Home > Palm > PDAs > Palm I705 Wireless Handheld Instructions Manual

Palm I705 Wireless Handheld Instructions Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Palm I705 Wireless Handheld Instructions Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 41 Palm manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Viewing Preferences
    181
    To edit the IR to Phone connection:
    1.Select the IR to Phone connection and tap Edit.
    2.Ta p  D e t a i l s .
    3.Tap the Speed pick list and select the appropriate speed.
    4.Enter the initialization string supplied by the documentation for the modem 
    attached to your mobile phone, if necessary.
    5.Tap OK, and then tap OK again to save the configuration.
    After you create the configuration, you need to set up the HotSync Manager of 
    your Desktop application and the HotSync application of your handheld to 
    perform a modem HotSync operation. 
    Network preferences and TCP/IP software
    Although your handheld is wirelessly enabled, you can also use TCP/IP software 
    that is included in the handheld operating system to connect with Internet Service 
    Providers (ISPs) or dial-in (remote access) servers. You will need an optional 
    modem accessory that also supports TCP/IP settings.
    To use TCP/IP, you must create a configuration in Connection Preferences and 
    then create Network Preferences settings. 
    The Connection Preferences screen enables you to define several ways that your 
    handheld can use the a modem to communicate with remote devices. For example, 
    you can communicate with your ISP server, or with your computer if you are away 
    on travel. See “Connection preferences” earlier in this chapter for a complete 
    explanation on how to create modem configurations.
    Tap here  
    						
    							Chapter 17 Setting Preferences for Your Handheld
    182
    After you configure both the Connection and Network Preferences, you can 
    establish a PPP (Point-to-Point Protocol) connection with your ISP or dial-in server. 
    You can do this either by using menu commands from the Network Preferences 
    screen or by using a third-party application. 
    NOTETCP/IP provides the ability to connect to your ISP or dial-in server with 
    applications that allow you to view the transmitted data. Visit the web site 
    www.palm.com
     for information on third-party applications that take advantage of 
    TCP/IP.
    Selecting a service
    Use the Service setting to select the service template for your Internet Service 
    Provider or a dial-in server. Service templates are a set of ISP and dial-in server 
    configuration settings that you can create, save, and reuse.
    To select a service:
    1.Tap the Service pick list.
    2.Tap the predefined service template you want to use.
    Entering a user name
    The User Name setting identifies the name you use when you log into your 
    Internet Service Provider or your dial-in server. Although this field can contain 
    multiple lines of text, only two lines appear onscreen.
    Tap here to display a 
    list of service 
    templates 
    						
    							Viewing Preferences
    183
    To enter a user name:
    1.Tap the User Name field. 
    2.Enter your user name.
    NOTEMost dial-in servers do not accept spaces in the user name.
    Entering a password
    The Password box identifies the password you use to log into your server or ISP. 
    Your entry in this field determines whether your handheld prompts you to enter a 
    password each time you log into your network:
    If you do not enter a password, your handheld displays the word “Prompt” in 
    this field and asks you to enter a password during the login procedure. 
    If you enter a password, your handheld displays the word “Assigned” in this 
    field and does not prompt you to enter a password during the login procedure.
    If you are concerned about security, select the Prompt option and do not enter a 
    password.
    To enter a password:
    1.Tap the Password field.
    2.Enter the password you use to log into your server.
    .
    3.Ta p  O K .  
    The Password field updates to display the word “Assigned.”
    Enter your user 
    name here
    Enter password here
    Ta p  h e r e 
    						
    							Chapter 17 Setting Preferences for Your Handheld
    184
    Selecting a connection
    Use the Connection setting to select the method you want to use to connect to your 
    Internet Service Provider or a dial-in server. See “Connection preferences” earlier 
    in this chapter for information about creating and configuring connection settings.
    To select a connection:
    1.Tap the Connection pick list.
    2.Tap the connection you want to use.
    Adding telephone settings
    When you select the Phone field, your handheld opens a dialog box in which you 
    define the telephone number you use to connect with your ISP or dial-in server. In 
    addition, you can also define a prefix, disable Call Waiting, and give special 
    instructions for using a calling card.
    To enter your server phone number:
    1.Tap the Phone field.
    2.Enter the phone number for your ISP or dial-in server.
    3.If you need to enter a prefix or disable Call Waiting, skip to those procedures. 
    Otherwise, tap OK.
    Entering a prefix
    A prefix is a number that you dial before the telephone number to access an outside 
    line. For example, many offices require that you dial “9” to dial a number outside 
    the building.
    Tap here to display a 
    list of available 
    connections
    Enter your ISP phone 
    number here 
    						
