OKI MC561dn User Manual

101 – Printing: Custom Size Paper
MC361/MC561/CX2731 MFP Advanced User’s Guide
Note
• Custom sizes may not be available in some applications.
• Media narrower than 3.9 inches (100 mm) can cause paper 
jams.
• For banner media over 14 inches (356mm) long, use the rear 
exit tray.
• If banner media runs over the supports on the MP Tray, hold the 
excess by hand.
• When using tray 1 or optional tray 2, you can use the custom 
setting only when [Paper Size] is set to [Custom] (press the 
 key, then use the...

102 – Printing: Custom Size Paper
MC361/MC561/CX2731 MFP Advanced User’s Guide
- Enter a name for the new size in the Name box.
- Enter its dimensions in the Width and Length boxes.
7Click Add to save the custom paper size to the list and then 
click OK.
 You can save up to 32 custom sizes.
8Open the file you want to print.
9Select the registered paper size and start printing.
Windows PS Printer Driver
1Load the media in the MFP.
2Click Start and select Devices and Printers.
3Right-click the OKI MC561...

103 – Printing: Multiple Pages on One Sheet
MC361/MC561/CX2731 MFP Advanced User’s Guide
8Open the file you wish to print.
9Select the form you created and start printing.
Mac OS X PS Printer Driver
1Load the media in the MFP.
2Open the file you want to print.
3From the File menu, select Page Setup.
4Select Manage Custom Sizes from Paper Size.
5Click + to add an item to the list of custom paper sizes.
6Double-click Untitled and enter a name for the custom paper 
size.
7Enter the dimensions in the Width...

104 – Printing: Multiple Pages on One Sheet
MC361/MC561/CX2731 MFP Advanced User’s Guide
Note
• This function scales down the page size of your document for 
printing. The center of the printed image may not be in the 
center of the paper.
• This function may not be available in some applications.
Windows PCL/PCL XPS Printer Driver
1Open the file you want to print.
2From the File menu, select Print.
3Click “Preferences” (or “Properties”, depending on the version of 
Windows you are using).
4On the Setup...

105 – Printing: Duplex Printing
MC361/MC561/CX2731 MFP Advanced User’s Guide
Note
Draw Borders and Page per Sheet Layout are not available 
with Windows Server 2003, Windows XP, and Windows 2000.
6Configure other settings if necessary and then start printing.
Mac OS X Printer Driver
1Open the file you want to print.
2From the File menu, select Print.
3Select Layout from the panel menu.
4Select the number of pages to print on each sheet from Pages 
per Sheet.
5Specify each setting at Border and Layout...

106 – Printing: Duplex Printing
MC361/MC561/CX2731 MFP Advanced User’s Guide
Note
This function may not be available in some applications.
For details on the paper sizes and paper weight that can be used 
for duplex printing, see the Basic User’s Guide on the DVD 
supplied with your MFP.
Windows PCL/PCL XPS Printer Driver
1Make sure the rear exit tray on the MFP is closed.
2Open the file you want to print.
3From the File menu, select Print.
4Click “Preferences” (or “Properties”, depending on the version...

107 – Printing: Reducing/Enlarging Pages
MC361/MC561/CX2731 MFP Advanced User’s Guide
2From the File menu, select Print.
3Select Layout from the panel menu.
4Select Long-Edge binding or Short-Edge binding from Two-
Sided on the Layout panel.
5Configure other settings if necessary and then start printing.
Note
If the print dialog contains only two menus and does not contain 
the options you expect to see on the Mac OS X 10.5 or later, click 
the disclosure triangle beside the Printer menu....

108 – Printing: Collating Pages
MC361/MC561/CX2731 MFP Advanced User’s Guide
6Select the scaling factor you need from the Conversion drop-
down list and click OK.
7Configure other settings if necessary and then start printing.
Mac OS X Printer Driver
1Open the file you want to print.
2From the File menu, select Print.
3Select Paper Handling from the panel menu.
4Select the Scale to fit paper size check box.
5Select the paper size you want to use from Output Paper Size.
6Configure other settings if...

109 – Printing: Setting the Page Order
MC361/MC561/CX2731 MFP Advanced User’s Guide
Windows Printer Driver
1Open the file you want to print.
2From the File menu, select Print.
3Click “Preferences” (or “Properties”, depending on the version of 
Windows you are using).
4Select the Job Options tab.
5Select a number of copies to print from the Copies scrolling list 
and select the Collate check box.
6Configure other settings if necessary and then start printing.
Mac OS X Printer Driver
1Open the file you...

110 – Printing: Setting the Page Order
MC361/MC561/CX2731 MFP Advanced User’s Guide
If you want pages to be stacked in numeric order, forward order is 
usually appropriate with the face down stacker, and reverse order 
with the face up stacker.
If you are using the rear exit tray, set the print job to print in the 
reverse order to stack the paper in the order of the pages.
Notes
• Reverse order is not available with the Windows PCL/PCL XPS 
printer driver.
• If the rear exit tray (face up stacker) is...