OKI C7350DN User Manual

							C7350/7550 User’s Guide: Setting Up   •  81
  Media Menu  
The default settings are bold.
ItemValueDescription
MP TRAY
PAPER SIZEA4; A5; A6; B5; 
Legal 14; Legal 
13.5; Legal 13; 
Letter; Executive; 
Custom; Com-9 
envelope; Com-10 
envelope; Monarch 
envelope; 
DL Envelope; 
C5 EnvelopeSets the paper (media) size 
for the multi purpose paper 
tray.
LEF = Long Edge Feed
  
MP TRAY MEDIA 
TYPEPlain; Letterhead; 
Tr a n s p a r e n c y ;  
Labels; Bond; 
Recycled; Card 
stock; RoughSelects the paper (media) type 
for multi purpose paper tray.
 
MP TRAY 
MEDIAWEIGHT
Auto; Light; 
Medium Light; 
Medium; Medium 
Heavy; Heavy; Ultra 
HeavySets the paper (media) weight 
for the multi purpose (MP) 
paper tray. 
UNIT OF 
MEASUREinches; MillimeterSets the units of measurement 
for custom paper (media) size.  
X DIMENSION 
(INCH)3 inches to 8.5 
inches
(127 mm to 1200 
mm)
Default = 
8.5 
inches (279.4 
mm)
Sets the width of custom 
paper (media). 
To use this setting, the MP 
Tray Paper Size setting must 
be set to Custom.  
Y DIMENSION 
(INCH)5 inches to 35.5 
inches
Default = 
11 
inches
Sets the length of custom 
paper (media). 
To use this setting, the MP 
Tray Paper Size setting must 
be set to Custom.  
Downloaded From ManualsPrinter.com Manuals 
						

							C7350/7550 User’s Guide: Setting Up   •  82
  
 Color Menu 
The default settings are bold.
ItemValueDescription
AUTO DENSITY 
MODEAuto; Manual.Select whether density 
adjustment and Toner 
Reproduction Curve (TRC) 
compensation is automatic.
Auto
: Density adjustment is 
automatically run under 
specified conditions, and 
reflected in the TRC 
compensation.
Manual
: Density adjustment is 
done manually (see “Adjust the 
Color Intensity (Color Tuning)” 
on page 65). 
ADJUST 
DENSITYExecuteIf EXECUTE is selected, the 
printer immediately adjusts 
density and reflects it in the 
Toner Reproduction Curve (TRC) 
compensation. 
Perform when the printer is idle. 
May not work if the printer is not 
idle. 
COLOR TUNINGPrint pattern Ordinarily, you do not use Color 
Tuning, because TRC is 
automatically adjusted.
If you want to manually adjust 
the Toner Reproduction Curve 
(TRC), use Color Tuning to print 
the test pattern.
Change the settings for the 
HIGHLIGHT, MID-TONE, and 
DARK for each color (CMYK). 
Keep changing the settings until 
you obtain your desired print 
quality.
See “Adjust the Color Intensity 
(Color Tuning)” on page 65.  
Downloaded From ManualsPrinter.com Manuals 
						

							C7350/7550 User’s Guide: Setting Up   •  83
CYAN, 
MAGENTA, 
YELLOW OR 
BLACK 
HIGHLIGHT0+1+2+3-3-2-1Adjusts HIGHLIGHT (light area) 
of Cyan, Magenta, Yellow or 
Black Toner Reproduction Curve 
(TRC).
Plus = darker
Minus = lighter
See “Adjust the Color Intensity 
(Color Tuning)” on page 65. 
CYAN, 
MAGENTA, 
YELLOW OR 
BLACK MID-
TONE
0+1+2+3-3-2-1Adjusts MID-TONE of Cyan, 
Magenta, Yellow or Black Toner 
Reproduction Curve (TRC).
Plus = darker
Minus = lighter
See “Adjust the Color Intensity 
(Color Tuning)” on page 65. 
CYAN, 
MAGENTA, 
YELLOW OR 
BLACK DARK0+1+2+3-3-2-1Adjusts DARK of Cyan, Magenta, 
Yellow or Black Toner 
Reproduction Curve (TRC).
Plus = darker
Minus = lighter
See “Adjust the Color Intensity 
(Color Tuning)” on page 65. 
CYAN, 
MAGENTA, 
YELLOW OR 
BLACK 
DARKNESS
0+1+2+3-4-3-2-
1Adjusts Cyan, Magenta, Yellow 
or Black engine density.
The Darkness settings for each 
color are reflected as offset 
values (additions) to the 
corrections through the Adjust 
Density/Toner Reproduction 
Curve (TRC) Compensation 
function. 
ADJUST 
REGISTRATIONExecuteExecute: the printer performs 
an Auto Adjust Registration.
Perform when the printer is idle. 
May not work if the printer is not 
idle.  
 Color Menu 
The default settings are bold.
ItemValueDescription
Downloaded From ManualsPrinter.com Manuals 
						

