OKI MC561dn User Manual

181 – MFP Menu: Admin Setup
MC361/MC561/CX2731 MFP Advanced User’s Guide
Admin Setup: Print From USB Memory 
Setup > Default Settings 
Admin Setup: Print Setup
Item Default Description
Paper Feed Tray 1 
(Letter)Sets the default feed tray.
Copies 1 Sets the number of copies.
Duplex OFF Sets whether to use the duplex function by 
default. 
Binding Long 
edge 
bindSets the default binding position for duplex print-
ing.
Fit ON Sets whether to scale the page size of documents 
to fit the paper size.
Item...

182 – MFP Menu: Admin Setup
MC361/MC561/CX2731 MFP Advanced User’s Guide
Print 
menuTr a y  C o n -
figurationMedia Check Enable Enables/disables check-
ing the paper size versus 
the document page size.
Print Setup Copies 1 Sets the number of cop-
ies to be printed. For 
local printing, this set-
ting is invalid except for 
demo data. 
 
Range: 1 to 999.
Duplex OFF Sets whether or not to 
use the duplex function 
by default.
Binding Long 
edge 
bindSets the default binding 
position for duplex print-...

183 – MFP Menu: Admin Setup
MC361/MC561/CX2731 MFP Advanced User’s Guide
Print 
menuPrint Setup Width 8.5 inch 
(216 
mm)Sets the default width of 
the custom size paper. 
Range: 64 to 216 mm 
(2.5 to 8.5 inches).
Length 11 inch 
(279 
mm)Selects the default 
length of the custom size 
paper. Available range: 
127 to 1321 mm (5.0 to 
52.0 inches).
Printer 
AdjustManual Timeout 60 sec-
ondsSets how many seconds 
the MFP will wait for 
paper to be fed before 
cancelling a job.
Wai t  T i me out 4 0 se c-...

184 – MFP Menu: Admin Setup
MC361/MC561/CX2731 MFP Advanced User’s Guide
Print 
menuPrinter 
AdjustPaper Color Set-
ting0 Sets values to make a 
fine adjustment to very 
visible faded print results 
or light specks (or 
streaks) results in plain 
paper color mode.
SMR Setting 0 Change the setting if the 
print quality is uneven.
BG Setting 0 Change the setting if the 
background is dark.
Print Posi-
tion AdjustFront X Adjust 0.00 mm Adjusts the position of 
the whole printing image 
perpendicular to the...

185 – MFP Menu: Admin Setup
MC361/MC561/CX2731 MFP Advanced User’s Guide
Print 
menuDrum Cleaning OFF Sets whether to do a 
drum cleaning before 
printing in order to 
reduce horizontal white 
lines.
Hex Dump OFF Prints out the data 
received from the host 
computer in hexidecimal 
code.
Color 
MenuDensity Control Auto Selects whether image 
density is automatically 
or manually adjusted.
Adjust Density Execute Starts the auto density 
setup.
Color Tuning/Print Pattern Prints the color tuning 
pattern to...

186 – MFP Menu: Admin Setup
MC361/MC561/CX2731 MFP Advanced User’s Guide
Color 
MenuCyan Darkness 0 Adjusts the darkness of 
each color (cyan, 
magenta, yellow and 
black).  Magenta Darkness 0
Yellow Darkness 0
Black Darkness 0
Adjust 
 
RegistrationExecute Does an automatic color 
registration adjustment.
CYAN Reg Fine Adj 0 Does a fine adjustment 
to the image position 
error of each color. MAGENTA Reg Fine Adj 0
YELLOW Reg Fine Adj 0
Ink Simulation OFF PS only. Sets the ink 
simulation.
UCR Low...

187 – MFP Menu: Admin Setup
MC361/MC561/CX2731 MFP Advanced User’s Guide
Sys-
tem 
Con-
figura-
tion 
MenuPersonality Auto 
Emula-
tionSelects the emulation 
mode. When set to auto, 
the correct emulation is 
automatically selected 
each time a print job is 
received.
Alarm release Manual [
Manual]: non-critical 
warnings, such as 
requests for a different 
paper size, can be 
cleared by pressing the 
 key.
[Auto]: they are cleared 
when the print job 
resumes.
Auto Continue OFF Sets whether the MFP...

188 – MFP Menu: Admin Setup
MC361/MC561/CX2731 MFP Advanced User’s Guide
PCL 
SetupA4 Print Width 78 Col-
umnSets a number of digits 
for automatic line feed 
on A4 paper. 
White Page Skip OFF Selects whether to print 
blank pages.
CR Function CR Sets the MFP operation 
when receiving CR code.
LF Function LF Sets the MFP operation 
when receiving LF code.
Print Margin Normal Sets the area of the 
page that is non-print-
able.
True Black OFF Selects whether black 
image data is printed by 
using black...

189 – MFP Menu: Admin Setup
MC361/MC561/CX2731 MFP Advanced User’s Guide
SIDM 
SetupSIDM Manual ID# 2 Sets a number to SIDM 
Manual, MP and Tray ID.
SIDM Manual2 ID# 3
SIDM MP Tray ID# 4
SIDM Tray1 ID# 1
SIDM Tray2 ID# 5
IBM 
PPR 
SetupCharacter Pitch 10 CPI Sets character pitch in 
IBM PPR emulation.
Font  Condense 12 CPI to 
20 CPISpecifies 12 CPI pitch for 
condense mode.
Character Set SET-2 Selects a character set.
Symbol Set IBM-437 Selects a symbol set.
Letter O Style Disable Sets the style that...

190 – MFP Menu: Admin Setup
MC361/MC561/CX2731 MFP Advanced User’s Guide
IBM 
PPR 
SetupFit to Letter Disable Sets the printing mode 
that can fit print data, 
equivalent to 11 inches 
(66 lines), in the letter-
size printable area.
Text Height Same Sets the height of char-
acters.
[
Same]: Regardless of 
CPI, character heights 
do not vary.
[
Diff]: As CPI varies, 
character heights vary.
EP-
SON 
FX 
SetupCharacter Pitch 10 CPI Sets character pitch in 
EPSON FX emulation.
Character Set SET-2 Selects a...