Panasonic Aj Spc700p Operating Instructions Manual

							
101
8
Chapter 8 Menu Description Tables (continued)
8-2-5 LCD MONITOR 8-2-6 GENLOCK
The ____ in the Adjustable Range column indicates the
preset mode. 
Items/
Data Saved  Adjustable 
Range  Remarks 
BRIGHTNESS –7 : +0 : +7
Adjust the LCD monitor brightness. 
–CUF –
COLOR LEVEL –7 : +0 : +7
Adjust the LCD monitor chroma level. 
–CUF –
CONTRAST –7 : +0 : +7
Adjust the LCD monitor contrast. 
–CUF –
BACKLIGHT NORMALHIGHSelect whether or not to set the LCD 
monitor brightness to always high. 
NORMAL: The brightness changes 
according to the 
BRIGHTNESS setting. 
HIGH: Set to always high. 
–CUF –
SELF SHOOT NORMAL
MIRRORSelect whether or not to change the 
LCD monitor to mirror image. 
NORMAL:Do not change to mirror 
image. 
MIRROR: Change to mirror image. 
–CUF –
ASPECT CONV. SQUEEZELT. B OXSelect a screen ratio for images 
displayed on the LCD monitor. 
SQEEZE: Display images in the squeeze 
size. 
LT. B O X: Display images in the letter 
box size. 

This item is enabled only when 
ASPECT described in “8-2-1 SYSTEM 
MODE” is set to16:9.
–CUF –
Items/
Data Saved  Adjustable 
Range  Remarks 
GENLOCK INTEXTSwitch the camera synchronising 
signal. 
INT:
Synchronise with the internal 
reference signal regardless of the 
reference signal input to the 
GENLOCK IN terminal. 
EXT: Synchronise with the reference 
signal input to the GENLOCK IN 
terminal.
–CUFE
H PHASE 
COARSE –50 : +00 : +50
Perform coarse phase adjustment for 
horizontal hold when configuring a 
system. 
–––––
H PHASE FINE –160 : +000 : +160
Perform fine phase adjustment for 
horizontal hold when configuring a 
system. 

This adjustment simultaneously shifts 
the SC phase. 
–––––
SC PHASE 
COARSE 0
1
 : 3
Perform coarse SC PHASE adjustment 
when GENLOCK is set. 
–––––
SC PHASE 
FINE –75 : +00 : +75
Perform fine SC PHASE adjustment 
when GENLOCK is set. 

When adjusting GENLOCK, please 
adjust H PHASE first, and then adjust 
SC PHASE. 
–––––
#,52%2
PINKUJDQQMMo+9
						

							
102
Chapter 8 Menu Description Tables (continued)
8-3 PAINT
8-3-1 ROP 8-3-2 MATRIX

The items indicated by „ are the setting items for PAINT
MENU SW( „) R/W in the 
screen. The items without  „ are the setting items for PAINT
MENU LEVEL R/W. 
Please refer to [8-7-2 SD CARD R/W SELECT] for more
information. 
The ____ in the Adjustable Range column indicates the
preset mode. 
Items/
Data Saved  Adjustable 
Range  Remarks 
MASTER PED –200 : +005 : +200
Set the master pedestal level. 
SCUF E
MASTER DTL –31 : +00 : +31
Set the H Detail and V Detail levels.
SCUF E
MASTER 
GAMMA 0.35 : 0.45 : 0.75
Set MASTER GAMMA in 0.01 steps. 
SCUF E
KNEE POINT 70.0% : 85 0% : 107.0%
Set the KNEE POINT position in 0.5% 
steps. 
SCUF E
KNEE SLOPE 0 : 50 : 99
Set the KNEE slope. 
SCUF E
R GAIN –200 : +000 : +200
Set the Rch gain. 
SCUF E
G GAIN –200 : +000 : +200
Set the Gch gain. 
SCUF E
B GAIN –200 : +000 : +200
Set the Bch gain. 
SCUF E
R PEDESTAL –100 : +000 : +100
Set the Rch pedestal level. 
SCUF E
G PEDESTAL –100 : +000 : +100
Set the Gch pedestal level. 
SCUF E
B PEDESTAL –100 : +000 : +100
Set the Bch pedestal level. 
SCUF E
Items/
Data Saved  Adjustable 
Range  Remarks
„
MATRIX 
TA B L E ABSelect the color correction table. 2 
types of tables can be stored: type A 
and type B.
SCUF E
MATRIX R-G –31 : +06 : +31
Adjust the tint. 
SCUF E
MATRIX R-B –31 : +12 : +31
Adjust the tint. 
SCUF E
MATRIX G-R –31 : +06 : +31
Adjust the tint. 
SCUF E
MATRIX G-B –31 : –01 : +31
Adjust the tint. 
SCUF E
MATRIX B-R –31 : +07 : +31
Adjust the tint. 
SCUF E
MATRIX B-G –31 : –05 : +31
Adjust the tint. 
SCUF E
„
MATRIX 
TA B L E OFF
A
B
Select the color correction table to be 
applied to the selected GAIN switch (L/
M/H). 
SCUF E
#,52%2
PINKUJDQQMMo+9
						

