Nortel Modular Ics Companion Installer Guide

Programming / 65
P0992639 01 Modular ICS Companion Installer Guide
Cells
Cell programming allows you to examine the cell radio and 
cell neighbor configuration. Choose the cell you want to 
examine by pressing ≠ and the cell number (01 to 32) 
or select LIST
 to see all in sequence. When in the list mode, 
there is a softkey that allows you to FIND
 a specific cell 
number.
From a specific cell number, select ≠ to see all Cell 
radios, Cell neighbors and Cell radio neighbors.
Cell radios
This sub-heading...

66 / Programming
Modular ICS Companion Installer Guide P0992639 01
Cell rad nghbrs
This sub-heading allows you to view the two-digit number of 
any cells that border a particular cell in a system, these are 
called cell neighbors. As well, you can view any cells that 
border the cell neighbors. Press ≠ and enter the cell 
number to see the settings: Assigned or Unassigned. Select 
LIST
 to see each neighbor in sequence. Select SCAN to see the 
first/next cell Assigned.
For example cell 01, the display...

Programming / 67
P0992639 01 Modular ICS Companion Installer Guide
There are only two reasons to modify the system LID.
The site has multiple systems, and you want users to be 
able to move from system to system without changing slots 
on their portable telephones. All systems must be set to the 
same system LID.
Two systems that are located near each other were 
accidentally assigned the same system LID. Users of one 
system can access the other system. 
Note: This highly unlikely situation could...

68 / Programming
Modular ICS Companion Installer Guide P0992639 01
The Software keys can be obtained and entered using the 
following steps.
Step 1: Obtain the Companion ID
The Companion ID Label is sent to each customer once radio 
credits have been purchased. In order to implement the credits 
and take advantage of the Norstar Companion capability, you 
must obtain two sets of keys. One is the Credit Key and the 
other is the UTAM Activation Key. The keys are available by 
calling the Nortel Customer...

Programming / 69
P0992639 01 Modular ICS Companion Installer Guide
Step 2: Obtain the System Identification Number
Obtain the System ID (SysID) by pressing 
²¥¥êçêéë, or ²¥¥àáàÝÜ 
on any programming set.
This information is also available by accessing Software 
keys in an Installer programming session:
1. Place the programming overlay on an M7310, M7324, or 
T7316 telephone.
2. Press ²¥¥‚¯öìéí. The display reads  
Password:.
3. Enter the most recent Installer password. The display reads...

70 / Programming
Modular ICS Companion Installer Guide P0992639 01
3. Indicate the number of radio credits you require. You need 
two credits for every base station in your system.
4. You are given two keys, the UTAM Activation Key and 
the Credit Key. The keys consist of three separate numeric 
strings that contain eight digits each.
UTAM Activation Key
This key activates wireless capability for a new system or a 
system upgrade which involves base stations. The software 
recognizes base station radios...

Programming / 71
P0992639 01 Modular ICS Companion Installer Guide
3. Press ≠. The display reads Key 1:_.
4. Enter the 8 digit password number for Key 1. Use BKSP
 to 
make corrections. The display reads Key 2:_. 
5. Enter the eight-digit password number for Key 2. Proceed 
as above until you have finished entering Key 3. The 
display reads Entry successful.
6. Repeat steps 3 through 5 for the other key.
7. Press– until the display reads Software keys or 
¨ to exit.
The system automatically starts...

72 / Programming
Modular ICS Companion Installer Guide P0992639 01
Register your Companion portables
Norstar Companion Portable telephones are added to the 
system using the portable registration process. Refer to the 
Modular ICS Companion System Coordinator Guide for more 
information on registering Companion portables. 
Tip - If your system has been powered down for an 
extended period of time your System ID may have 
changed. Contact the Nortel Networks Customer 
Response Center to obtain a UTAM...

P0992639 01 Modular ICS Companion Installer Guide
Registering individual portables
Registering the C3060
The following section describes the procedures involved in 
registering Companion C3060 portable telephones. To register 
each portable with the Norstar system, you must do two things:
Register the portables by entering the Registration 
password on each one.
Verify that the portable functions correctly.
C3060 Icons
The following table identifies the C3060 portable telephone 
icons:
C3060 Icon...

74 / Registering individual portables
Modular ICS Companion Installer Guide P0992639 01
To register the C3060
1. Turn on registration for your system.
2. Press m ***. The display shows ADMINISTRATION 
and three softkeys,SYS
, PINFO, DATA.
3. Press SYS
. The display shows WIRELESS SYSTEMS.
Note:  Wireless Systems is a registration list of names for up 
to six different systems. If the list is full, and you must 
add another system, de-register an existing system 
name.
4. Press ADD
 to establish a radio...