Panasonic Aj Spc700p Operating Instructions Manual

81
6
Chapter 6 Manuipulating Clips with Thumbnails (continued)
6-7 Voice Memo
A voice memo is audio data that can be attached to the clip
separately from the voice recorded during shooting. 

A voice memo can be attached during recording. Please
refer to [3-8 Voice Memo Function] for more information. 
6-7-1 Playing Back Voice Memos
1Press the THUMBNAIL button. 
The thumbnail screen appears on the LCD monitor. 
2Press the MENU BAR button. The pointer moves to the
menu bar. 
3From the MENU BAR, select...

82
Chapter 6 Manuipulating Clips with Thumbnails (continued)
6-7-3 Deleting Voice Memos
1Perform Steps 1 to 4 in the [6-7-1 Playing Back Voice
Memos] section to select the voice memo in the clip. 
2Move the pointer over the clip you want to delete, and
press the MENU BAR button. The pointer moves to the
menu bar. 
3From the menu bar, select OPERATION   DELETE. 
YES and NO appear to confirm deletion. Use the cursor
buttons and the SET button to select YES. 
The voice memo is deleted. 
6-8 Deleting...

83
6
Chapter 6 Manuipulating Clips with Thumbnails (continued)
6-11 Copying Clips
Selected clips can be copied to the P2 card or SD memory
card in the desired slot.
1Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.
2Use the cursor buttons to move the pointer to the
desired clip and press the SET button.
3Press the MENU BAR button and select OPERATION
 COPY from the menu bar.
Select Slot 1-5 or SD memory card as the destination.
4The confirmation window appears. Use the...

84
Chapter 6 Manuipulating Clips with Thumbnails (continued)
5Names of metadata upload files stored on the SD
memory card are displayed. Select the desired files
using the cursor buttons, and choose YES. Upload
starts.
Uploaded metadata is retained even if the power is
turned off. For [more information on] confirmation of
uploaded data, see [6-17-4 Confirmation of Metadata
Upload].
Clip Meta Data items
Clip Meta Data includes the following items: Underlined
items can be set by reading the metadata...

85
6
Chapter 6 Manuipulating Clips with Thumbnails (continued)
Selecting the USER CLIP NAME recording method
Select META DATA  USER CLIP NAME from the menu
bar to select the recording method. Two options are
available: TYPE1 and TYPE2.
* The COUNT value is indicated as a four-digit number. The COUNT value is incremented each time a new clip is
captured if clip metadata has been read in and TYPE2 has
been selected as the recording method.
The COUNT value can be reset using the following
procedure....

86
Chapter 6 Manuipulating Clips with Thumbnails (continued)
6-14 Formatting a P2 Card 
1Press the THUMBNAIL button. 
The thumbnail screen appears on the LCD monitor. 
2Press the MENU BAR button. The pointer moves to the
menu bar. 
3From the menu bar, select OPERATION  FORMAT. 
The following screen appears. Select the slot number
for the P2 card you want to format. 
Select EXIT if formatting is not required. 
4The following screen appears. Use the cursor buttons
and the SET button to select YES. 
5The...

87
6
Chapter 6 Manuipulating Clips with Thumbnails (continued)
6-16 Setting the Thumbnail Display Mode
The thumbnail display mode can be customised to suit your
preferences. 
1Press the THUMBNAIL button. 
The thumbnail screen appears on the LCD monitor. 
2Press the MENU BAR button. The pointer moves to the
menu bar. 
3From the menu bar, select THUMBNAIL  SETUP. 
The following screen appears. 
MARKER IND. :
Switches the shot mark marker between indication and no
indication (ON/OFF). The factory setting...

88
Chapter 6 Manuipulating Clips with Thumbnails (continued)
6-17 Properties
The clip’s properties and the P2 card’s status are displayed.
6-17-1 Clip Property
From the menu bar, select PROPERTY  CLIP
PROPERTY. 
The following screen appears. 
Clip Number
Thumbnail
Slip Information 
Displays the number of markers and voice memos
attached to the clip. 
The   mark appears if the clip is recorded on a write-
protected P2 card. 
Slot Number
Clip Information 
Displays detailed information about the clip....

89
6
Chapter 6 Manuipulating Clips with Thumbnails (continued)
Contents of P2 Card Status Display Settings
From the menu bar, select PROPERTY  CARD STATUS.
The following screen appears. 
When “REMAIN” is selected:
Write-protect Mark
The   mark appears if the P2 card is write-protected. 
P2 Card Status (remaining free space)
The remaining memory capacity of the P2 card is
indicated by a bar graph and percentage. The bar graph
indicator moves to the left as the remaining free space
decreases.
The...

90
Chapter 6 Manuipulating Clips with Thumbnails (continued)
6-17-3 SD memory card Status Display
The status display enables a confirmation of the SD memory
card formatted condition, available memory capacity etc.
From the menu bar, select PROPERTY   DEVICES   SD
CARD.
If the format is compatible with SD standards, the message
“SD STANDARD: SUPPORTED” is displayed.
If the format is not compatible with SD standards, the
message “SD STANDARD: NOT SUPPORTED” is
displayed. If this is the case, writing or...