OKI C7350DTN User Manual

C7350/7550 User’s Guide: Windows NT Printer Drivers  •  391
Hard Disk Drive: Enabling
PostScript  
Certain options such as additional memory, the duplexer, or 
additional trays may be installed in your printer.
Before using the printer, you must enter the printer driver(s) and 
enable the options. You only need to do this once.
1.Click Start → Settings → Printers.
2.Highlight the printer name.  Click File then Properties.
3.Click the Device Settings tab.
4.Under Installable Options, make sure the Hard...

C7350/7550 User’s Guide: Windows NT Printer Drivers  •  392
Hard Disk Drive: Enabling
PCL  
Certain options such as additional memory, the duplexer, or 
additional trays may be installed in your printer.
Before using the printer, you must enter the printer driver(s) and 
enable the options. You only need to do this once.
1.Click Start → Settings → Printers.
2.Highlight the printer name.  Click File then Properties.
3.On the Device Option tab, click Printer Hard Disk.
4.Click OK.  Close the Printers...

C7350/7550 User’s Guide: Windows NT Printer Drivers  •  393
Paper Trays: Enabling
PostScript 
Certain options such as additional memory, the duplexer, or 
additional trays may be installed in your printer.
Before using the printer, you must enter the printer driver(s) and 
enable the options. You only need to do this once.
1.Click Start → Settings → Printers.
2.Highlight the printer name.  Click File then Properties.
3.Click the Device Settings tab. 
4.Under Installable Options, click Available Trays...

C7350/7550 User’s Guide: Windows NT Printer Drivers  •  394
Paper Trays: Enabling
PCL  
Certain options such as additional memory, the duplexer, or 
additional trays may be installed in your printer.
Before using the printer, you must enter the printer driver(s) and 
enable the options. You only need to do this once.
1.Click Start → Settings → Printers.
2.Highlight the printer name.  Click File then Properties.
3.On the Device Option tab, select the appropriate number of 
trays (not including the...

C7350/7550 User’s Guide: Windows NT Printer Drivers  •  395
Duplex Unit: Enabling
PostScript  
Certain options such as additional memory, the duplexer, or 
additional trays may be installed in your printer.
Before using the printer, you must enter the printer driver(s) and 
enable the options. You only need to do this once.
1.Click Start → Settings → Printers.
2.Highlight the printer name.  Click File then Properties.
3.Click the Device Settings tab. 
4.Under Installable Options, make sure the Duplex is...

C7350/7550 User’s Guide: Windows NT Printer Drivers  •  396
Duplex Unit: Enabling
PCL  
Certain options such as additional memory, the duplexer, or 
additional trays may be installed in your printer.
Before using the printer, you must enter the printer driver(s) and 
enable the options. You only need to do this once.
1.Click Start → Settings → Printers.
2.Highlight the printer name.  Click File then Properties.
3.Click the Device Option tab, click Duplex Option Unit.
4.Click OK.  Close the Printers...

C7350/7550 User’s Guide: Windows NT Printer Drivers  •  397
Paper Feed, Size and Media
Changing Defaults
PostScript  
The normal default for these items is automatic detection.
 
The following printer driver instructions are given as a guide only. 
Some software applications require the paper feed, size and media 
settings to be selected from within the software (under Page 
Setup).
1.Click Start → Settings → Printers.
2.Right click the printer name.  Click Document Defaults.
NOTE
If the settings in the...

C7350/7550 User’s Guide: Windows NT Printer Drivers  •  398
  
Important!
If you are using heavy media, transparencies, envelopes or 
labels, use the face up (straight through) paper feed path.  
For face up printing (straight-through path), make sure the 
rear exit is open and the paper support is extended. 
• Paper is stacked in reverse order.
• Tray capacity is about 100 sheets, depending on paper 
weight. 
 rear exit openK.eps  
Downloaded From ManualsPrinter.com Manuals 

C7350/7550 User’s Guide: Windows NT Printer Drivers  •  399
3.On the Advanced tab, under Document Options → Paper/
Output, click Paper Source.
4.Select the paper feed in the Change ‘Paper Source’ Setting 
list.
  C73_NT_PS_Sourcek.tif 
5.Click Paper Size.
6.Select the size in the Change ‘Paper Size’ Setting list.
  C73_NT_PS_Sizek.tif 
Downloaded From ManualsPrinter.com Manuals 

C7350/7550 User’s Guide: Windows NT Printer Drivers  •  400
7.Click Media Type.
8.Select the media from the Change ‘Media Type’ Setting list.
9.Click OK.  Close the Printers dialog box.
 C73_NT_PS_MediaTypek.tif 
Paper Feed, Size and Media
Changing Defaults
PCL  
The normal default for these items is automatic detection.
 
The following printer driver instructions are given as a guide only. 
Some software applications require the paper feed, size and media 
settings to be selected from within the...