OKI C7350DTN User Manual

C7350/7550 User’s Guide: Windows NT 4.0 Operation  •  471
6.Note the name that the file is assigned in the Storage Device 
Manager. 
Names are case sensitive.
 
7.Make sure the printer being used is highlighted in the lower 
window of the Storage Device Manager.
8.Select the Project menu.  Choose Send Project Files to 
Printer.
This downloads the file to the printer.
If the file was downloaded successfully, Command Issued 
displays.
9.Close the Storage Device Manager.
NOTE
The assigned file name is very...

C7350/7550 User’s Guide: Windows NT 4.0 Operation  •  472
Overlays
Defining Overlays
PostScript
1.Click Start → Settings → Printers.
2.RIght click the printer name. Click Document Defaults.
3.On the Job Options tab, click the Overlay button.
  C93_NT_PS_Overlay1.bmp 
Downloaded From ManualsPrinter.com Manuals 

C7350/7550 User’s Guide: Windows NT 4.0 Operation  •  473
4.Click the New button.  C93_Me_PS_Overlay2.bmp  
5.In the Overlay Name list, enter the file name of the overlay. 
Select the pages where you want the overlay to print.
 
NOTE
The Overlay Name must be EXACTLY the same as the file 
name you noted in the previous section. This is the name 
under which the file is stored on the printers’ hard disk 
drive. It is case sensitive.
Downloaded From ManualsPrinter.com Manuals 

C7350/7550 User’s Guide: Windows NT 4.0 Operation  •  474
6.Under Form setting, in the drop-down list, enter or select a 
form name. Click Add.
  C93_Me_PS_Overlay3.bmp 
 
7.Click OK.
8.To continue to add files to the overlay (if required), repeat steps 
5 through 8.
NOTE
The Form Name is a random name of your selection.
Downloaded From ManualsPrinter.com Manuals 

C7350/7550 User’s Guide: Windows NT 4.0 Operation  •  475
9.Under Defined Overlay, highlight the overlay name(s).  Click 
Add to add the overlay(s) to the list under Active Overlay.
To select more than one overlay, hold the CTRL key while 
clicking on each name.
  C93_NT_PS_Overlay2.bmp  
10.At the top of the dialog box, use the drop-down list to select 
Use Overlay. Click OK.
11.Click OK to close the Default dialog box.
Downloaded From ManualsPrinter.com Manuals 

C7350/7550 User’s Guide: Windows NT 4.0 Operation  •  476
Overlays
Defining Overlays
PCL
1.Click Start → Settings → Printers.
2.Highlight the printer name.  Click Document Defaults.
3.Click the Job Options tab.
4.Click the Overlay... button.
  pcl job options overlay.bmp  
Downloaded From ManualsPrinter.com Manuals 

C7350/7550 User’s Guide: Windows NT 4.0 Operation  •  477
5.To define an overlay, click the Define Overlays button.  C93_NT_PCL_Overlay1.bmp 
6.In the Overlay Name list, enter the file name of the overlay 
  
7.In ID Values, enter the ID of the file. Please refer to the 
instructions for the Storage Device Manager utility.
8.Select which pages the overlay is to be printed on from Print 
on Pages or use Custom Pages to select specific page 
numbers in the document. Click Add.
9.Click Close.
10.Repeat...

C7350/7550 User’s Guide: Windows NT 4.0 Operation  •  478
12.Select Print Using Active Overlays. C93_NT_PCL_Overlay2.bmp 
13.Click OK.
14.Click OK to close the Default dialog box.
Downloaded From ManualsPrinter.com Manuals 

C7350/7550 User’s Guide: Windows NT 4.0 Operation  •  479
Printing Posters
PCL Only
This option allows you to configure and print posters by breaking 
up the document page into multiple pieces.  Each piece prints, 
enlarged, on a separate sheet. Then, the separate sheets are 
combined to produce a poster. It is only available with the PCL 
printer driver.
1.Open the file in your application.  Select File → Print.
2.In the Print dialog box, click the appropriate PCL driver. 
Click Properties (or Setup, or...

C7350/7550 User’s Guide: Windows NT 4.0 Operation  •  480
4.Click Options... and enter the configuration details.
5.Click OK twice.
6.Print the document.
 C93_Me_PCL_Poster2.bmp  
Downloaded From ManualsPrinter.com Manuals