							
103
8
Chapter 8 Menu Description Tables (continued)
8-3-3 COLOR CORRECTION 8-3-4 LOW SETTING

The items indicated by  „ are the setting items for PAINT
MENU SW( „) R/W in the 
screen. The items without  „ are the setting items for PAINT
MENU LEVEL R/W. 
Please refer to [8-7-2 SD CARD R/W SELECT] for more
information. 
The ____ in the Adjustable Range column indicates the
preset mode. 
Items/
Data Saved  Adjustable 
Range  Remarks 
R
(SAT/PHASE)–63 : +00 : +63
Perform red color correction (saturation 
and hue). 
SCUF E
R-Mg
(SAT/PHASE) –63 : +00 : +63
Perform color correction (saturation and 
hue) between red and magenta. 
SCUF E
Mg
(SAT/PHASE) –63 : +00 : +63
Perform magenta color correction 
(saturation and hue). 
SCUF E
Mg-B
(SAT/PHASE) –63 : +00 : +63
Perform color correction (saturation and 
hue) between magenta and blue. 
SCUF E
B
(SAT/PHASE) –63 : +00 : +63
Perform blue color correction 
(saturation and hue). 
SCUF E
B-Cy
(SAT/PHASE) –63 : +00 : +63
Perform color correction (saturation and 
hue) between blue and cyan. 
SCUF E
Cy
(SAT/PHASE) –63 : +00 : +63
Perform cyan color correction 
(saturation and hue). 
SCUF E
Cy-G
(SAT/PHASE) –63 : +00 : +63
Perform color correction (saturation and 
hue) between cyan and green. 
SCUF E
G
(SAT/PHASE) –63 : +00 : +63
Perform green color correction 
(saturation, hue). 
SCUF E
G-Yl
(SAT/PHASE) –63 : +00 : +63
Perform color correction (saturation, 
hue) between green and yellow. 
SCUF E
Yl
(SAT/PHASE) –63 : +00 : +63
Perform yellow color correction 
(saturation, hue). 
SCUF E
Yl-R
(SAT/PHASE) –63 : +00 : +63
Perform color correction (saturation, 
hue) between yellow and red. 
SCUF E
„
COLOR 
CORRECT ON
OFFSelect whether or not to enable color 
correction for the selected GAIN switch 
(L/M/H).
ON:
Enable correction. 
OFF: Disable correction. 
SCUF E
Items/
Data Saved  Adjustable 
Range  Remarks 
„
MASTER 
GAIN –3dB : 0dB : 30dB
Select the master gain from –3, 0, 3, 6, 
9, 12, 15, 18, 21, 24, 27, or 30dB. 
SCUF E
H.DTL LEVEL 00 : 17 : 63
Set H.DTL LEVEL. 
SCUF E
V.DTL LEVEL 00 : 18 : 31
Set V.DTL LEVEL. 
SCUF E
DTL CORING 00 : 02 : 15
Set DTL CORING. 
SCUF E
H.DTL FREQ. 00 : 20 : 31
Set a frequency (DTL width) at which 
H.DTL is added. The greater the value, 
the higher the frequency (the narrower 
the DTL).
SCUF E
LEVEL 
DEPEND. 0
1
 : 5
Set LEVEL DEPEND. 
No DTL is added to the portion whose 
brightness is the setting value or less. 
When the GAMMA MODE SEL item is 
set to STD1, each setting value 
represents brightness levels, as follows: 
0 = about 0%, 1 = about 4%, 
2 = about 8%, 3 = about 12%, 
4 = about 16%, 5 = about 20%.
SCUF E
MASTER 
GAMMA 0.35 : 0.45 : 0.75
Set MASTER GAMMA in 0.01 steps. 
SCUF E
BLACK 
STRETCH –3 : OFF : +3
Set the gamma curb for dark spots. 
SCUF E
„
MATRIX 
TA B L E OFF
A
B
Select the color correction table. 
SCUF E
„
COLOR 
CORRECT ON
OFFSet the color correction to ON or OFF. 
SCUF E
#,52%2
PINKUJDQQMMo+9
						

