Home > Oki > Printer > OKI C7350DN User Manual

OKI C7350DN User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual OKI C7350DN User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 103 Oki manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    Page
    of 719
    							C7350/7550 User’s Guide: Setting Up   •  101
     
     USB Menu 
    The default settings are bold.
    ItemValueDescription
    USBEnable; DisableEnable: Activates the USB 
    interface. 
    SOFT RESETEnable; DisableEnable:
    With Soft Reset, a software 
    string (not a hardware function) 
    can be sent to the USB port to 
    flush all USB buffers and reset 
    all USB pipes to defaults.
    This reset DOES NOT change 
    the USB addressing or USB 
    configuration. 
    OFFLINE 
    RECEIVEEnable; 
    DisableWhen set to Enable
    The printer receives data even 
    if:
    • an alarm/error occurs. 
    • the online button is pressed.
    The printer issues a BUSY signal 
    only:
    • when the receive buffer is full.
    • when a service call occurs.  
    Downloaded From ManualsPrinter.com Manuals 
    						
    							C7350/7550 User’s Guide: Setting Up   •  102
     
     Network Menu 
    Only appears if the network card is installed.
    The default settings are bold.
    ItemValueDescription
    TCP/IPEnable; DisableEnable: Selects TCP/IP protocol.
      
    NETWAREEnable; DisableEnable: Selects Netware 
    protocol.
      
    ETHERTALK
    Enable; DisableEnable: Selects EtherTalk 
    protocol.
      
    NETBEUIEnable; DisableEnable: Selects NetBEUI 
    protocol.
      
    FRAME TYPE
    Auto; 802.2; 
    802.3 Ether-II; 
    SnapEnable: Selects the Ethernet 
    frame type. 
    DHCP/BOOTPEnable; DisableEnable:  DHCP/BOOTP is 
    selected automatically.  
    RARPEnable; 
    DisableEnable:  RARP is selected 
    automatically. 
    IP ADDRESSxxx.xxx.xxx.xxx
      Configures IP address.  
    Uses 12 alphanumeric 
    characters.
    SUBNET MASKxxx.xxx.xxx.xxx
     Configures subnet mask.
    Uses 12 alphanumeric 
    characters. 
    GATEWAY 
    ADDRESSxxx.xxx.xxx.xxx
      Configures gateway address
    Uses 12 alphanumeric 
    characters. 
    PRINT 
    SETTINGSON; 
    OFFON = When the printer exits 
    Menu Mode, the Network 
    MenuMap prints. The Network 
    MenuMap shows the results of 
    self-diagnosis tests and the 
    current network printer settings.
     
    INITIALIZEON; OFFON = When the printer exits 
    Menu Mode, the network 
    initializes. 
    Downloaded From ManualsPrinter.com Manuals 
    						
    							C7350/7550 User’s Guide: Setting Up   •  103
      
     Memory Menu  
     The default settings are bold.
    ItemValueDescription
    RECEIVE BUFF 
    SIZEAuto; OFF; 0.5 
    MB; 1 MB; 2 MB; 
    4 MB; 8 MB; 16 
    MB; 32 MBSets the size of the receive 
    buffer. Depends on the amount 
    of memory installed in the 
    printer.  
    RESOURCE 
    SAVEAUTO; Off; 0.5 
    MB; 1 MB; 2 MB; 
    4 MB; 8 MB; 16 
    MB; 32 MBSet the size of the font cache 
    area.
    Depends on the amount of 
    memory installed in the printer.  
    FLASH 
    INITIALIZEExecute Ordinarily, you should not use 
    this.
    Initializes flash memory (if 
    installed)
     
    PS FLASH 
    RESIZE0% [n.n MB] TO 
    90% [n.n MB], in 
    10% incrementsOrdinarily, you should not use 
    this.
    Changes the size of the flash 
    memory area.
     “n.n” indicates the actual size 
    in MB.
    You cannot specify 100%, 
    because special data is stored in 
    the Flash Memory.  
    Downloaded From ManualsPrinter.com Manuals 
    						
