OKI C7350DTN User Manual

C7350/7550 User’s Guide: Windows NT 4.0 Operation  •  431
1.Open the file in your application.  Select File → Print.
2.In the Print dialog box, click the appropriate PS driver. 
Click Properties (or Setup, or your application’s equivalent).
 
Important!
If you are using heavy media, transparencies, envelopes or 
labels, use the face up (straight through) paper feed path.  
For face up printing (straight-through path), make sure the 
rear exit is open and the paper support is extended. 
• Paper is stacked...

C7350/7550 User’s Guide: Windows NT 4.0 Operation  •  432
3.On the Advanced tab, under Document Options → Paper/
Output:
a.Click Paper Source.  In the Change ‘Paper Source’ 
Setting list, select Multi-Purpose Tray.
  C73_NT_PS_Custom1K.tif  
Downloaded From ManualsPrinter.com Manuals 

C7350/7550 User’s Guide: Windows NT 4.0 Operation  •  433
b.Click Paper Size.
c.In the Change ‘Paper Size’ Setting list, select Postscript 
Custom Page Size.
  C73_NT_PS_Custom2K.tif 
Downloaded From ManualsPrinter.com Manuals 

C7350/7550 User’s Guide: Windows NT 4.0 Operation  •  434
4.Click the Edit of Custom Paper button. C93_NT_PS_Custom4.bmp 
Downloaded From ManualsPrinter.com Manuals 

C7350/7550 User’s Guide: Windows NT 4.0 Operation  •  435
5.Enter the Width and Height for the custom paper.
Custom page sizes range: 
•Width: 3½ to 8½ inches [89 to 216 mm]
•Length: 5 to 14 inches [127 to 356 mm]
6.Select the Paper Feed Direction.
  
7.Click OK twice.
8.Print the document.
NOTE
• Long Edge First = media feeds in long edge first 
• Short Edge First = media feeds in short edge first 
• Long Edge First (flipped) = Reserved for future 
use.
• Short Edge First (flipped) = Reserved for future...

C7350/7550 User’s Guide: Windows NT 4.0 Operation  •  436
Custom Page Sizes
PCL
  
Custom page sizes can only be printed from the multi purpose tray. 
The paper (media) size for the multi purpose tray must be 
manually set in the driver to the custom paper size before use.
Custom page sizes range: 
•Width: 3½ to 8½ inches [89 to 216 mm]
•Length: 5 to 14 inches [127 to 356 mm]
NOTE
Up to 32 custom page sizes can be defined in the PCL 
driver.
Downloaded From ManualsPrinter.com Manuals 

C7350/7550 User’s Guide: Windows NT 4.0 Operation  •  437
 
Important!
If you are using heavy media, transparencies, envelopes or 
labels, use the face up (straight through) paper feed path.  
For face up printing (straight-through path), make sure the 
rear exit is open and the paper support is extended. 
• Paper is stacked in reverse order.
• Tray capacity is about 100 sheets, depending on paper 
weight. 
 rear exit openK.eps  
Downloaded From ManualsPrinter.com Manuals 

C7350/7550 User’s Guide: Windows NT 4.0 Operation  •  438
1.Open the file in your application.  Select File → Print.
2.In the Print dialog box, click the appropriate PCL driver. 
Click Properties (or Setup, or your application’s equivalent).
3.On the Setup tab, under Media, in the Size drop-down list, 
select User Defined Size.
The Set Free Size dialog box appears.
  C73_NT_PCL_Custom1K.tif  
 
NOTE
You may see a Warning dialog box indicating a conflict. 
If you do, click OK.  
The driver automatically...

C7350/7550 User’s Guide: Windows NT 4.0 Operation  •  439
4.Select the unit. Enter the width and length measurements. 
Custom page sizes range: 
•Width: 3½ to 8½ inches [89 to 216 mm]
•Length: 5 to 14 inches [127 to 356 mm]
 C73_NT_PCL_Custom1K.tif 
5.Click OK.
6.Check that User Defined now appears in the Size list on the 
Setup tab.
 
7.Click OK.
8.Print the document.
NOTE
To save the setting for future use:
•Click Paper Feed Options. 
•Click Custom Size.
•Select the unit. 
•Enter the relevant...

C7350/7550 User’s Guide: Windows NT 4.0 Operation  •  440
Print Resolution
PCL or PostScript
Changing for a Print Job  
 
1.Open the file in your application.  Select File → Print.
2.In the Print dialog box, click the appropriate driver. 
Click Properties (or Setup, or your application’s equivalent).
3.Click the Job Options tab.
NOTE
To change the settings to apply to all jobs (default 
settings):
•Click Start → Settings → Printers.
•Right click the appropriate printer name.  
•Select Properties.
•Follow...