Panasonic Aj Hd1700 Operating Instructions Manual

71
Function menus
Function
button/item Switching
method Corresponding setup
menu item
F1
FORMATFi
Press___Description of setting
For formatting the IC card.Setting
___
F2
SAVEPress
___For transferring data from the IC card files.
___
F1 (SHIFT)
F2 (SHIFT)
F3 (SHIFT)
F4 (SHIFT)
F5 (SHIFT)
F6 (SHIFT)
______ ___ ______

Editing the title of a selected file
First select the operation file, and then press the
ADJ dial.
The first digit of the title display area is highlighted,
indicating that the file title...

72
Function menus
F1SHIFTF2F3F4F5F6
Registered item name
Registered value Selection marker

Pins in which functions can be registered
IN pins:  Pins 6 to 20, 22, 23, 25
OUT pins: Pin 21, 24, pins 32 to 46, 48
All other pins are reserved and cannot be changed. Using the front panel controls and on-screen menus,
functions are registered into the input pins of the
parallel remote (50PIN) connector and the statuses
are registered into its output pins.
When  (50P IN) or  (50P OT) is pressed while
the  button...

73
Function menus

Press  (RESET) while holding down the  button.
All the registered item names and registered values
are now set to the factory settings.  (These settings
cannot be restored.)FF4
Registering functions in the input pins/Active inputs
Registering functions in the output pins/Active outputs
ClearingResetting all the items and values
1.
Selecting the 50-pin connector pins
Turn the ADJ dial to move the selection marker and
select the pin of the 50-pin connector into which the
menu item is to...

74
Function menus
Special IN menu list (continued)
Special OUT menu list
No.
SUPER
DISPLAYDescription of setting
B22
UD FIT_V
For switching the picture angle during down-conversion to
letter box and the picture angle during up-conversion to the
top/bottom cut status in the vertical direction.
B23
UD FIT_HFor switching the picture angle during down-
conversion to the side cut mode and the picture angle
during up-conversion to the side panel mode.
B24
UD FIT_HVFor switching the picture angle during down-...

75
C22
ERR0C23
ERR1C24
ERR2Error status
000
SERVO NOT LOCKED (priority level 1)
001
SERVO LOCKED (priority level 4)
010
HIGH ERROR (amber) (priority level 3)
011
HIGH ERROR (red) (priority level 2)
Error statuses
C12
TC SRC1C13
TC SRC2TC input status
00
External SLTC
01
External LTC
10
External SVITC (or external VITC with SD input)
11
INT
TC input statuses
C10
CAS INH1
C11
CAS INH2Tape recording inhibit status
00
Cassette recording enabled
01
Cassette accidental erasure prevented
Tape recording inhibit...

76
Function menus

50P IN/OUT ASSIGN function buttons
Function
button/item Switching
method Corresponding setup
menu item
F1
:
PREVPress
___Description of setting
For scrolling the on-screen menu pages in the forward
direction.Setting
___
F2
;
NEXTPress
___For scrolling the on-screen menu pages in the reverse
direction. ___
F4
RESETPress
Fi
Press___For resetting one pin: what has been selected for the pin
selected by the individual reset selection marker is cleared.
For resetting all the pins: what has...

77
Function menus

50-pin assignment factory settings
Pin
no.I/O
Setting item 
1I
REC
2I
PLAY
3I
FF
4I
REW
5I
STOP
6I
___
7I
___
8I
422 REMOTE ON
9I
422 REMOTE OFF
10 I
LOCAL ENABLE
11 I
EJECT
12 I
IN SET
13 I
REC INH ALL
14 I
REC INH PRE
15 I
LOCAL DISABLE
16 I
TC EXT
17 I
TC INT&TCG MODE AUTO
18 I
___
19 I
___
20 I
STNDBY ON/OFF
21 O
ERR0 STATUS
22 I
DET STOP ON
23 I
CUE
24 O
ERR1 STATUS
25 I
DET STOP OFF
26 Power
27 O
REC STATUS
28 O
PLAY STATUS
29 O
FF STATUS
30 O
REW STATUS
31 O
STOP STATUS
32 O
422...

LOCAL HDHD
AJ-HD1700 External encoder remote
controller
SD
BOTH SD
BOTH
BOTH HD
External encoder remote
controller/AJ-HD1700 SD
BOTH
Setting Adjustment item
05:
ENCODER
SEL06:
V LEVEL
CTRL662: V LEVEL
663: C LEVEL
664: HUE ( or C PHASE)
665: SETUP LVL (or BK LVL)
REMOTE
78
System menus
No./Item Description of setting
The underlining (__) denotes the factory setting mode.
00
WFM SELThis enables one of a number of different signals
to be output from the VIDEO OUT 2 output
connector.
0000 CTL:The CTL signal...

00
COARSEFor adjusting the VIDEO OUT system phase in 1H
steps.
j
: To advance the phase.   i
: To delay the phase.
0000j
5H
::
0005
0H::
0010 5H
 
This setting remains unchanged
even when the factory setting
operation is performed.
No./Item Description of setting
12
SYS H 
(HD)*
UP
For adjusting the system phase of the HD SDI output. 
When the  button is pressed, the display transfers to
the submenu screen; press the  button again to
return the display from the submenu screen.
SHIFTSHIFT
00
COARSEFor...

59/60 Hz mode:Status in which “0” (59/60) has been
selected
50 Hz mode: Status in which “1” (50) has been
selected
23/24 Hz mode:Status in which “2” (23/24) has been
selected
25 Hz (HD) mode:Status in which “3” (25 (HD)) has been
selected
25 Hz (SD) mode:Status in which “4” (25(SD)) has been
selected
80
System menus
*System switching
• Some of the system menu and setup menu items each have
different settings for different operation modes (59/60 Hz, 50
Hz, 23/24 Hz and 25 Hz (HD or SD)).  These settings...