Nortel Modular Ics 6.1 Programming Record Manual
Have a look at the manual Nortel Modular Ics 6.1 Programming Record Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 211 Nortel manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
3 P0603536 02 Modular ICS 6.1 Programming Record ProfilePROF 1 DialpadQ, Z:0 Startup Template Square/(XC)PBX Start DN 221 Terminals&Sets Show set:_ Line access Line assignment Show line:_(If it is a Non-DID line)L001Unassigned(If it is a DID line)L0011(If PRI)L001: PRI-A LinePool access LinePool AY(if there are PRI pools)LinePool PRI-A N Prime lineI/C Intercom keys2 Answer DNs Show set:_ 222Unassigned OLI#None OLI as calld #N Capabilities Fwd no answer Fwd to None Forward delay4 Fwd on busy Fwd to None DND on BusyN HandsfreeNone HF answerbackY Pickup grpNone Page zone1 PagingY D-DialSet 1 Priority CallN HotlineNone (if Hotline=Extrnl and number specified) Use p rim e lin e Aux. ringerN Allow redirectN Redirect ringY Intrusion Protect Lvl None ATA settings ATA ans timer7 ATA useOff site MsglndicateNone ATA dvcModem SM SupervisorN Name221 User prefernces MdlM7208 Button prgrming User speed dial (256-279) Call log opt’ns No one answered Dialing opt’ns Standard dial LanguageEnglish Display cntrst4 Ring type1 Restrictions Restrn filters Show filter: _ Restn flt 00No restrictionsRestrn flt 01 Restrn 01 Deny 0 No overrides Set restrns Filte rs Normal 02Night11Evening12Lunch13Sched 400Sched 500Sched 600Set lockNone Allow last noY Allow saved noY Allow linkY Line/set rstrns Show line:_ NormalNoneNightNoneEvening NoneLunchNoneSched 4NoneSched 5NoneSched 6None Telco features Feature Assignment Show line:_Caller ID setNExtl VMsg setN1st Display Name Called IDN Log space Log 0 Pool 600 Lines Show line:_ Trunk/Line data (If Target Line) Line typePublic Rec’d #None PrimeSet 221 Distinct RingNone Aux. ringerN If busyPrimeSet(If T1 and Loopstart) Trunk TypeLoop Line typePool A Dial modeTone PrimeSet221 Distinct RingNone Auto privacyY Trunk modeUnspr Ans modeManual Ans with DISAY Link at CO (analog only)N Aux. ringerN Full AutoHoldN LossPkgMediumCO(If T1 and Groundstart) Trunk TypeGround Line typePool A Dial modeTone PrimeSet221 Auto privacyY Ans modeManual Ans with DISAY Aux. ringerN(If T1 and E&M) Trunk TypeE&M Line typePool A Dial modeTone PrimeSet221 Distinct RingNone Auto privacyY Ans modeManual Ans with DISAY Aux. ringerN SignalWinkstart ANI numberN DNIS numberN GainNormal(If T1 and DID) Trunk TypeDID Line typePool A Dial modeTone PrimeSet221 Distinct RingNone Ans mode Man ual Ans with DISAY Link at CON Aux. ringerN SignalWin kst art ANI numberN DNIS numberN Gain Normal(If T1 and Fixed) (Profile 1 only) Trunk TypeFixed(If BRI-ST, BRI-U2 or BRI-U4) Trunk TypeBRI-ST Line typePo ol A PrimeSet221 Distinct RingNone Auto privacyY Ans modeMan ual Ans with DISAY Aux. ringerN Full AutoHoldN(If PRI Lines). Trunk TypePRI Line typePRI-A for 001-023 PRI-B for 025-047 Off-core DTIPRI- C snd PRI-D midi: 061 to 073 or 085 to 097; mega: 085-097 or 061-073) PrimeSet221 Distinct RingNone NameLine001 Restrictions Restrn filters Show filter: _Restn flt 00No restrictionsRestrn flt 01 Restrn 01 Deny 0No overridesLine restrns Normal03 Night21 Evening22 Lunch23 Sched 400 Sched 500 Sched 600 Remote restrns Normal04 Night31 Evening32 Lunch33 Sched 400 Sched 500 Sched 600 Telco features VMsg center1 Programming overview (Profiles 1 and 4) Defaults are shown in bold and underlined