    							C7350/7550 User’s Guide: Setting Up   •  104
    Disk Maintenance Menu
      
     
    CAUTION!
    Unless you know what you are doing, do not use this 
    Menu!
    The System Administrator (or someone who is 
    knowledgeable in this area) should use the Storage 
    Device Manager software to perform disk maintenance.
    Use the Disk Maintenance Menu to: 
    • initialize the printers internal hard disk drive, 
    • reassign the partition contents, and
    • reformat the partitions.  
     Disk Maintenance Menu 
    Only appears if the hard disk drive is installed.
    The default settings are bold.
    ItemValueDescription
    HDD INITIALIZEEXECUTE Partitions the hard disk and 
    formats each partition.  
    PARTITION SIZEnnn% / mmm% / 
    xxx%Sets usage of hard disk drive 
    partitions:
    nnn = Common
    mmm = PCL
    xxx = PS
    Range for each partition: 1 to 
    98% in 1% increments.
    nnn + mmm + xxx = 100%. 
    HDD 
    FORMATTING
    PCL, COMMON, 
    PSFormats specified partition.  
    Downloaded From ManualsPrinter.com Manuals 
    						
    							C7350/7550 User’s Guide: Setting Up   •  105
      
     System Adjust Menu 
    The default settings are bold.
    ItemValueDescription
    X ADJUST0.00 mm;
    Range +0.25 TO 
    +2.0 MM and – 2.0 
    TO –0.25 MM in 
    0.25 mm 
    incrementsHorizontal adjustment of the 
    overall print position, in 0.25 
    mm increments.  
    Y ADJUST0.00 mm;
    Range +0.25 TO 
    +2.0 MM and – 2.0 
    TO –0.25 MM in 
    0.25 mm 
    incrementsVertical adjustment of the 
    overall print position, in 0.25 
    mm increments. 
      
    DUPLEX X ADJUST
    0.00 mm;
    Range +0.25 TO 
    +2.0 MM and – 2.0 
    TO –0.25 MM in 
    0.25 mm 
    incrementsHorizontal adjustment of the 
    overall print position of the 
    back (verso/second) page, in 
    0.25 mm increments.
      
    DUPLEX Y ADJUST0.00 mm;
    Range +0.25 TO 
    +2.0 MM and – 2.0 
    TO –0.25 MM in 
    0.25 mm 
    incrementsVertical adjustment of the 
    overall print position of the 
    back (verso/second) page, in 
    0.25 mm increments.
     
    TR A Y  1  L E G A L  1 4
    Legal 14; Legal 
    13.5Sets Tray 1 legal paper size.
     
    TR A Y  2  L E G A L  1 4Legal 14; Legal 
    13.5Sets Tray 2 legal paper size.
      
    TR A Y  3  L E G A L  1 4
    Legal 14; Legal 
    13.5Sets Tray 3 legal paper size.
      
    Downloaded From ManualsPrinter.com Manuals 
    						
    							C7350/7550 User’s Guide: Setting Up   •  106
      
     System Adjust Menu 
    The default settings are bold.
    ItemValueDescription
    PCL TRAY 2 ID#1 to 59; default = 5
    Sets Tray 2 number for PCL 
    emulation.  
    PCL TRAY 3 ID#1 – 59; default = 
    20
    Sets Tray 3 number for PCL 
    emulation.  
    PCL MP TRAY ID#1 – 59; default = 
    4Sets MP Tray number for PCL 
    emulation.  
    DRUM CLEANINGOFF; ONON:  The printer cleans the 
    drum before printing.  
    Drum cleaning can help 
    prevent unwanted horizontal 
    white lines. Drum cleaning 
    shortens image drum life.  
    HEX DUMPExecute Press SELECT to place the 
    printer in Hexadecimal (Hex) 
    Dump Mode.
    In Hex Dump Mode, all 
    received data is printed in 
    both Hexadecimal and ASCII 
    format. This information is 
    often used when 
    troubleshooting printer 
    problems.
    To return to normal print 
    mode, turn off  the printer, 
    then turn it on.
      
    Downloaded From ManualsPrinter.com Manuals 
    						
    							C7350/7550 User’s Guide: Setting Up   •  107
     
     Maintenance Menu 
    The default settings are bold.
    ItemValueDescription
    EEPROM RESETExecute Resets all User Menu settings 
    to factory defaults.
    All user defined (customized) 
    settings are lost.  
    SAVE MENUExecuteSaves the current printer 
    (menu) settings. 
    RESTORE MENUExecute Restore Menu is not the same 
    as Reset to Factory defaults.
    Restore Menu resets the menu 
    to the last saved set of 
    customized (user defined) 
    settings.
    If the settings have not been 
    changed from the factory 
    defaults, Restore Menu cannot 
    be accessed.  
    POWER SAVEEnable; DisableWhen no input is received for 
    a specified time, the printer 
    enters Power Save Mode. 
    See “POWER SAVE Mode” on 
    page 45.
    See also “Power Save Delay 
    Time” under the System 
    Configuration Menu on 
    page 86. 
    PAPER BLACK 
    SETTING –2; –1; 
    0; +1; 
    +2Not normally used.
    PAPER COLOR 
    SETTING –2; –1; 0; +1; 
    +2Not normally used.
    TRANSPR BLACK 
    SETTING –2; –1; 
    0; +1; 
    +2Not normally used.
    TRANSPR COLOR 
    SETTING –2; –1; 0; +1; 
    +2Not normally used.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							C7350/7550 User’s Guide: Setting Up   •  108
     
