DFNDFSet the time code mode. 
DF:
 Drop frame. 
NDF:  Non drop frame.
–CUF –
UB MODE USERTIME
DAT E
EXT
TCG
FRM RATE
REGENSelect the user bits mode. 
USER: Select UB value set in the LCD 
section. 
TIME: Select local time (hours, 
minutes, seconds). 
DATE: Select local date and time (2 last 
digits of year, month, date, 
time). 
EXT: When “CAM” or “VIDEO” is 
selected in the menu option 
REC SIGNAL in the SYSTEM 
MODE screen, user’s bit input to 
the TC IN connector is the 
reference.
When “1394” is selected, user’s 
bit input to the DVCPRO/DV 
connector is the reference. 
If reading fails, USER value is 
retained.
TCG: TCG value enters UB. 
FRM RATE: Select same camera shoting 
information (frame rate, etc.) with 
the VAUX UB (VITC UB). 
REGEN:Read out value stored in the 
card and record value 
continuously. 
–CUF –
VITC UB MODE USER/EXT
TIME
DAT E
TCG
FRM RATE
REGEN
Select the user bits mode for VAUX TC 
(VITC). 
USER/EXT:If UB MODE is set to EXT, the 
EXT value is recorded. If not, 
USER value set by UB is 
recorded. 
TIME: Select local time (hours, 
minutes, seconds). 
DATE: Select local date and time (2 last 
digits of year, month, date, 
time). 
TCG: TCG value enters UB. 
FRM RATE: Select same camera shoting 
information (frame rate, etc.) with 
the VAUX UB (VITC UB). 
REGEN:Read out value stored in card 
and record value continuously. 
–CUF –
TCG SET HOLD ON
OFFON/OFF switching for the feature that 
always starts recording (when the 
power is turned ON again) the TCG 
value that was set before the power is 
turned OFF. 
–CUF –
#,52%2
PINKUJDQQMMo+9
						

							
118
Chapter 8 Menu Description Tables (continued)
8-6-7 UMID SET/INFO

Please refer to [4-5-6 Setting UMID Information] for the
UMID information setting. 
8-7 FILE
8-7-1 SD CARD READ/WRITE
The ____ in the Adjustable Range column indicates the
preset mode. 
Items/
Data Saved  Adjustable 
Range  Remarks 
FIRST REC TC PRESET
REGENFor the first recording after the power is 
turned on, a P2 card is inserted and 
then switching from this P2 card to 
another recording-target P2 card is 
performed, select whether or not to 
regenerate the time code as the value 
on the new P2 card.
PRESET:Use the camera-recorder’s internal 
time code. 
REGEN:For clips recorded on the 
recording-target P2 card, 
regenerate the time code as the 
time code of the clip that has the 
most recent date and time. 

Set the date and time accurately. For 
guidance on setting, see [4-5-2 Setting 
the Internal Clock’s Date and Time].
–CUF –
P.OFF LCD 
DISPLAY ONOFFSelect whether or not to display the 
time code setting and counter 
indication on the LCD monitor when the 
power is turned OFF. 
ON:
Display setting and indication 
while the power is turned OFF. 
OFF: Power-down LCD monitor while 
camera power is turned OFF. 
Setting and indication disabled. 
–CUF –
TC OUT TCGTCG/TCRSelect the time code to be output to the 
time code output connector. 
TCG: Always output time code 
generator value. 
TCG/TCR: Display time code generator value 
in E-E mode, and time code 
reader value in V-V mode. 
–CUF –
Items/
Data Saved  Adjustable 
Range  Remarks 
COUNTRY NO-INFOInput the user’s country. NO-INFO is 
displayed until the input completes. 
–CUF –
ORGANIZATIONNO-INFOInput the user’s organisation or 
company name. NO-INFO is displayed 
until the input completes. 
–CUF –
USER NO-INFOInput the user name. NO-INFO is 
displayed until the input completes. 
–CUF –
DEVICE NODEIndicate the product ID number. 
–––––
Items/
Data Saved  Adjustable 
Range  Remarks
R.SELECT 1 : 
8Select the file number to read out. 
–––F–
READRead out the data from the SD memory 
card. 
–––––
W. S E L E C T 1 : 
8Select the file number to write in. 
–––F–
WRITEWrite the camera-recorder’s menu data 
to the SD memory card.
–––––
CARD CONFIGFormat the SD memory card. 
–––––
TITLE READRead out the title of the data recorded 
on the SD memory card. 
–––––
TITLE1-8:Up to 8 letters can be set for the title 
name. 
–––––
#,52%2
PINKUJDQQMMo+9
						