4 Modular ICS 6.1 Programming Record P0603536 02 Services Ringing service Ringing groups Show group:_ Ring grp 01 Show set:_221Assigned222UnassignSched: Night ServiceOff Trunk answerY ExtraDial221 Line settings Show line:_ Ring grp001 Aux. ringerNSched:Evening Sched:Lunch Sched:Sched 4 Sched:Sched 5 Sched:Sched 6 Restrn service Sched:Night ServiceOff Sched:Evening Sched:Lunch Sched:Sched 4 Sched:Sched 5 Sched:Sched 6 Routing service Routes Show route:_DialOut no numbrUse: PoolA..., Pool O, PRI-A - PRI-D (If PRI-A, B, C, or D)SrvcType: Public(If service type is Tie, FX, OUTWATS, requires service id) Service id: None(If Protocol is SL-1 or Tie service type) DN type:PublicDest codes Show DstCode:_ DstCode: Sched:Normal 000 Absorb lengthAllSched:NightNone First route Absorb length Second route Absorb length Third route Absorb length Sched:Evening None Sched:LunchNone Sched:Sched 4None Sched:Sched 5None Sched:Sched 6None Sched:Night ServiceOff OverflowN Sched:Evening Sched:Lunch Sched:Sched 4 Sched:Sched 5 Sched:Sched 6 Common settings Control sets Fo r line s Show line:_ L001221Fo r sets Show set:_ 221221Schedule names Sched 1Night Sched 2Evening Sched 3Lunch Sched 4Sched 4 Sched 5Sched 5 Sched 6Sched 6 Schedule times Monday Sched:Night Start time 23:00 Stop time07:00Sched:Evening Start time17:00 Stop time23:00Sched:Lunch Start time12:00 Stop time13:00Sched:Sched 4 Start time00:00 Stop time00:00Sched:Sched 5 Start time00:00 Stop time00:00Sched:Sched 6 Start time00:00 Stop time00:00Tu esd ay Wednesday Thursday Friday Saturday Sunday Sys speed dial Speed dial #:_ (001 to 255) 001:No number(if number is programmed) Use prime line Display digitsY (if Display digits=N) NameSys Spd Dial 001 Bypass restr’nN Note: To make use of the Alpha tagging feature, you must specify a name for the speed dial. Passwords COS pswds Show pswd #:_ COS pswd #00 Pswd 00None User fltNone Line fltNone Remote pkgNone Call log pswds Show set:_ Log pswdNone Progrming pswds Installer 266344 (CONFIG) SysAdmin+727587 (SCPLUS) Sys admin23646 (ADMIN) Basic22742 (BASIC) Hospitality Desk pswd 4677 (HOSP) Cond pswdNone SM passwd745368 Time&Date Hour01 Minutes00 Year02 Month01 Day01 System prgrming Hunt groups Show group:_ HGnn: Member DNs M001:Appr&Ring Line assignment Show line:_ Lnnn: Unassigned Mode:BroadcastHunt delay: (sequential mode only)4If busy:BusyToneTimeout:60Overflow: or Name: Aux. ringer NDistinct Ring None Change DNs Old DN:_ Max. 7 digits New DN:_ Max. 7 digits Featr settings Backgrnd music N On holdTones Receiver volume Use sys volume Camp timeout45 Park timeout45 Park modeLowest Trnsfr callbk4 DRT to primeY DRT delay4 Held reminderN Remind delay60 Directd pickupY Page toneY Page Timeout180 Daylight timeY AutoTime&DateY SWCA cntl Auto AssociateN Invoke by HoldN Call log space Reset all logs? Space/log Host delay1000 Link time600 AlarmSet221 Set relocation N Msg Reply enhN Anskey:Basic Silent MonitorN Clid match8 Direct-dial D-Dial 1 Intrnl Use prime line CAP/KIM assignment CAP/KIM1 None Dialing Plan Private network TypeNone Priv DN len3 TypeCDP PrivNetId1 Programming overview (Profiles 1 and 4) continued ... Defaults are shown in bold and underlined