							
104
Chapter 8 Menu Description Tables (continued)
8-3-5 MID SETTING 8-3-6 HIGH SETTING

The items indicated by  „ are the setting items for PAINT
MENU SW( „) R/W in the 
screen. The items without  „ are the setting items for PAINT
MENU LEVEL R/W. 
Please refer to [8-7-2 SD CARD R/W SELECT] for more
information. 
The ____ in the Adjustable Range column indicates the
preset mode. 
Items/
Data Saved  Adjustable 
Range  Remarks 
„
MASTER 
GAIN –3dB : 9dB : 30dB
Select the master gain from –3, 0, 3, 6, 
9, 12, 15, 18, 21, 24, 27, or 30dB. 
SCUF E
H.DTL LEVEL 00 : 14 : 63
Set H.DTL LEVEL. 
SCUF E
V.DTL LEVEL 00 : 15 : 31
Set V.DTL LEVEL. 
SCUF E
DTL CORING 00 : 03 : 15
Set DTL CORING. 
SCUF E
H.DTL FREQ. 00 : 20 : 31
Set a frequency (DTL width) at which 
H.DTL is added. The greater the value, 
the higher the frequency (the narrower 
the DTL).
SCUF E
LEVEL 
DEPEND. 0
1
 : 5
Set LEVEL DEPEND. 
No DTL is added to the portion whose 
brightness is the setting value or less. 
When the GAMMA MODE SEL item is 
set to STD1, each setting value 
represents brightness levels, as follows: 
0 = about 0%, 1 = about 4%, 
2 = about 8%, 3 = about 12%, 
4 = about 16%, 5 = about 20%.
SCUF E
MASTER 
GAMMA 0.35 : 0.45 : 0.75
Set MASTER GAMMA in 0.01 steps. 
SCUF E
BLACK 
STRETCH –3 : OFF : +3
Set the gamma curb for dark spots. 
SCUF E
„
MATRIX 
TA B L E OFF
A
B
Select the color correction table. 
SCUF E
„
COLOR 
CORRECT ON
OFFSet the color correction to ON or OFF. 
SCUF E
Items/
Data Saved  Adjustable 
Range  Remarks
„
MASTER 
GAIN –3dB : 18dB : 30dB
Select the master gain from –3, 0, 3, 6, 
9, 12, 15, 18, 21, 24, 27, or 30dB. 
SCUF E
H.DTL LEVEL 00 : 12 : 63
Set H.DTL. 
SCUF E
V.DTL LEVEL 00 : 14 : 31
Set V.DTL LEVEL. 
SCUF E
DTL CORING 00 : 05 : 15
Set DTL CORING. 
SCUF E
H.DTL FREQ. 00 : 20 : 31
Set a frequency (DTL width) at which 
H.DTL is added. The greater the value, 
the higher the frequency (the narrower 
the DTL).
SCUF E
LEVEL 
DEPEND. 0:3 : 5
Set LEVEL DEPEND. 
No DTL is added to the portion whose 
brightness is the setting value or less. 
When the GAMMA MODE SEL item is 
set to STD1, each setting value 
represents brightness levels, as follows: 
0 = about 0%, 1 = about 4%, 
2 = about 8%, 3 = about 12%, 
4 = about 16%, 5 = about 20%.
SCUF E
MASTER 
GAMMA 0.35 : 0.55 : 0.75
Set MASTER GAMMA in 0.01 steps. 
SCUF E
BLACK 
STRETCH –3 : OFF : +3
Set the gamma curb for dark spots. 
SCUF E
„
MATRIX 
TA B L E OFF
A
B
Select the color correction table. 
SCUF E
„
COLOR 
CORRECT ON
OFFSet the color correction to ON or OFF. 
SCUF E
#,52%2
PINKUJDQQMMo+9
						

							
105
8
Chapter 8 Menu Description Tables (continued)
8-3-7 ADDITIONAL DTL 8-3-8 SKIN TONE DTL

