Nortel Modular Ics 6.1 Programming Record Manual
Have a look at the manual Nortel Modular Ics 6.1 Programming Record Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 211 Nortel manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
73 P0603536 02 Modular ICS 6.1 Programming Record Maintenance System version (Maintenance; System version) System Version Port/DN Status SP: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device:
74 Modular ICS 6.1 Programming RecordP0603536 02 Sys test log (Maintenance; Sys test log) Sys Test Log Log item Time of log itemNumber of repetitions
75 P0603536 02 Modular ICS 6.1 Programming Record Sys Admin Log (Maintenance; Sys Admin Log) Sys Admin Log Log item Time of log itemNumber of repetitions Time and date that log was checked
76 Modular ICS 6.1 Programming RecordP0603536 02 Network evt log (Maintenance; Network evt log) Network Log Log itemTime of log item Number of repetitions Time and date that log was checked
77 P0603536 02 Modular ICS 6.1 Programming Record Template specific defaults For the Norstar MICS 6.1 system, the Square template is the default template. The Centrex, Hybrid, PBX and DID template are also available as an option at startup. For the Norstar MICS-XC 6.1 system, the PBX template is the default template. The DID template is also available as an option at startup. For information on defaults for Registration, Radio data, Radios, Cells, and the Registration password, refer to your MICS-XC Norstar-Companion Installer Guide. These settings are used with XC 6.1 systems that use Companion components. The following charts show the sections of the Programming Record where the Centrex, Hybrid, PBX and DID default values differ from the Square template default values. Terminals&Sets defaults Line Access † is a three-digit line number. The Centrex template sequentially assigns lines to DNs. It assigns Line 001 to DN221, Line 0 02 to DN 222, and so on, until all lines are assigned to DNs. The lines automatically become prime lines for the DNs. Restrictions SettingSquareCentrexHybridPBXDID Line assignmen t Set 221 Lines 001 to 002: Appear & Ring other sets Lines 001 to 002: Appear & RingSet 221 Line † Appear & Ring Set 221 Line 001: Appear & Ring other sets Line 001: Appear onlySet 221 All lines: Unassigned other sets All lines: UnassignedSet 221 All external lines: Unassigned other sets All lines: Unassigned Target lines 157-284: UnassignedTarget lines 157-284: Ring only Line pool accessPool A to O: NPool A: Y Pool B to O: N Prime lineNoneLine †I/C SettingSquareCentrexHybridPBXDID Restrn flt 01 Restr’n 01 Restr’n 02 Override 001 Override 002 Override 003 Restr’n 03 Override 001 Restr’n 04 Restr’n 05 Restr’n 06 Restr’n 07 Restr’n 08 Restr’n 09 Restr’n 10 0 1 1800 1877 1888 911 911 411 976 1976 1976 1900 1900 555121290 91 91800 91877 91888 9911 9911 9411 9976 91976 91976 91900 91900 955512120 1 1800 1877 1888 911 911 411 976 1976 1976 1900 1900 5551212
78 Modular ICS 6.1 Programming RecordP0603536 02 Telco features (Feature assignmnt) Lines defaults Trunk/Line data (Target lines) Trunk/Line data (Digital and Analog loopstart) SettingSquareCentrexHybridPBXDID Call log setNYSet 221: Y other sets: NNdefault target line: Y other lines: N Extl VMsg setNdefault target line: Y other lines: N SettingSquareCentrexHybridPBXDID Rec’d #:NoneDN of the set it appears on SettingSquareCentrexHybridPBXDID Line type PublicLines Pool 001 to 030: Pool A 031 to 060: Pool B 061 to 068: Pool C 069 to 076: Pool D 077 to 084: Pool E 085 to 092: Pool F 093 to 0100: Pool G 101 to 108: Pool H 109 to 112: Pool I 113 to 116: Pool J 117 to 120: Pool K 121 to 124: Pool L 125 to 128: Pool M 129 to 132: Pool N 133 to 136: Pool O 137 to 140: Public 141 to 144: Public 145 to 336 : PublicLines Pool 001 to 030: Pool A 031 to 060: Public 061 to 336: Public