5
P0603536 02 Modular ICS 6.1 Programming Record
Priv DN len3
TypeUDP
PrivNetId1
Loc codeNone
Priv DN len3
Public network
Pub DN lengths
Show prefix:
Prfx:Deflt
DN length
7
Dial timeout
Dial timeout4
Access codes
Line pool codes
Line pool A9
Park prefix1
Extrnl codeNone
Direct-dial0
Auto DNNone
DISA DNNone
PrivAccCodeNone
Carrier Codes
Prfx: 10
ID length: 3Prfx: 101
Remote access
Rem access pkgs
Show pkg:_
00
LinePool access
PRI-A (A-D)
NPool A (9)NPool B (B-O) ( )NRemote pageN01N
LinePool access
PRI-A (A-D)NPool A (9)YPool B (B-O) ( )NRemote pageN
Rem line access
Show line:_
L001 Rem pkg00
Rec’d # length3
DN length3
BusNameNone
CbC limits(NI-2 protocol only)
Pool PRI-AService: Public
Min in
Max in
Min out
Max out
Service: Tie
Service: FX
Service: OUTWATS
Service: 800
Pool PRI-B
Release reasons
Text:
None
Hospitality
Room/desk info
Show set:___
Room #: _
Adm pwd req’d:Y
Call restrnsVacant:00Use flt:__
Basic:00Mid:00Full:00Service timeHour:00Minutes:00
AlarmAttn attempts:3Retry intrvl:4Attn duration:15Time format12h rExpired Alarms
Notify set:None
Use Tone:N
SM sets5
Network Services
(SL-1 MCDN only)
MCDN
NetwkICCLN
TROY
TATN
Telco features
VMsg ctr tel#s
VMsg center 1
Use: Line|routing tbl
Te l#:no number
VMsg center 2
VMsg center 3
VMsg center 4
VMsg center 5
ONN blocking
Analog VSC
Tone
None
PulseNone
BRI VSC
Code
None
Software keys
(Used to activate ISDN PRI and fixed access
trunks/WAN access for Data Modules)
(MICS-XC: also activates Companion
features.)
SysID (8 digi ts)
Password keys
Key 1
(8 digits)
Key 2 (8 digits)
Key 3 (8 digits)
Hardware
Show Module:_
Cards on KSU
Cd1-KSU
Loop
Card typeLoop
Lines
Discon timer
460(If T1 card)Card typeT1
Lines
Discon timer
460
Answer timer2
CO failT1A-547A
I/F levelsISDN
FramingESF
Internal CSUOn
CSU line bld0
DSX1 bld000-100
Line codingB8ZS
Clock SrcPrimary(If PRI card)Card type: PRI
Lines
(If protocol is for MCDN)
ProtocolSL1
PrivNetID1
Type Slave
BchanSeqDescend
ClockSrcPrimary
Max transits31
(If more than one P rotocol)
ProtocolNI-2
PrivNetID30
BchanSeqDescend
CbC Routing
(If Protocol is DMS-100)
CbC values
FXNone
800None
(If Protocol is NI-2)
CbC values
FXNone
800None
(If Protocol is DMS-250)
CbC values
FXNone
800None
900None
(If Protocol is AT&T-4ESS)
CbC values
FXNone
800None
I800None
900None
SDSNone
CO failTIA-547A
I/F levels:ISDN
Framing ESF
Internal CSUOn
CSU line bld0
Line codingB8ZS
Clock SrcPrimary(If DID card)Card typeDID
Lines(If E&M card)Card typeE&M
Lines
Answer timer
2(If BRI card)Card type
Loops
Loop aaa
Type
TProtocol
SamplingFixed(For S and LT)Assign DNs
Show DN:_Availabl
Loop DN:_ None(For T & NT) SPIDn
# of B-channels
1
Network DNs
DN1
Call type
BothD-packet service
D-packet servc
LPnnn
NoneTEIs
TEI
Clock Src
Primary
ONN blkSu prsBitDataMod settings for Profile 1 only
(If DataMod=IDM 200)
TypeIDM 200
Fixed access
Show line:_
L001:
UnassignedL001:Channel:xx
DataMod NVRAM(If DataMod=BayStack)TypeBayStack
IP address
Fixed access
Show line:_
L001:
UnassignedL001:Channel:xx
Switched access
Line assignment
Show line:_
L001:UnassignedLinePool access
LinePool PRI-A:NL001:UnassignedDial-in:None(MICS-XC only)
(If DataMod=SDI)
TypeSDI
Programming overview (Profiles 1 and 4) continued ...
