OKI C7350DTN User Manual

C7350/7550 User’s Guide: Windows Me/98/95 Operation  •  351
Duplex Printing
(Printing on Both Sides of the Paper)
PostScript or PCL 
Usage Restrictions
  
•Standard paper sizes only.
•Paper weight range 20 to 28 lb. US Bond (75 to 105 g/m
²). 
•Paper must be loaded print side up. 
•Only Tray 1, optional Trays 2 and 3, and the High Capacity 
Feeder trays can be used for duplex printing. 
•The Multi Purpose (MP) tray cannot be used for duplex printing.
•Duplexing cannot be used if Paper Weight is set to...

C7350/7550 User’s Guide: Windows Me/98/95 Operation  •  352
Duplex Printing
(Printing on Both Sides of the Paper)
PostScript or PCL  
Using
1.Open the file in your application.  Select File → Print.
2.In the Print dialog box, click the appropriate PS driver.
3.Click Properties (or Setup, or your application’s equivalent).
4.On the Setup tab, under 2-Sided printing, select Long Edge 
Binding or Short Edge Binding.
5.Click OK. Print the document.
 C73_Me_PS_Duplex2k.tif and C73_Me_PCL_Duplex2k.tif...

C7350/7550 User’s Guide: Windows Me/98/95 Operation  •  353
Printing Booklets
PCL and Windows Me 
  
1.Open the file in your application.  Select File → Print.
2.In the Print dialog box, click the appropriate PCL driver. 
3.Click Properties (or Setup, or your application’s equivalent).
NOTES
• Available only in the Windows Me Operating 
System (not available for Windows 98 or 95).
• Available in the PCL printer driver only.
• You must have the duplex unit installed and 
enabled in order to print...

C7350/7550 User’s Guide: Windows Me/98/95 Operation  •  354
4.On the Setup tab, under Finishing Mode, in the drop-down 
list, select Booklet.
  C73_Me_PCL_Bookletk.tif  
5.Click the Options button. 
6.Set the Signature, 2pages, Right to Left, and Bind Margin, 
as required. See the online Help for information. 
7.Click OK.
  pcl booklet setup options.bmp 
8.Click OK.  Print the document.
Downloaded From ManualsPrinter.com Manuals 

C7350/7550 User’s Guide: Windows Me/98/95 Operation  •  355
Printing Watermarks
PostScript
1.Open the file in your application.  Select File → Print.
2.In the print dialog box, click the appropriate PS driver.
3.Click Properties (or Setup, or your application’s equivalent).
4.In the Select a watermark list, click the name of the 
watermark you wish to use.
  C73_Me_PS_Watermark1.bmp  
Downloaded From ManualsPrinter.com Manuals 

C7350/7550 User’s Guide: Windows Me/98/95 Operation  •  356
  
5.Under Print watermark, make your selections for how the 
watermark prints.
6.Click OK twice.
7.Print the document.
NOTE
To create a new watermark or edit an existing 
watermark:
• Click the New or Edit button.
• Enter the text for the watermark. Select the font, 
size, angle, etc., to be used.
 C73MePSWatermark2B.tif 
•Click OK.
Downloaded From ManualsPrinter.com Manuals 

C7350/7550 User’s Guide: Windows Me/98/95 Operation  •  357
Printing Watermarks 
PCL
1.Open the file in your application.  Select File → Print.
2.In the Print dialog box, click the appropriate PCL driver.
3.Click Properties (or Setup, or your application’s equivalent).
4.Click the Job Options tab. Click Watermark.
The Watermark dialog box appears.
5.Select a name from the Watermark list.
 C93_Me_Watermark1.bmp  
Downloaded From ManualsPrinter.com Manuals 

C7350/7550 User’s Guide: Windows Me/98/95 Operation  •  358
  
6.If you wish to print the watermark only on the first page of the 
document, select First Page only.
7.Click OK twice.
8.Print the document.
NOTE
To create a new watermark or edit an existing 
watermark:
• Click the New or Edit button.
 C93_Me_Watermark2.bmp 
• Enter the text for the watermark. Select the 
attributes (font, size, angle) to be used.
•Click OK.
The new watermark appears in the Watermark list.
Downloaded From ManualsPrinter.com...

C7350/7550 User’s Guide: Windows Me/98/95 Operation  •  359
Collating  
PCL or PostScript
Collating can be carried out with or without a hard disk drive 
installed. A printer with a hard disk drive performs better.
  
To use the printer driver to select collating:
1.Open the file in your application.  Select File → Print.
2.In the Print dialog box, click the appropriate driver.
3.Click Properties (or Setup, or your application’s equivalent).
4.Click the Job Options tab.  Under Job Type, enter the number...

C7350/7550 User’s Guide: Windows Me/98/95 Operation  •  360
Font Substitution
PostScript Only
1.Click Start → Settings → Printer.
2.Right click the appropriate PS driver.
3.Click Properties (or Setup, or your application’s equivalent).
4.Click the Fonts tab.
5.Select the type of font substitution from the various options 
given Use the on-line Help screen for information.
 C73_Me_PS_Fontsk.tif  
6.Click OK to engage the new settings and close the Properties 
dialog box.
Downloaded From ManualsPrinter.com...