Panasonic Aj Hd1700 Operating Instructions Manual

101
Setup menus
The underlining (__) denotes the factory setting mode.
 (continued)
No./Item Description of settingNo./Item Description of setting
739
CH2 CUE SELFor selecting the CH2 output status of the
main signal line in the search mode.
0000OFF:
The CUE signal is not output.
0001 ON:
The CUE signal is output.

For details on the audio output statuses, refer to “Audio
outputs in the search mode” on page 103.
740
CH3 CUE SELFor selecting the CH3 output status of the
main signal line in the search...

102
749*1
AUDIO PB VRFor selecting whether the playback level
adjustment controls are to function in the EE
mode when INT SG has been selected on the
 function menu.
0000DIS:The INT SG output level is fixed
at the UNITY level.
0001 ENA:The INT SG output level can be
varied using the playback level
adjustment controls.
Setup menus
The underlining (__) denotes the factory setting mode.
 (continued)
No./Item Description of settingNo./Item Description of setting
750
ANA CH1 SELFor selecting the signal to be...

103
Setup menus
 (continued)
No./Item Description of settingNo./Item Description of setting
763
METER
SCALE
(This menu is
not displayed for
AJ-HD1700E.)
For selecting the scale display of the audio
level meter.
0000PEAK_0:
[The audio level is displayed with 0 dB as the
maximum level.
0001 REF_0:
The audio level is displayed with 0 dB as the
reference level.
Audio outputs in the search modeThe table below lists the signals which are output to the monitor and main signal line and which are determined by...

104
Setup menus
The underlining (__) denotes the factory setting mode.

No./Item Description of setting
A02
P. ON LOADThis VTR is equipped with VTR MEMORY
for storing the current settings (*1) and VTR
MEMORY  to  for backing up VTR
MEMORY .  The data of a selected VTR
MEMORY  to  can be loaded into VTR
MEMORY  and operation started on the
basis of this data when the power is turned
on.
0000OFF:
Operation is started using the previous
settings.
0001 USER1:
The VTR MEMORY  data is loaded and
operation...

105
Setup menus
Follow the steps below to switch the system frequency (59/60 Hz, 50 Hz, 23/24 Hz, 25 Hz (HD) or 25 Hz(SD)).

1Following the procedure for the  (page 60) to change the
system menu item No.25 (SYSTEM FREQ) setting.
2Press  (SET) to enter the setting, and after the
function menu shown on the time code display area
>has been cleared, the following message
appears.
F5
3To make the setting entered in step 2 valid, press
the  button while holding down the  button.
The system is restarted, and...

2F
106
2F 2F
Setup menus

The system menu and setup menu have some items whose settings differ and other items with which no
selection options are displayed and whose settings are fixed (indicated by the shading in the table below),
depending on the switching of the operation mode in response to the setting selected for system menu item
No.25 (SYSTEM FREQ).  (Refer to the table below.)
 50-pin connector registration
•When the items whose settings differ have been
registered in the  50-pin connector
pins,...

60/24
107
Setup menus
No. Menu itemSystem menu No.25 (SYSTEM FREQ)
59/60 23/24 50 25 (HD)
d
12h
24h
Same as for
59/60002 TAPE TIMER
OFF
ON004 SYNCHRONIZE
MANUAUTO 010 MONI CONTROL
0s to 3sto 5s 012 REC ADJUST
OFF
ON 013 DET STOP
AUTOINPUT
HD_REF
SD_REFHD_REF
Same as for
59/60Same as for
59/60 031 OUT REF
S/F/RSTOP 105 AUTO EE SEL
NORMALTHRU 107 EE MODE SEL
OFFON 111 MEMORY STOP
OFFALL
PRE
NORMAL
V/CTLALL ALL 113 REC INH
RECOFF 115 EJECT SW INH
OFF
ON118 SP MODE INH
OFFLOW
HIGH 135 DET BEEP
EETAPETAPETAPE...

OFFOFFSame as for
59/60
PRE PRE 50
Same as for
59/60
108
BLANK
THRUBLANK BLANK 500 VITC BLANK
Setup menus
Setup menus
No. Menu itemSystem menu No.25 (SYSTEM FREQ)
59/60 23/24 25 (HD) 25 (SD)
N-DEF
CH1
CH2
CH1+3
320 EDIT RPLCE1
321 EDIT RPLCE2
322 EDIT RPLCE3
323 EDIT RPLCE4
Same as for
59/60 324 EDIT RPLCEC
REGEN
PRE
AUTO
PRE 503 TCG  MODE
TC&UBTC
UB 505 TCG REGEN
AS&INASSEM
INSRT 506 REGEN MODE
INTEXT_L
SLTC
SVITC 507 TC SOURCEREC
FREE 504 RUN MODE
NDF
V OUT
TC IN 512 TC OUT REF
DFNDFNDF NDF 511 DF...

109
Setup menus
Setup menus
No. Menu itemSystem menu No.25 (SYSTEM FREQ)
59/60 23/24 50 25 (HD)25 (SD)
The underlining (__) denotes the factory setting mode.BLANK
1080i720p
- - - 634 480p #
HD OUT
480p480p
480i 635 480p #
SD OUT
1080i720p
- - - 636 480i #
HD OUT
480i480i
480p 637 480i #
SD OUT
FIT_V
FIT_H
FIT_HV
Same as for
59/60 638 IN U/C MODE
STDNARROW 639 I U/C RESP H
STDNARROW 640 I U/C RESP V
Pb-Pr
U-V
Same as for
59/60 651 HUE STYLE
OFFON 676 BLK CLIP
BLANK
THRUBLANK BLANK 680 CC (F1) BLANK
BLANK...

Same as for
59/6025 (SD)
110
Setup menus
No. Menu itemSystem menu No.25 (SYSTEM FREQ)
59/60 23/24 50 25 (HD)
Setup menus
The underlining (__) denotes the factory setting mode.
719 CH7 IN SEL
720 CH8 IN SEL
AESSDI 721 D IN SEL 12
722 D IN SEL 34
723 D IN SEL 56
724 D IN SEL 78
CH1 to CH3i i
4 725 REC CH1726 REC CH2
727 REC CH3
728 REC CH4
CH5 to CH7i i
8 729 REC CH5
730 REC CH6
731 REC CH7
732 REC CH8
CUEto CH1j j
8 733 REC CUE
AUTOCUT
FADECUT CUT 734 PB FADE
DIS
ENA 749 AUDIO PB VR
OFFON 760 REC PT MUTE...