Defaults are shown in bold and underlined
6 Modular ICS 6.1 Programming Record P0603536 02 Config Ptl V.35DS0 rate64kTxClk srcAutoTxClk invrsnOffData invrsnOffFixed access Show line:_ L001: UnassignedL001:Channel:xx Lp stateNone LpbkOff Cd2-KSULoop Mod 03 to 08StnMod Maintenance System version Port/DN status Module status Sys test log Sys admin log Network evt log Provisioning Tests CSU stats Diagnostic tools Link status Usage Metrics Hunt groups Call-by-Call ProfilePROF 1 DialpadQ, Z:0 Startup Template (MICS)Square/(XC)PBX Start DN 221 Terminals&Sets Show set:_ Line access Line assignment Show line:_(If it is a Non-DID line)L001Unassigned(If it is a DID line)L0011 LinePool access LinePool AY(if there are PRI pools)LinePool PRI-A N Prime lineI/C Intercom keys2 Answer DNs Show set:_ 222Unassigned OLI#None Capabilities Fwd no answer Fwd to None Forward delay4 Fw d on busy Fwd to None DND on BusyN HandsfreeNone HF answerbackY Pickup grpNone Page zone1 PagingY D-DialSet1 Priority CallN HotlineNone (if Hotline=Extrnl and number specified ) Use prime line Aux. ringerN Allow redirectN Redirect ringY Intrusion Protect Lvl None ATA settings ATA ans timer7 ATA useOff site MsglndicateNone ATA dvcModem SM SupervisorN Name221 User prefernces Mdl M7208 Button prgrming User speed dial (256-279) Call log opt’ns No one answered Dialing opt’ns Standard dial LanguageEnglish Display cntrst4 Ring type1 Restrictions Restrn filters Show filter: _ Restn flt 00No restrictionsRestrn flt 01 Restrn 01 Deny 0 No overrides Set restrns Filters Normal02Night11Evening12Lunch13Sched 400Sched 500Sched 600Set lockNone Allow last noY Allow saved noY Allow linkY Line/set rstrns Show line:_ NormalNoneNightNoneEvening NoneLunchNoneSched 4NoneSched 5NoneSched 6None Telco features Feature Assignment Show line:_ Caller ID setNExtl VMsg setN 1st Display Name Called IDN Log space Log 0 Pool 600 Lines Show line:_ Trunk/Line data (If Target Line) Line typePublic Rec’d #None PrimeSet 221 Distinct RingNone Aux. ringerN If busyPrimeSet(If PRI Lines (001 to 030, 031 to 060) Profile 2 only Trunk TypePRI Line typePRI-A PrimeSet221 Distinct RingNone(If T1 and Loopstart) Profile 3 only Trunk TypeLoop Line typePo ol A Dial modeTone PrimeSet221 Distinct RingNone Auto privacyY Trunk modeUnspr Ans modeMan ual Ans with DISAY Link at CO (analog only)N Aux. ringerN Full AutoHoldN LossPkgMediumCO(If T1 and Groundstart) Profile 3 only Trunk TypeGround Line typePo ol A Dial modeTone PrimeSet221 Distinct RingNone Auto privacyY Ans modeMan ual Ans with DISAY Aux. ringerN(If T1 and E&M) Profile 3 only Trunk TypeE&M Line typePo ol A Dial modeTone PrimeSet221 Distinct RingNone Auto privacyY Ans modeMan ual Ans with DISAY Aux. ringerN SignalWin kst art ANI numberN DNIS numberN GainNormal Programming overview (Profiles 2 and 3) Defaults are shown in bold and underlined
7 P0603536 02 Modular ICS 6.1 Programming Record (If T1 and DID) Profile 3 only Trunk TypeDID Line typePool A Dial modeTone PrimeSet221 Distinct RingNone Ans mode Manual Ans with DISAY Link at CON Aux. ringerN SignalWinkstart ANI numberN DNIS numberN Gain Normal(If BRI-2 or BRI-ST) Trunk TypeBRI-ST Line typePool A PrimeSet221 Distinct RingNone Auto privacyY Ans modeManual Ans with DISAY Aux. ringerN Full AutoHoldN NameLine001 Restrictions Restrn filters Show filter: _ Restn flt 00No restrictionsRestrn flt 01 Restrn 01 Deny 0No overrides Line restrns Normal03 Night21 Evening22 Lunch23 Sched 400 Sched 500 Sched 600 Remote restrns Normal04 Night31 Evening32 Lunch33 