The items indicated by  „ are the setting items for PAINT
MENU SW( „) R/W in the 
screen. The items without  „ are the setting items for PAINT
MENU LEVEL R/W. 
Please refer to [8-7-2 SD CARD R/W SELECT] for more
information. 
The ____ in the Adjustable Range column indicates the
preset mode. 
Items/
Data Saved  Adjustable 
Range  Remarks 
KNEE APE LVL OFF
1
2
 : 5
Set KNEE APE LEVEL. 
SCUF E
CHROMA DTL OFF1 : 5
Set the chroma detail. 
Detects the chroma edge and 
superimposes it on Y to enhance 
H.DTL. A greater value increases the 
correction. 
SCUF E
DTL GAIN(+) –31 : +00 : +31
Adjust the detail level toward + 
(upwards). 
SCUF E
DTL GAIN(–) –31 : +00 : +31
Adjust the detail level toward the – 
(downwards). 
SCUF E
DTL CLIP 00 : 63
Adjust the detail signal clip towards the 
+ direction. 
SCUF E
DTL SOURCE (R+G)/2(G+B)/2
2G+R+B /4
(3G+R)/4
R
GSet the signal source for detail signal 
components. 
SCUF E
H.DTL LINE MIX 0H 1H
2H
Set the scan line to generate the H.DTL 
signal. 
SCUF E
„
CORNER DTL ONOFFON/OFF switching for CORNER DTL 
mode, which enhances the resolution 
around the screen perimeter. 
SCUF E
Items/
Data Saved  Adjustable 
Range  Remarks 
„
SKIN TONE 
DTL ON
OFFSet the skin tone DTL to ON or OFF. 
SCUF E
„
SKIN TONE 
ZEBRA ON
OFFON/OFF switching for ZEBRA within 
the SKIN TONE range. 
SCUF E
SKIN DTL 
CORING 0 : 5 : 7
Adjust the effect of SKIN TONE DTL 
CORING. 
SCUF E
SKIN TONE 
GETUsed when obtaining the target hue for 
SKIN TONE DTL. Align the center 
marker and the target object with each 
other.
–––––
Y MAX 000 : 190 : 255
Set the maximum value of the 
brightness signal to which SKIN TONE 
effect is enabled. 
SCUF E
Y MIN 000 : 010 : 255
Set the minimum value of the 
brightness signal to which the SKIN 
TONE effect is enabled. 
SCUF E
I CENTER 000 : 022 : 255
Set the center position on the I axis (the 
area where SKIN TONE is enabled). 
SCUF E
I WIDTH 000 : 010 : 255
Set the area width where SKIN TONE 
is enabled along the I axis above and 
below the I CENTER. 
SCUF E
Q WIDTH 000 : 005 : 255
Set the area width where SKIN TONE 
is enabled along the Q axis above and 
below the I CENTER. 
SCUF E
Q PHASE –128 : +000 : +127
Set the phase in the area where SKIN 
TONE is enabled based on the Q axis. 
SCUF E
R-Y
B-Y
Q-WIDTHI-WIDTHQ-PHASE
I-CENTER
Y
Y-MAX
Y-MIN 0
– direction + direction
 = SKIN TONE AREA
#,52%2
PINKUJDQQMMo+9
						

							
106
Chapter 8 Menu Description Tables (continued)
8-3-9 KNEE/LEVEL

The items indicated by  „ are the setting items for PAINT
MENU SW( „) R/W in the 
screen. The items without  „ are the setting items for PAINT
MENU LEVEL R/W. 
Please refer to [8-7-2 SD CARD R/W SELECT] for more
information. 
8-3-10 GAMMA
8-3-11 FLARE
The ____ in the Adjustable Range column indicates the
preset mode. 
Items/
Data Saved  Adjustable 
Range  Remarks 
MASTER PED –200 : +005 : +200
Set the master pedestal. 
SCUF E
„
MANUAL 
KNEE ONOFFSet the mode when the AUTO KNEE 
switch is OFF. The KNEE POINT/
SLOPE set value is enabled when this 
setting is ON. 
SCUF E
KNEE POINT 70.0% : 85.0% : 107.0%
Set the KNEE POINT position in 0.5% 
steps. 
SCUF E
KNEE SLOPE 00 : 50 : 99 (98)
Set the KNEE SLOPE. 
0 setting is equal to KNEE OFF. 