							
119
8
Chapter 8 Menu Description Tables (continued)
8-7-2 SD CARD R/W SELECT 8-7-3 LENS FILE
8-7-4 SCENE
8-7-5 INITIALIZE
The ____ in the Adjustable Range column indicates the
preset mode. 
Items/
Data Saved  Adjustable 
Range  Remarks 
ID READ/
WRITEON
OFFSelect whether or not to include the 
CAMERA ID when reading out or 
writing to the SD memory card. 
–––F–
USER MENU 
SELECT R/W ONOFFSelect whether or not to include the 
FILE MENU settings when reading out 
or writing to the SD memory card. 
–––F–
SYSTEM MENU 
R/W ONOFFSelect whether or not to include the set 
values on the SYSTEM SETTING page 
when reading out or writing to the SD 
memory card. 
–––F–
PA I N T  M E N U  
LEVEL R/W ONOFFSelect whether or not to include the 
adjusted values on the PAINT page 
when reading out or writing to the SD 
memory card. 
–––F–
PA I N T  M E N U  
SW(„) R/W ONOFFSelect whether or not to include the set 
values on the PAINT MENU page when 
reading out or writing to the SD 
memory card. 
–––F–
PA I N T  ( F L A R E )  
R/W ON
OFFSelect whether or not to include the set 
values on the FLARE page when 
reading out or writing to the SD 
memory card. 
–––F–
VF MENU 
R/W ONOFFSelect whether or not to include the set 
values on the VF page when reading 
out or writing to the SD memory card. 
–––F–
CAM OPE 
MENU R/W ONOFFSelect whether or not to include the set 
values on the CAM OPERATION page 
when reading out or writing to the SD 
memory card. 
–––F–
MAIN OPE 
MENU R/W ONOFFSelect whether or not to include the set 
values on the MAIN OPERATION page 
when reading out or writing to the SD 
memory card. 
–––F–
MAINTE MENU 
R/W ONOFFSelect whether or not to include the set 
values on the MAINTENANCE page 
when reading out or writing to the SD 
memory card. 
–––F–
Items/
Data Saved  Adjustable 
Range  Remarks 
FILE NO. 1 : 
8Select the lens file number. 
–––––
READRead the lens file data. 
–––––
WRITEWrite the lens file data. 
–––––
TITLE1-8Up to 12 letters can be set for the title 
name. 
–––––
Items/
Data Saved  Adjustable 
Range  Remarks 
READ USER 
DATARead out the data from the user area in 
the memory. 
–––––
SCENE SEL 1 : 
4Select the scene file. 
–––––
READRead the scene file. 
–––––
WRITEWrite the scene file. 
–––––
RESETReset the scene file values to the initial 
values. 
–––––
TITLE 1-4Create the scene file title. 
–––––
Items/
Data Saved  Adjustable 
Range  Remarks 
READ 
FAC TO RY  DATAThe menu (USER MENU, MAIN MENU, 
OPTION MENU) values are all reset to 
factory settings. 
–––––
WRITE USER 
DATASave the user preference menu data in 
the camera’s internal memory. 
–––––
RESET LENS 
FILESReset the lens file data to the factory 
settings. 
–––––
#,52%2
PINKUJDQQMMo+9
						

							
120
Chapter 8 Menu Description Tables (continued)
8-8 MAINTENANCE
8-8-1 SYSTEM CHECK
8-8-2 LENS ADJ
8-8-3 BLACK SHADING
8-8-4 WHITE SHADING8-8-5 DIAGNOSTIC1
The ____ in the Adjustable Range column indicates the
preset mode. 
Items/
Data Saved  Adjustable 
Range  Remarks 
COLOR CHECK ON
OFFON/OFF switching for checking proper 
operation of the camera-recorder. 
Displays the center Y and RGB levels 
on the viewfinder to indicate whether 
the signals have been properly 
processed and transmitted from the 
optical system to the digital system. 
–––––
Items/
Data Saved  Adjustable 
Range  Remarks 
F2.8 ADJ ON
OFFThe iris is only set to F2.8 when this 
item set to ON. 
–––––
F16 ADJ ON OFFThe iris is only set to F16 when this 
item set to ON. 
–––––
Items/
Data Saved  Adjustable 
Range  Remarks 
CORRECT ONOFFON/OFF switching for digital black 
shading compensation. 
–CUFE
DETECTION
(DIG) –Execute digital black shading 
compensation. 
–––––
Items/
Data Saved  Adjustable 
Range  Remarks 
CORRECT ONOFFON/OFF switching for white shading 
compensation. 
–CUFE
DETECTION
(V SAW) –Execute white shading compensation. 
–––––
Items/
Data Saved  Adjustable 
Range  Remarks
CAMSOFT(IN)Display the software version for the 
microprocessor-controlled flash. 
–––––
CAMSOFT
(OUT)Display the software version for the 
external flash. 
–––––
CAM TABLEDisplay the table version. 
–––––
FONT ROMDisplay the character font version. 
–––––
CAM DSP CPLDDisplay the program version for the 
CPLD (Complex Programmable Logic 
Device) that processes camera block 
signals. 
–––––
CAM SYS 
FPGADisplay the program version for the 
FPGA (Field Programmable Gate 
Array) that processes camera block 
signals. 
–––––
PULSE FPGADisplay the program version for the 
FPGA that processes the CCD 
scanning. 
–––––
#,52%2
PINKUJDQQMMo+9