    							Viewing Preferences
    185
    To enter a prefix:
    1.Tap the Dial Prefix check box to select it.
    2.Enter the prefix. 
    3.Ta p  O K .
    Disabling Call Waiting
    Call Waiting can cause your session to terminate if you receive a call while you are 
    connected. If your telephone has Call Waiting, you need to disable this feature 
    before logging into your ISP or dial-in server.
    To disable Call Waiting:
    1.Tap the Disable call waiting check box to select it.
    2.Enter the code to disable Call Waiting on the Disable call waiting line.
    Each telephone company assigns a code to disable Call Waiting. Contact your 
    local telephone company for the code that is appropriate for you.
    3.Ta p  O K .
    Using a calling card
    The Use calling card field enables you to use your calling card when dialing your 
    ISP or Intranet server. Keep in mind that there is usually a delay before you enter 
    your calling card number. When you define your calling card number, you need to 
    add commas at the beginning to compensate for this delay. Each comma delays 
    transmission of your calling card number for two seconds.
    Enter your 
    prefix here Select this 
    box if you 
    need to use a 
    prefix
    Enter your disable 
    code here Select this 
    box if you 
    need to 
    disable Call 
    Waiting 
    						
    							Chapter 17 Setting Preferences for Your Handheld
    186
    To use a calling card:
    1. Tap the Use calling card check box to select it.
    2.Enter your calling card number on the Use calling card line.
    NOTEThe Phone Setup dialog box works correctly for AT&T and Sprint long-
    distance services. However, because MCI works differently, MCI customers 
    need to put the calling card number in the Phone # field and the phone number 
    in the Use calling card field.
    TIPIt’s a good idea to add at least three commas before your calling card 
    number to compensate for the cue delay.
    3.Ta p  O K .
    Connecting to your service
    After you set your Connection and Network Preferences, establishing a connection 
    to your Internet Service Provider (ISP) or your company’s network (dial-in server) 
    is easy.
    NOTEIf you are connecting to an ISP, you need a third-party application, such as a 
    web browser or news reader, to take advantage of this connection. For information 
    about third-party applications that support TCP/IP, check the web site 
    www.palm.com.
    To establish a connection:
    Tap Connect to dial the current service and display the Service Connection 
    Progress messages. 
    To see expanded Service Connection Progress messages, press the lower half of 
    the Scroll button.
    To close a connection:
    Tap Disconnect to terminate the connection between your handheld and your 
    service.
    Creating additional service templates
    You can create additional service templates from scratch or by duplicating existing 
    templates and editing information. After you create a new or duplicate template, 
    you can add and edit settings.
    Enter your 
    calling card 
    number here Select this 
    box to use a 
    calling card 
    						
    							Viewing Preferences
    187
    To add a new service template:
    1.Tap the Menu icon  . 
    2.Tap Service, and then tap New.
    An Untitled service template is added to the Service pick list.
    To duplicate an existing service template:
    1.Tap the Service pick list.
    2.Tap the predefined service template you want to duplicate.
    3.Tap the Menu icon  . 
    4.Tap Service, and then tap Duplicate.
    A copy of the service template is added to the Service pick list.
    Adding detailed information to a service template
    If you are using one of the predefined service templates, you probably only need 
    to enter your user name and telephone number. If you are creating a new service 
    template, you may need to provide additional information to your ISP or dial-in 
    server. You use the Details dialog box to add additional information to a selected 
    service template.
    To add connection details:
    1.Tap the service field.
    2.Ta p  D e t a i l s .
    Idle timeout
    The Idle timeout setting defines how long your handheld waits before dropping 
    the connection with your ISP or dial-in server when you switch out of a TCP/IP 
    application. 
    						