79 P0603536 02 Modular ICS 6.1 Programming Record Trunk/Line data (Digital and Analog Groundstart) Trunk/Line data (Digital and E&M lines) SettingSquareCentrexHybridPBXDID Line type PublicLines Pool 001 to 030: Pool A 031 to 060: Pool B 061 to 068: Pool C 069 to 076: Pool D 077 to 084: Pool E 085 to 092: Pool F 093 to 0100: Pool G 101 to 108: Pool H 109 to 112: Pool I 113 to 116: Pool J 117 to 120: Pool K 121 to 124: Pool L 125 to 128: Pool M 129 to 132: Pool N 133 to 136: Pool O 137 to 140: Public 141 to 144: Public 145 to 336 : PublicLines Pool 001 to 030: Pool A 031 to 060: Public 061 to 336: Public SettingSquareCentrexHybridPBXDID Line typePublicLines Pool 001 to 030: Pool A 031 to 060: Pool B 061 to 068: Pool C 069 to 076: Pool D 077 to 084: Pool E 085 to 092: Pool F 093 to 0100: Pool G 101 to 108: Pool H 109 to 112: Pool I 113 to 116: Pool J 117 to 120: Pool K 121 to 124: Pool L 125 to 128: Pool M 129 to 132: Pool N 133 to 136: Pool O 137 to 140: Public 141 to 144: Public 145 to 336 : PublicLines Pool 001 to 030: Pool A 031 to 060: Public 061 to 336: Public
80 Modular ICS 6.1 Programming RecordP0603536 02 Trunk/Line data (Digital and Analog DID) Trunk/Line data (BRI-2, BRI-ST, BRI-U2 and BRI-U4 lines) SettingSquareCentrexHybridPBXDID Line type PublicLines Pool 001 to 030: Pool A 031 to 060: Pool B 061 to 068: Pool C 069 to 076: Pool D 077 to 084: Pool E 085 to 092: Pool F 093 to 0100: Pool G 101 to 108: Pool H 109 to 112: Pool I 113 to 116: Pool J 117 to 120: Pool K 121 to 124: Pool L 125 to 128: Pool M 129 to 132: Pool N 133 to 136: Pool O 137 to 140: Public 141 to 144: Public 145 to 336 : PublicLines Pool 001 to 030: Pool A 031 to 060: Public 061 to 336: Public SettingSquareCentrexHybridPBXDID Line typePublicLines Pool 001 to 030: Pool A 031 to 060: Pool B 061 to 068: Pool C 069 to 076: Pool D 077 to 084: Pool E 085 to 092: Pool F 093 to 0100: Pool G 101 to 108: Pool H 109 to 112: Pool I 113 to 116: Pool J 117 to 120: Pool K 121 to 124: Pool L 125 to 128: Pool M 129 to 132: Pool N 133 to 136: Pool O 137 to 140: Public 141 to 144: Public 145 to 336 : PublicLines Pool 001 to 030: Pool A 031 to 060: Public 061 to 336: Public
81 Modular ICS 6.1 Programming RecordP0603536 02 Restrictions Services defaults Access codes SettingSquareCentrexHybridPBXDID Restrn flt 00No restrictions (cannot be changed) Restrn flt 01 Restr’n 01 Restr’n 02 Override 001 Override 002 Override 003 Restr’n 03 Override 001 Restr’n 04 Restr’n 05 Restr’n 06 Restr’n 07 Restr’n 08 Restr’n 09 Restr’n 10 0 1 1800 1877 1888 911 911 411 976 1976 1976 1900 1900 555121290 91 91800 91877 91888 9911 9911 9411 9976 91976 91976 91900 91900 955512120 1 1800 1877 1888 911 911 411 976 1976 1976 1900 1900 5551212 SettingSquareCentrexHybridPBXDID Line pool codesNonePool A: 9 Pool B to O: None Park prefix1 Extrnl code9None
81 P0603536 02Modular ICS 6.1 Programming Record Glossary of programming headings and settings This section presents the programming hierarchy in the Norstar Modular ICS/Modular ICS-XC interface. The dots each represent a level below the top level Top LevelLevel 1 Level 2 Level 3 Below the 3rd level Menu item Description Profile (use only at system startup) Change on non-North American systems, only! Use this command to choose a profile that reflects the trunk card profile for the specific country. Use Profile password. WARNING: Never use this command after Startup has been run. Dialpad (use only at system startup) Use this command to select the dialpad layout you require. This is a system- wide setting. Use Dialpad access. Startup (use only for initial configuration at system startup) Use this command to select the default information specific to your system. Use Startup access. This command is only available immediately after startup of the KSU. Te m p l a t eSelect the template to assign the default values for the system. Start DNEnter between three and seven digits to indicate the first DN of the range you plan to use. The length of this entry also defines the default DN length and the default Received number length. Note: If the first digit of a DN is the same as any of the follow codes, the system sets these codes to None: Direct-dial digit Call Park prefix first digit of a line pool access code