OKI MC561dn User Manual

171 – MFP Menu: Admin Setup
MC361/MC561/CX2731 MFP Advanced User’s Guide
Admin Setup_________________
— Copy Setup: see below
— Fax Setup: see page 173
— Internet Fax Setup: see page 176
— Scanner Setup: see page 177
— Print from USB Memory: see page 181
— Print Setup: see page 181
— Network Setup: see page 191
— Management: see page 198
— User Install: see page 203
Note
To enter the [Admin Setup] menu, an administrator password is 
necessary. The default password is aaaaaa.
Admin Setup: Copy Setup >...

172 – MFP Menu: Admin Setup
MC361/MC561/CX2731 MFP Advanced User’s Guide
Image  
SettingsResolution (Color) Normal Sets the default resolution.
Background 
Removal3 Sets the default background 
removal.
Contrast 0 Sets the default contrast.
Hue 0 Sets the default red-green 
color balance.
Saturation 0 Sets the default saturation set-
ting.
RGB adjustment R:0, G:0, 
B:0Sets the default RGB contrast.
Direction Portrait Selects the default page orien-
tation. 
ID Card Copy OFF Sets the default for using the...

173 – MFP Menu: Admin Setup
MC361/MC561/CX2731 MFP Advanced User’s Guide
Admin Setup: Fax Setup 
Item Default Description
Default 
SettingsResolution Normal Sets the default image 
quality setting.
Density 0 Sets the default image 
density.
Scan Size Letter Sets the default scan 
size.
Continue Scan OFF Sets whether or not to 
use the continue scan 
mode.
TTI ON Sets whether or not to 
add the sender’s name 
to the transmitted fax 
header.
Transmit Confirmation 
ReportOFF Sets whether or not to 
print...

174 – MFP Menu: Admin Setup
MC361/MC561/CX2731 MFP Advanced User’s Guide
Fcode 
BoxBulle-
tin BoxBox 
Name(NULL) Sets a bulletin box 
name. 
 
Maximum 16 characters.
Sub-
Addres
s(NULL) Sets a sub-address for 
your bulletin box. 
 
Maximum 20 characters.
Delete Deletes an Fcode box.
Secu-
rity 
Func-
tionID Check Tx OFF Sets whether or not to 
use the ID check trans-
mission.
Check broadcast dest. ON Sets whether or not to 
indicate the destination 
number before starting 
transmission.
Confirm Dial OFF...

175 – MFP Menu: Admin Setup
MC361/MC561/CX2731 MFP Advanced User’s Guide
Other 
SettingsECM Mode ON Sets whether or not to 
use the error correction 
mode.
PreFix (NULL) Sets the dialing prefix. 
Maximum 40 digits.
Received Time Stamp OFF Sets whether the time 
stamp is printed on 
incoming faxes.
Print Check Message ON Sets whether the error 
content is reported when 
a transmission error 
occurs.
Fax 
basic 
SettingService Bit OFF If set to [
OFF], some 
menu items are not dis-
played on the screen....

176 – MFP Menu: Admin Setup
MC361/MC561/CX2731 MFP Advanced User’s Guide
Admin Setup: Internet Fax Setup > 
Default Settings (MC561 and CX2731 
MFP only) 
Item Default Description
Scan Size Letter Sets the default scan size.
Density 0 Sets the default density of images.
Resolution Normal Sets the default setting of resolution.
Background Removal 3 Sets the default setup of the background 
removal.
Continue Scan OFF Sets whether or not to use the continue 
scan mode by default.
Compression Rate Low...

177 – MFP Menu: Admin Setup
MC361/MC561/CX2731 MFP Advanced User’s Guide
Admin Setup: Scanner Setup
ItemDefault 
ValueDescription
Default 
SettingsScan size Letter Sets the default scan size.
Image 
SettingsDensity 0 Sets the default image 
density.
Document Type Text & 
PhotoSets the document image 
quality.
Background 
Removal3 Sets the default setup of 
the background removal.
Resolution 200 dpi Sets the default resolution 
setting.
Contrast 0 Sets the default contrast 
setting.
Hue 0 Sets the default...

178 – MFP Menu: Admin Setup
MC361/MC561/CX2731 MFP Advanced User’s Guide
Default 
SettinsEn-
crypted 
PDF Set-
tingDocument open 
password(NULL) Sets the default password 
to open an encrypted PDF. 
Maximum 32 characters.
Permissions 
 
password(NULL) Sets a default password to 
control printing or editing 
on an encrypted PDF. 
 
Maximum 32 characters.
Display Default 
PasswordDisable Sets whether or not the 
registered password is dis-
played using asterisks (*) 
instead of each character.
Disable =...

179 – MFP Menu: Admin Setup
MC361/MC561/CX2731 MFP Advanced User’s Guide
Email 
SetupFile Name (NULL) Sets a file name of scanned 
images. Maximum 64 char-
acters.
The following options can 
be set as the default file 
name: 
#n: adding a serial number 
from 00000 to 99999
#d: adding the date of a 
file creation (yymmddh-
hmmss)
Template Edit Subject (NULL) Registers or edits standard 
e-mail subject text. 
 
Maximum 80 characters. 
Edit Body (NULL) Registers or edits standard 
e-mail body text....

180 – MFP Menu: Admin Setup
MC361/MC561/CX2731 MFP Advanced User’s Guide
Email 
SetupMCF Report ON Sets whether or not to 
print a fax confirmation 
after transmission.
Timeout of MCF Report 15 
 
minutesSets the timeout for print-
ing a fax confirmation after 
transmission. If the set 
period of time is exceeded, 
the report is automatically 
printed without the MDN 
response.
Print Check Message ON Sets whether or not the 
error content is reported 
when a transmission error 
occurs.
USB 
Memory...