Panasonic Aj Spc700p Operating Instructions Manual

41
4
Chapter 4 Adjustments and Settings for Recording (continued)
4-5-5 Providing an ID to the Camera
The camera ID is specified through the 
screen.
The ID can include up to 10 alphanumeric characters,
symbols, and/or spaces. 

When the settings menu is displayed, outputting color bar
signals does not indicate the camera ID. 
1Go to the  screen from the CAM
OPERATION page.
2Turn the JOG dial button to move the cursor to options
[ID1:] - [ID3:].
3Press the JOG dial button. The cursor moves to the ID...

42
Chapter 4 Adjustments and Settings for Recording (continued)
4-5-7 CTL Count Setting and Display
By setting the DISPLAY switch to “CTL”, CTL count is
displayed on the time count indication of the LCD display
window.
The CTL count is displayed in ±12 hours with non-drop-
frame.
The playback order of clips recorded on a P2 card is not
linear as for VTRs. It is organized according to thumbnail
operations or  exchanging  P2 cards, and the priority of
recorded clips will be altered. Therefore, different...

43
4
Chapter 4 Adjustments and Settings for Recording (continued)
4-6 Menu Displays in the Viewfinder Screen
4-6-1 Menu Configuration
USER MENU:USER MENU is factory-set. The menu can be
configured to suit your preferences by
specifying each option according to your
purposes and frequency of use, through the
 screen, which is
accessible from the MAIN MENU page. 
For more information, see [4-6-3 Selecting
Options for USER MENU].
To display USER MENU, press the MENU
button.
MAIN MENU:Allows you to set all...

44
Chapter 4 Adjustments and Settings for Recording (continued)
2Turn the JOG dial button to move the mark () to a
desired menu option. Then, press the JOG dial button
to display the sub-menu screen.
3Turn the JOG dial button to move the mark ( ) to a
desired menu option. Then, press the JOG dial button
to display the options screen.
4Turn the JOG dial button to move the mark ( ) to a
desired option. Then, press the JOG dial button. The
value starts blinking. 
5Turn the JOG dial button to change the...

45
4
Chapter 4 Adjustments and Settings for Recording (continued)
4-7 Viewfinder Screen Status Displays
In addition to video images, the viewfinder displays lamps
and text that indicate the settings and operating status of the
AJ-SPC700P, together with messages, a center marker, a
safety zone marker and the camera ID.
4-7-1 Lamps in the Viewfinder Screen 
TALLY/REC (recording) Lamp
This lamp stays illuminated during recording, and starts
blinking if any abnormal action occurs.
For more information, see...

46
Chapter 4 Adjustments and Settings for Recording (continued)
Information Item Indication Status
Extender
EX2 Lens extender used.
MODE CHECK 
Indication Area
(STATUS:
 Master gain, 
 USER SW GAIN) LOW/MID/HIGH
–3 to 30
S.GAIN 30/36 Value set for the master gain
Example: LOW: 0
Gain value to which S.GAIN is assigned
(Cause of !LED 
illumination: displayed 
full-screen)
z Indications selected 
through the menu option 
!LED are marked with [ ! ].
z Indications which may 
activate the !LED are 
marked...

47
4
Chapter 4 Adjustments and Settings for Recording (continued)
Information Item Indication Status
Camera Warning and 
Report Area 
(related to AWB, ABB 
and switch settings) AWB A ACTIVE
AWB B ACTIVE
AWB A OK 
_._ K
AWB B OK  _._ K
AWB BREAK  _._ K
AW B  N G COLOR TEMP LOW
COLOR TEMP HIGH
LEVEL OVER
LOW LIGHT
TIME OVER
AWB PRESET   _._ K
AT W  M O D E
CHECK FILTER
AWB A VAR _._ K
AWB B VAR  _._ K
ABB ACTIVE
ABB OK
ABB BREAK
ABB NG
W-SHD ACTIVE
W-SHD OK
W-SHD BREAK
W-SHD NG LV L  O V E R
B-SHD READY...

48
Chapter 4 Adjustments and Settings for Recording (continued)
Information Item Indication Status
Gain value
__ dB Current gain value.
System information 
and warningsSYSTEM ERROR- __
TURN POWER OFF
CARD ERR  _
REC WARNING
BACKUP BATT EMPTY
WIRELESS-RF
EOM
BOS
EOS
CANNOT REC
CANNOT PLAY
COMM ERROR
VOICE CANNOT REC
VOICE R EC
VOICE OFF
VOICE PLAY
MARK ON/OFF
UPDATING
USB DRIVE
THUMBNAIL OPEN
1394 INITIAL ERROR
PROXY REC P2&SD
PROXY REC P2
NEAR END (SD)
EOM (SD)
PROXY CARD ERROR
SD CARD WRITE ERR...

49
4
Chapter 4 Adjustments and Settings for Recording (continued)
Information Item Indication Status
PRE RECORDING 
indication/
SD memory card 
remaining free space 
(when MODE CHECK 
is being performed)
P-REC (blink)
__ h__ m Indicated while pre-recorded video and audio are being recorded on the P2 
card. If the USER switch is set to perform the PRE REC function, either “P-
REC OFF” or the specified duration “1s - 8/15s” is displayed when the PRE 
RECORDING mode is switched by pressing the USER switch....

50
Chapter 4 Adjustments and Settings for Recording (continued)
*The menu option P2CARD REMAIN can be found in the  screen, which is accessible from the VF page.
*1n: Not provided when the menu option STATUS is set to OFF, which can be found in the  screen, accessible from the 
VF page.
z : Provided regardless of the menu option setting.
P2 Card Remaining Free Space/capacity Indication
Status of 
AJ-SPC700P Recording status
Menu option
P2 CARD REMAIN*  P2 card remaining free space 
indication P2 card...