							C7350/7550 User’s Guide: Setting Up   •  84 CYAN 
REGISTRATION - 
FINE ADJUST-3, -2, -1, 
0, +1, 
+2, +3Use this to correct color 
misalignment when printing.
Adjusts the image registration 
of Cyan, Magenta or Yellow 
(CMY) relative to Black (K).  
Adjustments are made in 
increments of 1/1200th of an 
inch (21.17 microns). 
If you change the current 
setting to a more positive value, 
the value increases.  Color 
registration moves DOWN the 
page, in the opposite direction 
to the printing paper feed 
movement. 
If you change the current 
setting to a more negative 
value, the value decreases.  
Color registration moves UP the 
page, in the same direction to 
the printing paper feed 
movement.
The adjustment is shown as an 
offset value for the color 
registration settings measured 
by the printer during Auto Color 
Registration.
 
MAGENTA 
REGISTRATION - 
FINE ADJUST-3, -2, -1, 0, +1, 
+2, +3
YE L L O W  
REGISTRATION - 
FINE ADJUST-3, -2, -1, 0, +1, 
+2, +3
INK SIMULATIONOff; SWOPThe printer has its own process 
simulation generator, which 
simulates standard colors in the 
printer.
PostScript only.  
INK LIMIT
Dark; Medium; 
LightSets the thickness of the toner 
layer.
If paper curls when using DARK, 
select MEDIUM or LIGHT.  This 
should help reduce the curling. 
 Color Menu 
The default settings are bold.
ItemValueDescription
Downloaded From ManualsPrinter.com Manuals 
						

							C7350/7550 User’s Guide: Setting Up   •  85
CMY 100% 
DENSITYDisable; enableNormally, you won’t change this 
setting.
In normal printing, Color 
Matching controls the TRC 
values. In turn, the TRC values  
control the print density
ENABLE = 100% CMY density 
output [relative to the Toner 
Reproduction Curve (TRC)]
CMY 100% Density is only used 
in very special instances.  
Example:  Specify the color for 
CMYK color space in PS. 
 Color Menu 
The default settings are bold.
ItemValueDescription
Downloaded From ManualsPrinter.com Manuals 
						

							C7350/7550 User’s Guide: Setting Up   •  86
 
 System Configuration Menu 
The default settings are bold.
ItemValueDescription
POWER SAVE 
DELAY TIME5 min; 15 min; 30 
min; 60 min; 240 
minSets the time the printer 
“waits” before entering power 
save mode
See page 45. 
PERSONALITYAuto 
emulation
; PCL; 
IBM PPR III XL; 
Epson FX; 
AdobePostScrip
Selects the printer emulation 
language. 
The only printer languages that 
can be selected are those 
enabled through the  
Personality item of the service-
only Maintenance Menu. The 
Maintenance Menu is only 
accessed by Authorized Service 
Technicians. 
USB 
PS-PROTOCOLASCII
RAW
Specifies PostScript (PS) 
communication protocol mode 
of data from USB. 
In RAW mode, Ctrl-T is invalid. 
NETWORK
PS PROTOCOLASCII
RAW
Specifies PostScript (PS) 
communication protocol mode 
of data from the network print 
server.
In RAW mode, Ctrl-T is invalid.  
CLEARABLE
WARNING
ON; JobPCL: Controls how error 
messages are displayed.
On = press SELECT to display 
the error. 
Job = the error remains 
displayed until the next print 
job is received.
PostScript (PS): Error 
messages are only shown 
during the print job, regardless 
of setting. 
AUTO 
CONTINUEOn; OffON = printer recovers 
automatically after a memory 
overflow or print overrun. 
MANUAL 
TIMEOUT
60 sec; 30 sec; 
OffThis is the time the printer  
“waits” to cancel a print job 
when paper is not inserted after 
a request for paper is issued.
PostScript (PS) only. 
Downloaded From ManualsPrinter.com Manuals 
						

							C7350/7550 User’s Guide: Setting Up   •  87
WAIT TIMEOUTOff; 5 sec to 300 
sec; default = 
40 
sec
PCL:  Wait Timeout is the length 
of time the printer “waits” 
before automatically printing 
and ejecting received data 
when no end page code or data 
end code is received
PostScript: The job is cancelled, 
regardless of the setting.  
LOW TONER
Continue; StopWhen LOW TONER displays, 
CONTINUE: printing continues  
STOP: printing stops.  The 
printer goes offline.  
JAM RECOVERYON; OFFDetermines whether or not 
printing continues after a paper 
jam has been cleared. 
OFF:  Cancels  (after the paper 
jam is cleared) the print job 
being printed when the paper 
jam occurred.
ON:  Continues (after the paper 
jam is cleared) the print job 
being printed when the paper 
jam occurred. 
ERROR REPORTON; 
OffON:  Error Report prints when 
internal error occurs.
PostScript only.  
LANGUAGEEnglish; German; 
French; Italian; 
Spanish; Swedish; 
Norwegian; 
Danish; Dutch; 
Tu r k i s h ;  
Portuguese; PolishSelects the language of the 
printer display.
 