Sched 400 Sched 500 Sched 600 Telco features VMsg center 1 Services Ringing service Ringing groups Show group:_ Ring grp 01 Show set:_ 221Assigned222Unassign Sched: Night ServiceOff Trunk answerY ExtraDial221 Line settings Show line:_ Ring grp001 Aux. ringerN Sched:Evening Sched:Lunch Sched:Sched 4 Sched:Sched 5 Sched:Sched 6 Restrn service Sched:Night ServiceOff Sched:Evening Sched:Lunch Sched:Sched 4 Sched:Sched 5 Sched:Sched 6 Routing service Routes Show route:_ DialOut no numbrUse: PoolA..., Pool O, Dest codes Show DstCode:_ DstCode: Normal000 Absorb lengthAllSched:NightNone First route Absorb length Second route Absorb length Third route Absorb length Sched:Evening None Sched:LunchNone Sched:Sched 4None Sched:Sched 5None Sched:Sched 6None Sched:Night ServiceOff OverflowN Sched:Evening Sched:Lunch Sched:Sched 4 Sched:Sched 5 Sched:Sched 6 Common settings Control sets For lines Show line:_L001221For sets Show set:_221221 Schedule names Sched 1Night Sched 2Evening Sched 3Lunch Sched 4Sched 4 Sched 5Sched 5 Sched 6Sched 6 Schedule times Monday Sched:Night Start time 23:00 Stop time07:00Sched:Evening Start time17:00 Stop time23:00Sched:Lunch Start time12:00 Stop time13:00Sched:Sched 4 Start time00:00 Stop time00:00Sched:Sched 5 Start time00:00 Stop time00:00Sched:Sched 6 Start time00:00 Stop time00:00Tuesday Wednesday Thursday Friday Saturday Sunday Sys speed dial Speed dial #:_ (001 to 255) 001:No number(if number is programmed) Use prime line Display digitsY (if Display digits=N) NameSys Spd Dial 001 Bypass restr’nN Note: To make use of the Alpha tagging feature, you must specify a name for the speed dial. Passwords COS pswds Show pswd #:_ COS pswd #00 Pswd 00None User fltNone Line fltNone Remote pkgNone Call log pswds Show set:_ Log pswdNone Progrming pswds Installer 266344 (CONFIG) SysAdmin+727587 (SCPLUS) Sys admin23646 (ADMIN) Basic22742 (BASIC) Hospitality Desk pswd 4677 (HOSP) Cond pswdNone SM password745368 Time&Date Hour01 Minutes00 Year02 Month01 Day01 System prgrming Hunt groups Show group:_ HGnn: Member DNs M001:Appr&Ring Line assignment Show line:_ Lnnn: UnassignedMode:BroadcastHunt delay: (sequential mode only)4If busy:BusyToneTimeout:60Overflow: or Name: Aux. ringer NDistinct Ring None Programming overview (Profiles 2 and 3) continued ... Defaults are shown in bold and underlined
8 Modular ICS 6.1 Programming Record P0603536 02 Change DNs Old DN:_ Max. 7 digits New DN:_ Max. 7 digits Featr settings Backgrnd music N On holdTones Receiver volume Use sys volume Camp timeout45 Park timeout45 Park modeLowest Trnsfr callbk4 DRT to primeY DRT delay4 Held reminderN Remind delay60 Directd pickupY Page toneY Page Timeout180 Daylight timeY AutoTime&DateY SWCA cntl Auto AssociateN Invoke by HoldN Call log space Reset all logs? Space/log Host delay1000 Link time600 AlarmSet221 Set relocation N Msg Reply enhN Anskey:Basic Silent MonitorN Clid match8 Direct-dial D-Dial 1 Intrnl Use prime line CAP/KIM assignment CAP1/KIM1 None Dialing Plan Private network TypeNone Priv DN len3 TypeCDP PrivNetId1 Priv DN len3 TypeUDP PrivNetId3 Loc codeNone Priv DN len4 Public network Pub DN lengths Show prefix:Prfx:Deflt DN length 7Dial time out Access codes Line pool codes Line pool A9 Park prefix1 Extrnl codeNone Direct-dial0 Auto DNNone DISA DNNone PrivAccCodeNone Carrier Codes Prfx: 10 ID length: 3Prfx: 101 Remote access Rem access pkgs Show pkg:_ 00 LinePool access PRI-A (A-D) NPool A (9)NPool B (B-O) ( )NRemote pageN01N LinePool access PRI-A (A-D)NPool A (9)YPool