The adjustable range when using the 
AJ-EC3P is from 00 to 98. 
SCUF E
„
WHITE CLIP ONOFFSet the WHITE CLIP feature to ON or 
OFF. The WHITE CLIP LVL set value is 
enabled when this setting is ON. 
SCUF E
WHITE CLIP 
LV L 90% : 105% : 109%
Set WHITE CLIP LEVEL. 
SCUF E
A.KNEE POINT 80% : 85% : 107%
Set the AUTO KNEE POINT position in 
0.5% steps. This setting is enabled 
when the OUTPUT/AUTO KNEE 
selector switch is set to CAM.AUTO 
KNEE ON. 
SCUF E
A.KNEE LVL 100 : 105 : 109
Set the AUTO KNEE LEVEL. 
SCUF E
A.KNEE 
RESPONSE 1 : 4
Set the AUTO KNEE response speed. 
The smaller the setting value, the faster 
the response speed.
SCUF E
Items/
Data Saved  Adjustable 
Range  Remarks
MASTER 
GAMMA0.35 : 0.45 : 0.75
Set the master gamma in 0.01% steps. 
SCUF E
R GAMMA –15 : +00 : +15
Set the Rch gamma. 
SCUF E
B GAMMA –15 : +00 : +15
Set the Bch gamma. 
SCUF E
GAMMA MODE 
SEL STD1STD2
NEWSSelect the gamma. 
STD1:
Standard gamma feature.
STD2: Gamma feature that conforms to 
the ITU-R.BT709 standards.
NEWS:This video gamma feature can 
effectively reproduce gradations 
by reducing whiteouts and 
blackouts when shooting an 
object with partially highlighted 
areas. This gamma is especially 
effective in the AUTO KNEE 
mode.

Selecting NEWS gamma disables 
settings under the items KNEE SLOPE, 
KNEE POINT, and A.KNEE POINT 
outlined in [8-3-9 KNEE/LEVEL]. These 
settings are also disabled when NEWS 
gamma is selected with the USER 
switch. 
SCUF E
Items/
Data Saved  Adjustable 
Range  Remarks
R FLARE 000 : 100
Set the R FLARE. 
SCUF E
G FLARE 000 : 100
Set the G FLARE. 
SCUF E
B FLARE 000 : 100
Set the B FLARE. 
SCUF E
#,52%2
PINKUJDQQMMo+9
						

							
107
8
Chapter 8 Menu Description Tables (continued)
8-3-12 „CAMERA SETTING
ZEBRA Pattern Display

All items in CAMERA SETTING are setting targets of the
item PAINT MENU SW( „) R/W in the  screen. 
8-4 VF
8-4-1 VF DISPLAY
The ____ in the Adjustable Range column indicates the
preset mode. 
Items/
Data Saved  Adjustable 
Range  Remarks 
DETAIL ONOFFSet the DTL (H, V) to ON or OFF. 
SCUF E
2D LPF ON OFFON/OFF switching for the two-
dimensional LPF that reduces cross-
color. 
SCUF E
HIGH COLOR ON
OFFON/OFF switching for the HIGH 
COLOR mode, which enhances the 
color dynamic range. 
SCUF E
GAMMA ONOFFSet the gamma circuit to ON or OFF. 
SCUF E
TEST SAW ON OFFSwitch the test signal ON or OFF. 
SCUF E
FLARE ONOFFSet the flare correction to ON or OFF. 
SCUF E
H-F COMPE. ONOFFON/OFF switching for the H-F COMPE 
mode, which enhances the DTL in the 
high-frequency range. 
SCUF E
SPOT
OFF
ON
109%
0%
ZEBRA 2
DETECT ZEBRA 2
ZEBRA 1
DETECTVideo Level Items/
Data Saved  Adjustable 
Range  Remarks 
DISP 
CONDITIONNORMALHOLDNORMAL:
Display status constantly. 
HOLD: Display status only when the 
MODE CHECK switch is 
pressed. 
–CUFE
DISP MODE 1
2
3Set the DISP MODE. 
Switch the camera’s Warning/Message 
indication. Please refer to [4-7-4 
Display Modes and Setting Changes/
adjustment Result Messages] for more 
information. 
–CUFE
VF OUT YNAM
R
G
BSelect the VF output. 
Y: Brightness signal
NAM: Output signal with the highest 
level among R, G, and B 
signals. 
R: Rch signal
G: Gch signal
B: Bch signal
–CUFE
VF DTL 0 : 3 : 5
Select the VF DTL. 
Additionally enhance the DTL for the 
VF signal. 0 setting is the same DTL as 
the primary scan lines. 
–CUFE
ZEBRA1 
DETECT 0% : 70% : 109%
Set the ZEBRA1 detection level (IRE 
value). 
–CUFE
ZEBRA2 
DETECT 0% : 85% : 109%
Set the ZEBRA2 detection level (IRE 
value). 
–CUFE
ZEBRA2 OFF SPOT
ON
Set the ZEBRA2 to ON, OFF, or SPOT. 
–CUFE
LOW LIGHT LVL OFF 10%
15%
20%
25%
30%
35%Set the camera incoming light volume 
at which to display LOW LIGNT. 
–CUFE
ECU MENU 
DISP. ON
OFFSet the menu display on the VF to ON 
or OFF when the ECU is connected. 
–CUFE
50M 
INDICATOR ON
OFFSet the 50M recording indication to ON 
or OFF. 
–CUFE
MARKER/CHAR 
LV L 50%60%
70%
80%
90%
100%Adjust the brightness of markers and 
characters displayed on the VF. 
–CUFE
#,52%2
PINKUJDQQMMo+9
						