    							Chapter 17 Setting Preferences for Your Handheld
    188
    To set the Idle timeout:
    1.Tap the Idle timeout pick list and select one of the following options:
    2.Ta p  O K .
    Defining primary and secondary DNS
    The Domain Naming System (DNS) is a mechanism in the Internet for translating 
    the names of host computers into IP addresses. When you enter a DNS number (or 
    IP address), you are identifying a specific server that handles the translation 
    services.
    Each IP address has four sections, separated by periods. In the Details dialog box, 
    you enter each section separately. Each section of an IP address is made up of a 
    number from 0 to 255; numbers are the only allowable characters in this field.
    Ask your Internet Service Provider or System Administrator for the correct 
    Primary or Secondary DNS IP numbers.
    Many systems do not require that you enter a DNS. If you are not sure, leave the 
    DNS field blank.
    To enter a primary and secondary DNS:
    1.Tap the Query DNS check box to deselect it.
    2.Tap the space to the left of the first period in the Primary DNS field, and then 
    enter the first section of the IP address. 
    Each section must be a number from 0 to 255.
    3.Repeat step 2 for the second, third, and last sections of the Primary DNS field.
    4.Repeat steps 2 and 3 for the Secondary DNS number.
    5.Ta p  O K .
    IP address
    Everyone who logs on to the Internet needs to have a unique identifier (an IP 
    address), whether permanent or temporary. Some networks dynamically assign a 
    temporary IP address when clients log in. The IP Address field lets you identify 
    whether your network provides automatic (dynamic) temporary IP addressing.
    1 minuteWaits one minute for you to open another application before it 
    drops the connection. 
    2 minutesWaits two minutes. 
    3 minutesWaits three minutes. 
    NeverKeeps your PPP or SLIP connection until you turn off your 
    handheld (or until it times out). This option works best with the 
    PalmModem accessory. 
    						
    							Viewing Preferences
    189
    If your IP address is permanently assigned, you need to get that information from 
    your System Administrator. If you are not sure, select Automatic.
    To identify dynamic IP addressing:
    Tap the IP Address check box to select it.
    To enter a permanent IP address:
    1.Tap the IP Address check box to deselect it and display a permanent IP address 
    field below the check box.
    2.Tap the space to the left of the first period then enter the first section of the IP 
    address. 
    Each section must be a number from 0 to 255.
    3.Tap and enter the remaining sections of the IP address.
    4.Ta p  O K .
    Login scripts
    A login script is a series of commands that automates logging in to a network 
    server, for example, your corporate network or your Internet Service Provider 
    (ISP). A login script is associated with a specific service template created in 
    Network Preferences.
    A login script is something that you are likely to receive from your IS System 
    Administrator if your company has a system in which you log in to the corporate 
    servers from your handheld using a modem or network connection. The script is 
    generally prepared by the System Administrator and distributed to users who 
    need it. It automates the events that must take place in order to establish a 
    connection between your handheld and the corporate servers.
    You can create login scripts in two ways:
    In a text editor on your desktop computer, in which you create a file with the 
    extension PNC, which you then install on your handheld using the Install Tool 
    (this method is not available to Mac computer users)
    In the Login Script dialog box on your handheld, accessed from the Details 
    dialog box in Network Preferences
    Tap to select automatic IP 
    address 
    						
    							Chapter 17 Setting Preferences for Your Handheld
    190
    NOTEYou can also use non-ASCII and literal characters in your login script.
    Creating a login script on your handheld
    You can create login scripts by selecting commands from the Command pick list in 
    the Login Script dialog. Some commands, such as Send, require you to supply 
    additional information. Those commands have a parameter field so that you can 
    add the necessary data.
    To create a login script:
    1.Tap Script.
    2.Tap the End pick list.
    3.Tap the command you want from the Command list. If the command requires 
    additional information, a field appears to the right of it for you to enter the 
    information. The following commands are available:
    Wait ForTells your handheld to wait for specific characters from the TCP/
    IP server before executing the next command.
    Wait For 
    PromptDetects a challenge-response prompt coming from the server 
    and then displays the dynamically generated challenge value. 
    You then enter the challenge value into your token card, which in 
    turn generates a response value for you to enter on your 
    handheld. This command takes two arguments, separated by a 
    vertical bar (|) on the input line.
    SendTransmits specific characters to the TCP/IP server to which you 
    are connecting.
    Tap here to see the list of 
    available commands
    Tap here 
    						
    All Palm manuals Comments (0)

    Related Manuals for Palm I705 Wireless Handheld Instructions Manual