     Usage Menu 
    ItemValueDescription
    TO T A L  P A G E  
    COUNT nnnnnn Shows total number of pages 
    printed.
    TR A Y  1  P A G E  
    COUNT  nnnnnnShows number of pages printed from 
    Tr a y  1 .
    TR A Y  2  P A G E  
    COUNT  nnnnnn Shows number of pages printed from 
    Tray 2. Displayed if optional Tray 2 is 
    installed.
    TR A Y  3  P A G E  
    COUNT nnnnnnShows number of pages printed from 
    Tray 3. Displayed if optional Tray 3 is 
    installed.
    MP TRAY PAGE 
    COUNT nnnnnn Shows number of pages printed from 
    Multi purpose Paper Tray.
    COLOR PAGE 
    COUNT nnnnnnNumber of pages printed in color.
    MONOCHROME 
    PAGE COUNT nnnnnn Number of pages printed in 
    monochrome.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							C7350/7550 User’s Guide: Setting Up   •  109
      
     Usage Menu 
    ItemValueDescription
    BLACK DRUM 
    LIFE
      Remaining 
    nnn%Displays the remaining life of the 
    black image drum (as a percentage).
    CYAN DRUM LIFE
     Remaining 
    nnn%Displays the remaining life of the 
    cyan image drum (as a percentage).
    MAGENTA DRUM 
    LIFE
     Remaining 
    nnn%Displays the remaining life of the 
    magenta image drum (as a 
    percentage).
    YELLOW DRUM 
    LIFE
     Remaining 
    nnn%Displays the remaining life of the 
    yellow image drum (as a 
    percentage).
    BELT LIFE
      Remaining 
    nnn%Displays the remaining life of the belt 
    (as a percentage).
    FUSER LIFE
      Remaining 
    nnn%Displays the remaining life of the 
    fuser roller (as a percentage).
    BLACK TONER
      15K = xxx%
    5K =yyy%Displays the remaining life of the 
    black toner (as a percentage).
    CYAN TONER
      15K = xxx%; 
    5K = yyy%Displays the remaining life of the 
    cyan toner (as a percentage).
    MAGENTA TONER
      15K = xxx%
    5K = yyy%Displays the remaining life of the 
    magenta toner (as a percentage).
    YE L L O W  T O N E R
      15K = xxx%
    5K = yyy%Displays the remaining life of the 
    yellow toner (as a percentage).
    Downloaded From ManualsPrinter.com Manuals 
    						
    							C7350/7550 User’s Guide: Windows XP Printer Drivers  •  110
    Windows XP
    Printer Drivers
    See your printed Software Installation Guide for information on 
    installing printer drivers.
    You can also go to http://my.okidata.com to view and/or 
    download a copy of the Software Installation Guide or for the latest 
    information on drivers for your printer.
    Which Printer Driver to Use?  
    Your printer comes with Windows drivers for PCL and Adobe® 
    PostScript® (PS). You can install either of these, or both if you 
    wish. Which driver you choose depends on your application.
    •If you use TrueType fonts and you do not print PostScript 
    (including “.eps” files) graphics, choose the PCL driver. This is 
    more efficient and gives good results. 
    •If you use PostScript fonts or print PostScript graphics, choose 
    the PostScript driver. In this situation, performance is faster and 
    graphics are printed at their best quality.
      
    If neither driver seems to cover all your needs, you should install 
    both drivers.  Select the same printer port (LPT1 or Network Port) 
    for both drivers during the installation.
    Set the driver you plan to use most of the time to be your Windows 
    default driver. Most applications allow you to choose a different 
    printer from within the print dialog, so you can use the alternative 
    driver for printing whenever you need to. 
    NOTE
    The line art graphics in this manual are PostScript. 
    If you plan to print parts of this manual, choose the 
    PostScript driver. Otherwise, the line art graphics print 
    at low resolution.  The print quality may not be 
    satisfactory.
    Downloaded From ManualsPrinter.com Manuals 
    						
    All Oki manuals Comments (0)

    Related Manuals for OKI C7350DN User Manual