							
108
Chapter 8 Menu Description Tables (continued)
8-4-2 VF MARKER
8-4-3 USER BOX 8-4-4 VF INDICATOR1
The ____ in the Adjustable Range column indicates the
preset mode. 
Items/
Data Saved  Adjustable 
Range  Remarks 
TA B L E ABSelect the VF MARKER setting table. 
First, select table A or B, then set the 
items below for each table. 
–CUFE
CENTER MARK OFF
1
2
3
4
Switch the center mark. 
OFF:Do not display center mark. 
1: + (large)
2: Hollow (large)
3: + (small)
4: Hollow (small)
–CUFE
SAFETY ZONE OFF
1
2
Select the frame type for the safety 
zone. 
OFF:Do not display frame. 
1: Box
2: Corner frame
–CUFE
SAFETY AREA 80% : 90% : 100%
Set the position of the safety zone. 
–CUFE
FRAME SIG 4:313:9
14:9
VISTASet the frame marker. 
Only enabled when REC MODE is set 
to 16:9. 
The VISTA ratio is 16:8.65. 
–CUFE
FRAME MARK ON
OFFSet the frame marker to ON or OFF. 
–CUFE
FRAME LVL 0 : 15
Set the level outside the frame marker. 
0: Equivalent to signal OFF. 
15: Same brightness as center area. 
This setting, however, is disabled if 
the FRAME SIG is set to VISTA. 
–CUFE
Items/
Data Saved  Adjustable 
Range  Remarks 
USER BOX ON
OFFSelect whether or not to display the 
USER BOX. 
–CUFE
USER BOX 
WIDTH1 : 13 : 100
Set the width of the USER BOX. 
–CUFE
USER BOX 
HEIGHT 1 : 13 : 121
Set the height of the USER BOX. 
–CUFE
USER BOX H 
POS –50 : +00 : +50
Set the horizontal position of the USER 
BOX. 
–CUFE
USER BOX V 
POS –121 : +000 : +121
Set the vertical position of the USER 
BOX. 
–CUFE
Items/
Data Saved  Adjustable 
Range  Remarks
EXTENDER ONOFFSet the extender indication to ON or 
OFF. 
–CUFE
SHUTTER ONOFFSet the shutter speed indication to ON 
or OFF. 
–CUFE
FILTER ONOFFSet the filter No. indication to ON or 
OFF. 
–CUFE
WHITE ONOFFSet the AWB PRE/A/B indication to ON 
or OFF. 
–CUFE
GAIN ONOFFSet to ON or OFF the indications for 
current gain setting, S.GAIN. 
–CUFE
IRIS OFF IRIS
S+IRIS
S
OFF:Disable indications of both the 
super iris ON status and the iris 
value. 
IRIS: Enable only the iris value 
indication. 
S+IRIS:Enables indications of the super 
iris ON status and the iris value. 
S: Enable indication of the super 
iris ON status. 
(The iris value indication and the iris 
override indication/non indication are 
interlocked.)
–CUFE
CAMERA ID OFF
BAR
CAM
ALWAYS
Select when to enable the ID mix during 
recording. 
OFF:Disable ID mix. 
BAR: Enable when recording color 
bars. 
CAM: Enable when recording 
camera image. 
ALWAYS:Enable always. 