 System Configuration Menu 
The default settings are bold.
ItemValueDescription
Downloaded From ManualsPrinter.com Manuals 
						

							C7350/7550 User’s Guide: Setting Up   •  88
 
 PCL Emulation Menu 
The default settings are bold.
ItemValueDescription
FONT SOURCEResident; DIMM0; 
DownloadedSelects the location of the PCL 
fonts.
DIMM0
 Only displays if the 
font DIMM ROM is installed.
Downloaded
 displays only if 
fonts have been downloaded 
to the printer.  
FONT NO.I000, C001, S001Sets the PCL font number.
I = internal (resident font); 
I000 = Courier. 
C = Font stored in the 
printers Flash memory. 
S = downloaded soft font, 
stored on the printers 
internal hard disk drive. Only 
applies if the printer has a 
hard disk drive installed.
 
FONT PITCH0.44 cpi to 99.99 cpi in 
0.01 cpi increments
Default = 
10.00 cpi
Sets the font width in 
characters per inch. Only 
displays if the font is a fixed-
space outline font. 
FONT HEIGHT4.00 to 999.75 point, in 
0.25 point increments
Default = 
12.00 point
Sets the font point size. 
Only applies only to fixed 
fonts Does not apply to 
proportional fonts.  
Downloaded From ManualsPrinter.com Manuals 
						

							C7350/7550 User’s Guide: Setting Up   •  89 SYMBOL SET
PC-8, PC-8 Dan/Nor, 
PC-8 TK, PC-775, 
PC-850, PC-852, PC-855, 
PC-857 TK, PC-858, 
PC-866, PC-869, 
PC-1004, Pi Font, Plska 
Mazvia, PS  Math, PS Text, 
Roman-8, Roman-9, 
Roman Ext, 
Serbo Croat1, Serbo 
Croat2, Spanish, 
Ukrainian, VN Intl, VN 
Math, VN US, Win 3.0, 
Win 3.1 Blt, Win 3.1 Cyr, 
Win 3.1 Grk, Win 3.1 
Heb, Win 3.1 L1, Win 3.1 
L2, Win 3.1 L5, 
Wingdings, Dingbats MS, 
Symbol, OCR-A, OCR-B, 
HP ZIP, USPSFIM, 
USPSSTP, USPSZIP,  
Bulgarian, CWI Hung, 
DeskTop, German, 
Greek-437, Greek-437 
Cy, Greek-928, Hebrew 
NC, Hebrew OC, 
IBM-437, IBM-850, 
IBM-860, IBM-863, 
IBM-865, ISO  Dutch, ISO 
L1, ISO L2, ISO L5, ISO 
L6, ISO L9, 
ISO Swedish1, 
ISO Swedish2, 
ISO Swedish3, ISO-2 
IRV, ISO-4 UK, ISO-6 
ASC, ISO-10 S/F, ISO-11 
Swe, ISO-14 JASC, 
ISO-15 Ita, ISO-16 Por, 
ISO-17 Spa, ISO-21 Ger, 
ISO-25 Fre, ISO-57 Chi, 
ISO-60 Nor, ISO-61 Nor, 
ISO-69 Fre, ISO-84 Por, 
ISO-85 Spa, Kamenicky, 
Legal, Math-8, MC Text, 
MS Publish, PC Ext D/N, 
PC Ext US, PC Set1, PC 
Set2 D/N, PC Set2 USSelects a PCL character 
symbol set  
 PCL Emulation Menu 
The default settings are bold.
ItemValueDescription
Downloaded From ManualsPrinter.com Manuals 
						

							C7350/7550 User’s Guide: Setting Up   •  90
A4 PRINT 
WIDTH78 column; 80 columnIf you are printing a letter 
size document on an A4 size 
sheet, select 80 column. 
This condenses the print to fit 
on the slightly narrower A4 
sheet, without changing the 
line breaks.
  
White page 
skip
OFF; ONPCL only
ON: blank pages do not print 
CR functionCR; CR+LFPCL only
When the printer receives a 
CR code:
CR:  carriage return 
performed
CR+FL  carriage return with 
line feed performed. 
LF function
LF; LF+CRPCL only
When the printer receives a 
LF code:
LF:  line feed performed
LF+CR:  line feed with 
carriage return performed.  
Print marginNormal; 1/5 inch; 1/6 
inchSets unprintable paper area 
(margin).
Normal: PCL emulation 
compatible
1/5 inch: domestic model 
emulation.
1/6 inch: HIPER-W emulation.  
Tr u e  B l a c k
OFF; ONPCL only
Determines whether to use 
Composite Black (CMYK 
mixed) or True Black (K only) 
for the black (100%) in image 
data.
OFF =  Composite (CMYK) 
Black. Provides best results 
when printing photographs.
ON = Pure Black (black toner 
only). Provides best results 
when printing a combination 
of text and graphics.
See page 31. 
 PCL Emulation Menu 
The default settings are bold.
ItemValueDescription
Downloaded From ManualsPrinter.com Manuals