Panasonic Aj Hd1700 Operating Instructions Manual
Here you can view all the pages of manual Panasonic Aj Hd1700 Operating Instructions Manual. The Panasonic manuals for Cassette Player are available online for free. You can easily download all the documents as PDF.
Page 51
d d12h 24h 51 Function menus The TC-related settings are performed on these menu screens.Whether the TC is to be superimposed onto the display can also be set on this screen. Function button/item Switching method Corresponding setup menu item F1 TC SRCToggle No. 507 TC SOURCEDescription of setting Refer to the setup menu.Setting When HD SDI, INT SG or SDTI is selected:INTEXT_L SLTC SVITC When SD SDI is selected: INT EXT_L VITC F5 RUN MDToggle No. 504 RUN MODERefer to the setup menu. RECFREE F6 DF MODF...
Page 52
52 Function menus Moving to registered points The highlighting on the registered point display area is moved by turning the ADJUST dial. It is moved in the ascending order of points when the dial is turned clockwise and in the descending order of points when it is turned counterclockwise. When “AUTO” has been selected as the (PAGE) setting on the menu, the highlighting can be moved also to the previous or next page. •Depending on the setting selected for (ROTATE) on the menu, the following...
Page 53
53 Search mode The desired search point can be selected, and the tape can be prerolled to that point. When the display page has been changed using the [(PREV) or (NEXT) button on the menu, the following applies depending on the setting for (PAGE) on the menu. When “MANU” is set: Both the search and registered points move to the top of the changed page. When “AUTO” is set: Only the search point moves to the top of the changed page; the registered point does not move. Cue point registration Turn the...
Page 54
54 Function menus *The underlining (__) denotes the factory setting mode. Function button/item Switching method Corresponding setup menu item F1 PREVPress ___Description of setting For multi-cue page forward scrolling.Setting ___ F2 NEXTPress ___For multi-cue page reverse scrolling. ___ F4 CLRPress ___For clearing the currently selected cue data. ENTRY must be selected as the F3 (MODE) setting. ___ F5 AL CLRFi Press___When MANU is selected by SHIFT + F3 (PAGE): All the cue data on the currently...
Page 55
55 Function menus Warning display When a warning occurs in this VTR, the warning mark (W) blinks at the top left of the screen. If (WARN) is now pressed, the details of the warning can be checked out on the LCD monitor. When more than one warning has occurred, turn the ADJ dial to scroll through the messages. Hour-meter display When (HOURS) is pressed, the hour-meter information can be checked out on the LCD monitor.F2 F1 Error log function The error log mode can be selected by pressing the button...
Page 56
56 Function menus Function button/item Switching method Corresponding setup menu item F1 WARN___ ___Description of setting For displaying the warning messages on the LCD monitor.Setting ___ F2 HOURS___ ___For displaying the hour-meter on the LCD monitor. ___ F1 (SHIFT) STEPToggle No. 015 AUTO STEPRefer to the setup menu. OFFON F2 (SHIFT) CARDFi Press___For calling the error log file operation menu. ___ F4 (SHIFT) ___ ___ ___ ______ F5 (SHIFT) AL CLRFi Press___For clearing error log files. ___ F3 ______...
Page 57
57 Function menus *The underlining (__) denotes the factory setting mode. These enable movement to the menu screens for operations (adjustments, saving data onto or loading it from the internal memory or IC cards) relating to the SYSTEM and SETUP menus. Function button/item Switching method Corresponding setup menu item F1 FILEFi Press___Description of setting For calling the operation menu for saving the SYSTEM and SETUP adjustment values (in the internal memory).Setting ___ F2 CARDFi Press___For...
Page 58
58 Function menus Function button/item Switching method Corresponding setup menu item F1 ASSEMToggle ___Description of setting For setting the editing mode to ON or OFF. When the display is highlighted, the ASSEMBLE editing mode is set to ON, and the ASSEM button lights.Setting OFF ON F2 ______ ___ ______ F3 ______ ___ ______ F4 ______ ___ ______ F5 ______ ___ ______ F6 ______ ___ ______ *The underlining (__) denotes the factory setting mode. The ASSEMBLE editing mode is selected on this menu screen....
Page 59
59 Function menus Registering the edit points After the edit IN and OUT points have been registered, the and buttons light. Automatic editing and manual editing •When the editing mode has been selected (the button is lighted), automatic editing or manual editing can be performed even after the INSERT screen has been exited. •After the edit IN and OUT points have been registered (the and buttons are lighted), the tape can be prerolled to an IN point or cued up to an IN or OUT point even after the...
Page 60
60 Function menus Selecting the menu items Select the menu item by turning the ADJ dial. (The cursor is moved down when the dial is turned clockwise and up when it is turned counter- clockwise.) •Forward or reverse page scrolling (SETUP menu only) The menu list is organized by category, and the pages can be scrolled in the forward or reverse direction on a category by category basis. (: PREV), (; NEXT) The screen may continue to scroll for a few moments after the ADJ dial has been turned. F2F1...