ID MIX INH of the “8-9-1 OPTION” is 
set to OFF to mix an ID to the camera 
image. 
ID is not superimposed in the EE mode, 
but recorded onto the P2 card.
–CUFE
ID POSITION UPPER R
UPPER L
LOWER R
LOWER L
Set the camera ID recording position. UPPER R:Upper right. UPPER L: Upper left. LOWER R:Lower right. LOWER L: Lower left. 
–CUFE
DATE/TIME ON
OFFSelect whether or not to simultaneously 
mix the year/month/date and hour/
minute/second when recording the 
camera ID. 
–CUFE
ZOOM LVL ONOFFSet the zoom position indication to ON 
or OFF. 
–CUFE
COLOR TEMP ONOFFSet the color temperature indication to 
ON or OFF. 
–CUFE
#,52%2
PINKUJDQQMMo+9
						

							
109
8
Chapter 8 Menu Description Tables (continued)
8-4-5 VF INDICATOR2
8-4-6 MODE CHECK IND
The ____ in the Adjustable Range column indicates the
preset mode. 
Items/
Data Saved  Adjustable 
Range  Remarks 
P2CARD 
REMAINOFF
ONE-CARD
TOTALSelect the indication mode for the P2 
card’s remaining capacity. 
OFF:
Disable the remaining capacity 
indication. 
ONE-CARD: Display the remaining capacity 
of the P2 card currently used for 
recording. 
TOTA L:Display the total remaining 
capacity of all P2 cards in slots. 
–CUFE
BATTERY ONOFFSet the battery voltage indication to ON 
or OFF. 
–CUFE
AU DIO LV L ONOFFSet the audio lever meter indication to 
ON or OFF. 
–CUFE
TC OFFTCG
TCR
TCG/TCRSelect the time code to display. 
OFF: Disable the time code display. 
TCG: Display the time code generator 
value in E-E mode. 
TCR: Display the time code reader 
value in V-V mode. 
TCG/TCR: Display the time code generator 
value in E-E mode, and the time 
code reader value in V-V mode. 
–CUFE
SYSTEM INFO OFF
ALWAYS
NORMALSelect the method of displaying system 
information and warnings.
OFF:Display no warnings other than 
“TURN POWER OFF” and 
“SYSTEM ERROR”.
ALWAYS: Always display warnings.
NORMAL: Display warnings for 3 seconds only 
when problems occur. 
–CUFE
SAVE LED P2CARD
SAVESet the SAVE lamp function. 
P2CARD:The lamp blinks in synch with 
the warning message when the 
P2 card’s remaining recording 
capacity is getting low. 
SAVE: The lamp lights up when the 
SAVE ON/OFF switch is set to 
ON and the output system 
assigned in [8-2-2 OPTION 
MODE] is in the save mode.
–CUFE
DV O NOFFDV Select whether or not to enable DV 
indication when the format is set to DV. 
ON:
Enable DV indication. 
OFF: Disable DV indication. 
–CUFE
VOICEMEMO ONOFFSelect whether or not to enable the   
indication during voice memo 
recording. 
ON: Enable  indication. 
OFF: Disable  indication. 
–CUFEV
VV
Items/
Data Saved  Adjustable 
Range  Remarks 
REC STATUS ON
OFFSelect whether or not to enable “REC” 
indication in the viewfinder and on the 
LCD monitor during recording.
ON:REC indication enabled.
OFF: REC indication not enabled.

This option is useful when the AJ-
SPC700P is used independently. When 
the 1394 control option is set to BOTH 
with an external IEEE 1394 device, 
settings are subject to setting of the 
menu option REC TALLY in SYSTEM 
MODE.
–CUF –
PROXY REC ON
OFFWhen a video encoder card (AJ-
YAX800G, optional) is attached, proxy 
recording information is displayed when 
recording starts.
ON:Display indicating whether proxy 
recording is to be performed on 
the P2 card only, or on both the 
P2 card and the SD memory card.
OFF: Proxy recording information is not 
displayed.
–CUF –
Items/
Data Saved  Adjustable 
Range  Remarks 
STATUS ONOFFSelect whether or not to display the 
status indication during MODE CHECK. 
–CUFE
!LED ONOFFSelect whether or not to display the 
cause indication screen when the ! LED 
turns on during MODE CHECK 
–CUFE
FUNCTION ONOFFSelect whether or not to display the 
FUNCTION indication screen during 
MODE CHECK. 
–CUFE
AU DIO ONOFFSelect whether or not to display the 
AUDIO indication screen during MODE 
CHECK. 
–CUFE
P.ON IND ONOFFSelect whether or not to display the 
status indication screen after the power 
is turned ON. 
–CUFE
#,52%2
PINKUJDQQMMo+9
						

