Panasonic Aj Hd1700 Operating Instructions Manual
Here you can view all the pages of manual Panasonic Aj Hd1700 Operating Instructions Manual. The Panasonic manuals for Cassette Player are available online for free. You can easily download all the documents as PDF.
Page 81
81 Setup menus The underlining (__) denotes the factory setting mode. No./Item Description of setting 000 P-ROLL TIMEFor setting the preroll time. Any time from 0 to 30 seconds can be set in 1- second increments. 0000 0s :: 0005 5s:: 0030 30s •During automatic editing (PREVIEW or AUTO EDIT), no operations are performed if the preroll time is set to 0 seconds. •If the phases are to be synchronized between two decks for editing as per the setup menu item No.004 (SYNCHRONIZE) setting, set the preroll time...
Page 82
82 Setup menus The underlining (__) denotes the factory setting mode. (continued) No./Item Description of settingNo./Item Description of setting 008 CHARA V-POSFor setting the vertical positions of the characters for the time code and other superimposed displays of the HD SDI MONITOR, SD SDI MONITOR and VIDEO OUT3 connectors. 0000 0 :: 0023 23:: 0032 32 When this menu item has been set, the displays are output to the VIDEO OUT3 connector in the DISPLAY SEL status even when the SUPER OFF setting is...
Page 83
83 The underlining (__) denotes the factory setting mode. Setup menus (continued) Formats in which the tape is played back No./Item Description of setting 031*4 OUT REFVideo output reference 0000AUTO:When the HD REF input signal is supplied, it is used as the reference. If it is not supplied but the SD REF input signal is supplied, the SD REF signal serves as the reference instead. If neither the HD REF nor SD REF input signal is supplied, the HD serial signal serves as the reference. If none of the HD...
Page 84
84 Setup menus The underlining (__) denotes the factory setting mode. No./Item Description of setting 100 SEARCH ENAFor selecting the direct search dial operation.0000DIAL: Direct search dial operations are performed. 0001 KEY: Operation does not transfer to the search mode unless the SHTL, JOG or VAR button is pressed. 101 SHTL MAXFor selecting the maximum speed of shuttle operations. 0000k 9.8:k9.8 times normal speed0001k16:k16 times normal speed0002k 32:k32 times normal speed Depending on the tape...
Page 85
85 Setup menus The underlining (__) denotes the factory setting mode. (continued) 113*1 REC INH For selecting whether to allow or inhibit recording on the cassette tape. 0000OFF:Recording on the cassette tape is enabled when the cassette’s accidental erasure prevention mechanism has been set to the recording enable position. 0001 ALL:All recording on the cassette tape is inhibited.0002 PRE:Overwriting is inhibited during normal recording. This is the setting to activate the accidental erasure prevention...
Page 86
86 Setup menus The underlining (__) denotes the factory setting mode. (continued) No./Item Description of setting 118*1 SP MODE INHFor selecting whether to allow or inhibit recording on a tape which has been written by a format other than DVCPRO HD-LP.0000 OFF: Recording on the cassette tape is allowed. 0001ON: Recording on the cassette tape is inhibited. •When 0 (OFF) has been selected, whether recording on the cassette tape is allowed or inhibited is determined by the setup menu item No.113 (REC INH)...
Page 87
204 RS232C SELFor selecting whether the RS-232C connector is to function. 0000OFF:The RS-232C connector does not function. 0001 ON:The RS-232C connector functions. 87 Setup menus The underlining (__) denotes the factory setting mode. No./Item Description of setting 200 PARA RUNFor selecting whether to operate two or more VTRs in synchronization. 0000DIS:The VTRs are not operated in synchronization. 0001 ENA:The VTRs are operated in synchronization. To operate the VTRs in synchronization, set all the...
Page 88
88 Setup menus The underlining (__) denotes the factory setting mode. No./Item Description of setting 300 IN/OUT DELFor selecting the operation to be performed when an edit point has been set incorrectly (when the OUT point comes before the IN point). 0000 MANU: Editing is not performed unless the illegal edit point is cleared or set properly. 0001AUTO: The edit point which had already been input is cleared automatically. 301 NEGA FLASHFor selecting whether to show a negative display (time code display...
Page 89
89 Setup menus The underlining (__) denotes the factory setting mode. (continued) No./Item Description of settingNo./Item Description of setting 324*1 EDIT RPLCECAs with setup menu item No.320, the VTR’s CUE edit presets are set to ON or OFF following the analog audio signals specified by the editor or controller. 0000N-DEF: Not set. 0001 CH1: The analog CH1 edit presets are followed. 0002 CH2: The analog CH2 edit presets are followed. 0003 CH1+2: The analog CH1 or CH2 edit presets are followed. 320*1...
Page 90
90 Setup menus The underlining (__) denotes the factory setting mode. The cumulative total standby time passed in the same location increases at such times when the same material is repeatedly used as is the case when programs are transmitted, for example. No./Item Description of settingNo./Item Description of setting 401 SRC PROTECTFor selecting the operation to be performed when the tape protection mode is established after the VTR has been left standing in the STILL status in a search mode (JOG, VAR...