Nortel Modular Ics Companion Installer Guide

Troubleshooting / 105
P0992639 01 Modular ICS Companion Installer Guide
Radio cred 
req’dToo many base 
stations have been 
connected to the 
system. This message 
appears only after a 
restart.Too many base stations have been 
connected and the total available 
Radio Credits are insufficient to 
accommodate all the radios. 
Wireless communication remains 
disabled. System Reevaluation may 
be disabled.
1.  Verify the total and available 
number of radio credits. See 
Verifying Radio Credits (U.S. only)...

106 / Troubleshooting
Modular ICS Companion Installer Guide P0992639 01
Event messages
Event message displayCause
(U.S. only) Unable to activate all registered 
portables. The system ran out of portable 
credits. One event is generated per portable 
that failed to activate. The repetition of the 
corresponding alarm code 59 indicates how 
many additional credits must be purchased.
The base station (on port 0103 in this case) 
cannot successfully receive the data image.
Both radios belonging to the base...

Troubleshooting / 107
P0992639 01 Modular ICS Companion Installer Guide
A B2 channel radio (radio 2 on port 0103 in this 
case) cannot be synchronized because the B1 
radio was disabled in maintenance.
Both radios belonging to the base station (on 
port 0103 in this case) are disabled. The B1 
radio must be operational to synchronize both 
radios of the base station with other radios in 
the system. Two events are raised: one for the 
B1 channel radio and another for the B2 
channel radio. A...

108 / Troubleshooting
Modular ICS Companion Installer Guide P0992639 01
There is a bad signature.
(U.S. only) there are insufficient radio credits.
(U.S. only) radio credits decreased.
(U.S. only) UTAM keys are required.
(U.S. only) UTAM test failed.
Evaluation override is finished.
Disablement test is active.
Disablement test is finished.
System initialization is beginning.
System initialization is finished.
Demo system.
Software error dealing with base station.
System problem with locating portable...

Troubleshooting / 109
P0992639 01 Modular ICS Companion Installer Guide
The radio driver software which directly 
controls the base stations’ device has 
experienced an internal error.
System problem with locating portable 
telephones.
Wireless system access error.
Wireless system access error.
Trying to register an incompatible wireless 
device.
Wireless system software error in dealing with 
a portable telephone.
Wireless system software error.
Portable does not support specific display 
character....

110 / Troubleshooting
Modular ICS Companion Installer Guide P0992639 01
The Data Transfer server has been told by the 
base station that an error has occurred.
The Data Transfer server has been told by the 
base station that an error has occurred.
Invalid event for Data Transfer.
Internal wireless subsystem software error.
Internal wireless subsystem locator error.
All possible wireless telephone numbers have 
been registered to portable telephones. No 
directory number is available to handle the...

Troubleshooting / 111
P0992639 01 Modular ICS Companion Installer Guide
Wireless subsystem Common Signaling 
Channel server software error.
Wireless auto-admin (Re-Eval) subsystem 
detected that a data re-evaluation is required.
Wireless data re-evaluation has started.
Wireless data re-evaluation has completed.
Wireless auto-admin (Re-Eval) indicating that a 
configured cell failed to come on-line. Alarm 23 
displays cell that failed.
The Wireless auto-admin (Re-Eval) subsystem 
has detected an error....

112 / Troubleshooting
Modular ICS Companion Installer Guide P0992639 01 

P0992639 01 Modular ICS Companion Installer Guide
Specifications
This chapter provides the specifications for Companion 
equipment.
Norstar Companion system components
Remote Power Interconnect
The Remote Power Interconnect (RPI) device power lines are 
protected by 3 A, 250 V anti-surge fuses. Each output has 
short-circuit protection. The length of the cord, from the 
outside surface of the unit to the plug, should be a minimum of 
1.4 m (4.5 ft.) and a maximum of 4.2 m (15 ft.).
Part no.RPI-8:...

114 / Specifications
Modular ICS Companion Installer Guide P0992639 01
Base station
The base station consists of two printed circuit boards: the 
Line Interface Module (LIM) and the Dual Radio Interface 
Module (RIM). The base station provides connectors for a 
terminating line cord, external antennas, and a power supply 
cord. Only passive antennas may be connected to the antenna 
sockets on the base station.
Base station 
If a plug-top power supply is required, use only the power 
supply recommended...