							
110
Chapter 8 Menu Description Tables (continued)
8-4-7 !LED

If both GAIN (0 dB) and GAIN (–3 dB) are set to ON, the
LED illuminates except when GAIN is adjusted to 0 dB and 
–3 dB. 
8-5 CAM OPERATION
8-5-1 CAMERA ID

This setting is canceled when READ FACTORY DATA is
selected. 
8-5-2 SHUTTER SPEED
The ____ in the Adjustable Range column indicates the
preset mode. 
Items/
Data Saved  Adjustable 
Range  Remarks 
GAIN(0dB) ONOFFSelect whether or not to illuminate 
when GAIN is set to other than 0 dB.
–CUFE
GAIN (-3dB) ON OFFSelect whether or not to illuminate 
when GAIN is set to other than –3 dB.
–CUFE
SHUTTER ONOFFSelect whether or not to illuminate 
when the shutter is set to ON. 
–CUFE
WHITE 
PRESET ON
OFFSelect whether or not to illuminate 
when the WHITE BAL switch is set to 
PRST. 
–CUFE
EXTENDER ONOFFSelect whether or not to illuminate 
when the lens is in EXTENDER mode. 
–CUFE
BLACK STR ON OFFSelect whether or not to illuminate 
when BLACK STRETCH is used. 
–CUFE
MATRIX ON OFFSelect whether or not to illuminate 
when MATRIX is set to ON. 
–CUFE
COLOR 
CORRECTION ON
OFFSelect whether or not to illuminate 
when COLOR CORRECTION is set to 
ON. 
–CUFE
FILTER ON
OFFSelect whether or not to illuminate the 
lamp when filter1 (3200K) is not 3200K.
–CUFE
SUPER V ON OFFSelect whether or not to illuminate 
when SUPER V is set to ON. 
–CUFE
50M/25M/DV OFFW/O 50M
W/O 25M
W/O DVSelect whether or not to illuminate 
according to the recording mode. 
OFF: Does not illuminate in any 
recording mode. 
W/O 50M: Illuminate except in DVCPRO50 
mode. 
W/O 25M: llluminate except in DVCPRO 
mode. 
W/O DV: Illuminate except in DV mode. 
–CUFE
AT W
ON
OFFSelect whether or not to illuminate 
when auto-tracking white balance is 
allocated to the WHITE BAL switch B. 
–CUFE
Items/
Data Saved  Adjustable 
Range  Remarks
ID1Setting 1 for the CAMERA ID recorded 
on color bars. Up to 10 characters are 
allowed for this setting.
–CUF –
ID2Setting 2 for the CAMERA ID recorded 
on color bars. Up to 10 characters are 
allowed for this setting.
–CUF –
ID3Setting 3 for the CAMERA ID recorded 
on color bars. Up to 10 characters are 
allowed for this setting.
–CUF –
Items/
Data Saved  Adjustable 
Range  Remarks
SYNCHRO 
SCANONOFFAllocate SYNCHRO SCAN as a shutter 
speed selectable by the shutter switch. 
–CUFE
SUPER V ON OFFAllocate SUPER V as a shutter speed 
selectable by the shutter switch. 
–CUFE
POSITION1 ONOFFAllocate the shutter speed set by 
POSITION1 SELECT in the 
 screen as the 
shutter speed selectable by the shutter 
switch. 
–CUFE
POSITION2 ONOFFAllocate the shutter speed set by 
POSITION2 SELECT in the 
 screen as the 
shutter speed selectable by the shutter 
switch. 
–CUFE
POSITION3 ONOFFAllocate the shutter speed set by 
POSITION3 SELECT in the 
 screen as the 
shutter speed selectable by the shutter 
switch. 
–CUFE
POSITION4 ONOFFAllocate the shutter speed set by 
POSITION4 SELECT in the 
 screen as the 
shutter speed selectable by the shutter 
switch. 
–CUFE
POSITION5 ONOFFAllocate the shutter speed set by 
POSITION5 SELECT in the 
 screen as the 
shutter speed selectable by the shutter 
switch. 
–CUFE
POSITION6 ONOFFAllocate the shutter speed set by 
POSITION6 SELECT in the 
 screen as the 
shutter speed selectable by the shutter 
switch. 
–CUFE
#,52%2
PINKUJDQQMMo+9