Panasonic Aj Hd1700 Operating Instructions Manual
Here you can view all the pages of manual Panasonic Aj Hd1700 Operating Instructions Manual. The Panasonic manuals for Cassette Player are available online for free. You can easily download all the documents as PDF.
Page 21
21 Note concerning tapes played back by this VTR •Use tapes which have been shot by a variable frame rate camera. •Do not use tapes which are copies of shot tapes or edited tapes. Doing so will cause the tape management information to be lost, and normal conversion and playback may not be possible as a result. •To convert a tape, which was recorded at a frame rate other than 24fps (25fps), to 1080/24psf (1080/25psf), use a frame rate converter (AJ-FRC27) which is available as an optional accessory....
Page 22
22 Example of connections with an editing controller Connections POWEROFFON HEADPHONES PUSH LOCKFULL CH CONDITIONMONITORFULL/FINEREMOTELR9P 50PRS-232CCH12 3 4 5 6 7 8CUEXL/L/M-cassetteDo not insert S-cassette without adapterEJECT AUDIO CH SELECTSHIFTABC DEF GHI JKL MNO PQRSPREVIEW/ REVIEWPRE- ROLLA IN A OUT HOME RF1 ASSEMADJUSTSHTL REV FWDVA R JOG STAND BYRECORDER INPUT CHECKPLAYERSERVOEDIT PLAY REC REW STOP FFREC INHIBIT PUSH-INTERINSERT RF2 VIDEOUNITYTC CUE AUDIOUNITYDIAG MENU TRIMSET INOUTAUTO...
Page 23
23 POWEROFFON HEADPHONES PUSH LOCKFULL CH CONDITIONMONITORFULL/FINEREMOTELR9P 50PRS-232CCH12345678CUE XL/L/M-cassetteDo not insert S-cassette without adapterEJECT AUDIO CH SELECTSHIFTABC DEF GHI JKL MNO PQRSPREVIEW/ REVIEWPRE- ROLLA IN A OUT HOME RF1 ASSEMADJUSTSHTL REV FWDVA R JOG STAND BYRECORDER INPUT CHECKPLAYER SERVOEDIT PLAY REC REW STOP FFREC INHIBIT PUSH-INTERINSERT RF2 VIDEOUNITYTC CUE AUDIOUNITYDIAG MENU TRIMSET INOUTAUTO EDIT789 456BSTUV WXYZ123ENT0CT F F1 F2 F3 F4 F5...
Page 24
24 Before starting to operate the VTR, check whether the equipment has been connected properly. Turning on the power and inserting the cassette 1Turn on the VTR’s power. 3Insert the cassette tape. Without forcing it, insert the cassette tape at the prescribed position. 4Check that the STOP lamp is lighted. When the tape is inserted, the cylinder starts rotating automatically, the tape is loaded, and the VTR is set to the STOP mode. The EJECT lamp goes off. 2Check that the AUTO OFF lamp is off. If...
Page 25
25 Recording 1Set the accidental erasure prevention tab on the cassette tape to the “recording” position, and insert the tape. 3Select “EE” as the OUTPUT setting using on the menu. E-E pictures now appear on the TV monitor.F1 4Check that the REC INHIBIT lamp is off. If the lamp is lighted, select “OFF” as the R INH setting using on the menu. If the inserted cassette has already been recorded on using a format other than DVCPRO HD-LP, the recording inhibited status (factory setting) will be set by...
Page 26
26 Playback 1Insert the cassette tape, and set the VTR to the STOP mode. 3Adjust the audio playback levels. Before adjusting the playback levels, check that the PB LED is lighted and that the audio adjustment dial is in the unlocked status. If the dial is locked (indicated by the lighted LOCK LED), press it. The LOCK LED goes off, and the lock is released. The analog cue audio level is adjusted using setup menu item No.791 (CUE PB VOL). Normally, the VTR is kept in the UNITY status (the segment...
Page 27
27 Jog mode Jog/Shuttle 1Press the JOG button. Shuttle mode 1Press the SHTL button. 3To transfer the VTR from the jog mode to another mode, press the button that corresponds to the mode concerned. 2Turn the search dial. The dial’s click-stops are released, and the tape is played back at the speed corresponding to the speed at which the dial is turned. The maximum jog speed can be changed by selecting the setup menu item No.310 (JOG FWD MAX) and No.311 (JOG REV MAX) settings. When the dial is no longer...
Page 28
28 Manual Editing 1Select the editing mode. ASSEM button: Assemble (frame-to-frame continuity) editing is performed using this button. INSERT button: Insert editing is performed using this button. 2On the time code display, select the channels to be edited. ASSEM: Set ASSEM to ON using the button. INSERT: To select V, A1, A2, A3, A4 and CUE channels, press the to buttons; to select A5, A6, A7, A8 and TC channels, press the + to + buttons. The highlighted channels will now be edited. F6SHIFT...
Page 29
29 POWEROFFON HEADPHONES PUSH LOCKFULL CH CONDITIONMONITORFULL/FINEREMOTELR9P 50PRS-232CCH12 3 4 5 6 7 8CUE XL/L/M-cassetteDo not insert S-cassette without adapterEJECT AUDIO CH SELECTSHIFTABC DEF GHI JKL MNO PQRSPREVIEW/ REVIEWPRE- ROLLA IN A OUT HOME RF1 ASSEMADJUSTSHTL REV FWDVA R JOG STAND BYRECORDER INPUT CHECKPLAYER SERVOEDIT PLAY REC REW STOP FFREC INHIBIT PUSH-INTERINSERT RF2 VIDEOUNITYTC CUE AU DI OUNITYDIAG MENU TRIMSET INOUTAUTO EDIT789 456BSTUV WXYZ123ENT0CT F F1 F2 F3 F4 F5...
Page 30
30 Automatic Editing (deck-to-deck) 1Select the editing mode. ASSEM button: Assemble (frame-to-frame continuity) editing is performed in this mode. INSERT button: Insert editing is performed in this mode. 2On the time code display, select the channels to be edited. ASSEM: Set ASSEM to ON using the button. INSERT: To select V, A1, A2, A3, A4 and CUE channels, press the to buttons; to select A5, A6, A7, A8 and TC channels, press the + to + buttons. The highlighted channels will now be edited....