OKI MC561dn User Manual

121 – Printing: Auto Tray Switching
MC361/MC561/CX2731 MFP Advanced User’s Guide
3Select “Paper Feed” from the panel menu.
4Select “All pages” and select “Auto Select”.
5Configure other settings if necessary and then start printing.
Note
If the print dialog contains only two menus and does not contain 
the options you expect to see for the Mac OS X 10.5 or 10.6, click 
the disclosure triangle beside the [Printer] menu.
Auto Tray Switching ___________
You can switch paper feed trays automatically. 
When...

122 – Printing: Auto Tray Switching
MC361/MC561/CX2731 MFP Advanced User’s Guide
1Press the  key.
2Press the down arrow key to select [Admin Setup], then press 
.
3Enter the administrator password.
4Use the arrow keys to select [Enter], then press .
5Press the down allow key to select [Print Setup], then press 
.
6 Make sure that [Print menu], is selected, then press .
7Make sure that [Tray Configuration] is selected, then press 
.
8Press the down arrow key to select [MP Tray Usage], then press 
.
9Press...

123 – Printing: Saving Toner
MC361/MC561/CX2731 MFP Advanced User’s Guide
4On the “Layout” tab, click “Advanced”.
5Click “Auto Tray Switch” under “Auto Tray Switch” and select 
“Auto Tray Switch” from the drop-down list.
6Click “OK”.
7Configure other settings if necessary and then start printing.
Mac OS X Printer Driver
Mac OS X 10.5 to 10.6
1Open the file you want to print.
2From the File menu”, select Print.
3Select Printer Functions from the panel menu.
4Select Paper Feed Options from Function Sets....

124 – Printing: Saving Toner
MC361/MC561/CX2731 MFP Advanced User’s Guide
Important!
• This function is invalid for 100% black.
• This function is disabled when you use the grayscale 
mode.
• This function is invalid in the following cases:
-configuring the CMYK colors in the PostScript 
application. 
- setting the grayscale mode in the PostScript 
application.
- using the application or operating system of CIE color.
Note
The density of the printed images with this function may vary in 
degree,...

125 – Printing: Saving Toner
MC361/MC561/CX2731 MFP Advanced User’s Guide
3Click “Preferences” (or “Properties”, depending on the version of 
Windows you are using).
4Select the Job Options tab.
5Select the Toner Save check box.
6Configure other settings if necessary and then start printing. 
Note
In the Windows PCL and PCL XPS printer drivers, you can also 
select ‘Office Document” on the “Color” tab which controls the 
amount of toner. The color density of he output image is even 
lower if you select...

126 – Printing: Secure Print
MC361/MC561/CX2731 MFP Advanced User’s Guide
Note
If the print dialog contains only two menus and does not contain 
the options you expect to see for the Mac OS X 10.5 or later, click 
the disclosure triangle beside the Printer menu.
Secure Print _________________
for MC561 and CX2731 MFP only
Note
The MFP must be equipped with an SD memory card to use this 
function.
You can assign a password to a print job so it can only be printed if 
the password is input at the MFP...

127 – Printing: Secure Print
MC361/MC561/CX2731 MFP Advanced User’s Guide
4Select the Job Options tab. 
5Select Secure Print under Job Type.
6Enter a job name in the Job Name box and a password in the 
Job Password box.
-If you select the Request Job Name for each print job check 
box, a prompt for the job name appears when you send the 
print job to the MFP.
7Click OK.
8Configure other settings if necessary and then start printing.
-The print job is sent to the MFP, but is not printed.
9Press the  key...

128 – Printing: Encrypted Secure Print
MC361/MC561/CX2731 MFP Advanced User’s Guide
Encrypted Secure Print ________
for MC561 and CX2731 MFP only
Note
The MFP must be equipped with an SD memory card to use this 
function.
You can encrypt your documents before sending them from a 
computer to the MFP, preventing unauthorized access to confidential 
information. 
The documents are stored in an encrypted format on the SD memory 
card in the MFP until you enter the registered password at the MFP 
control...

129 – Printing: Encrypted Secure Print
MC361/MC561/CX2731 MFP Advanced User’s Guide
Important!
• If there is not enough space on the SD memory card for 
the spooled data, a message indicating the file system is 
full appears and the print job does not start.
• This function is not available with printer drivers for the 
64-bit editions of Windows 7, Windows Server 2008, 
Windows Vista, Windows Server 2003, and Windows XP.
• This function is not available with the Windows PCL XPS or 
Mac OS X printer...

130 – Printing: Watermark Printing
MC361/MC561/CX2731 MFP Advanced User’s Guide
11Press the down arrow key to select [Encrypted Job], then press 
.
12Enter the password you set above in the [Password] box, then 
press .
Press the  key if you enter a wrong number.
Press the  key if you want to stop the job search.
13Make sure [Print] is selected, then press .
If you select [Delete], you can delete the print job, and all of the 
encrypted jobs with the same password are deleted as well.
Watermark Printing...