B (B-O) ( )NRemote pageN Rem line access Show line:_ L001 Rem pkg00 Rec’d # length3 DN length3 Nat’nl length10 MK/BR40 / 60 BusNameNone Release reasons Text: None Hospitality Room/desk info Show set:___ Room #: _ Adm pwd req’d:Y Call restrnsVacant:00Use flt:__ Basic:00Mid:00Full:00Service timeHour:00Minutes:00Alarm Attn attempts:3Retry intrvl:4Attn duration:15Time format12hrExpired Alarms Notify set: None Use Tone:N Network Services ETSI Profile 2 only Netwrk RedirectN MCIDN MCDN (ETSI)(SL-1 MCDN only) NetwkICCLN TROY TATN SM sets5 Telco features VMsg ctr tel#s VMsg center 1 Use: Line|routing tbl Tel# No number VMsg center 2 VMsg center 3 VMsg center 4 VMsg center 5 ONN blocking Analog VSC Tone None PulseNone BRI VSC Code None Software keys (Not used with Profiles 2 and 3) Hardware Show Module:_ Cards on KSU Cd1-KSU Loop Card typeLoop Lines Discon timer 460(If ETSI PRI card no MCDN) Profile 2 onlyCard type: PRI Lines Protocol Euro ClockSrcPrimary Ovlap recvingN(If ETSI PRI card with MCDN) Profile 2 onlyCard type: PRI Lines Protocol SL1 PrivNetID1 Type Slave BchanSeqDescend ClockSrcPrimary Max transits31(If PRI protocol is for MC DN) Profile 3 onlyProtocolSL1 PrivNetID1 Type Slave BchanSeqDescend ClockSrcPrimary Max transits31(If T1 card) Profile 3 onlyCard typeT1 Lines Discon timer 460 Answer timer2 CO failT1A-547A I/F levelsISDN FramingESF Internal CSUOn CSU line bld0 DSX1 bld000-100 Line codingB8ZS Clock SrcPrimary(If DID card) Profile 3 onlyCard typeDID Lines(If E&M card) Profile 3 onlyCard typeE&M Lines Answer timer 2(If BRI-2 or BRI-ST card)Card typeBRI-ST Loops Loop aaa (For T type)Clock SrcPrimary ONN blkSu prsBit Ovlap recvingN Public digit length8(For S type)SamplingAdaptve Assign DNs Show DN:_Availabl Loop DN:_ None Cd2-KSULoop Mod 03-08 (MICS)StnMod Mod 03-14 ( MICS- XC)StnMod Maintenance System version Port/DN status Module status Sys test log Sys admin log Programming overview (Profiles 2 and 3) continued ... Defaults are shown in bold and underlined
9 P0603536 02 Modular ICS 6.1 Programming Record Network evt log Provisioning Tests CSU stats Diagnostic tools Link status Usage Metrics Hunt groups Call-by-Call ProfilePROF 1 DialpadQ, Z:0 Startup Template PBX Start DN 221 Terminals&Sets Show set:_ Line access Line assignment Show line:_(If it is a Non-DID line)L001Unassigned(If it is a DID line)L0011(If PRI)L001: PRI-A LinePool access LinePool PRI-AN(if there are PRI pools)LinePool PRI-A N Prime lineI/C Intercom keys2 Answer DNs Show set:_ 222Unassigned OLI#None OLI as calld #N Capabilities Fwd no answer Fwd to None Forward delay4 Fw d on busy Fwd to None DND on BusyN HandsfreeNone HF answerbackY Pickup grpNone Page zone1 PagingY D-DialSet1 Priority CallN HotlineNone (if Hotline=Extrnl and number specified ) Use prime line Aux. ringerN Allow redirectN Redirect ringY Intrusion Protect Lvl None ATA settings ATA ans timer7 ATA useOff site MsglndicateNone ATA dvcModem SM SupervisorN Name221 User prefernces Mdl M7208 Button prgrming User speed dial (256-279 Call log opt’ns No one answered Dialing opt’ns Standard dial LanguageEnglish Display cntrst4 Ring type1 Restrictions Restrn filters Show filter: _ Restn flt 00No restrictionsRestrn flt 01 Restrn 01 Deny 0 No overrides Set restrns Filters Normal 02Night11Evening12Lunch13Sched 400Sched 500Sched 600Set lockNone Allow last noY Allow saved noY Allow linkY Line/set rstrns Show line:_ NormalNoneNightNoneEvening NoneLunchNoneSched 4NoneSched 5NoneSched 6None Telco features Feature Assignment Show line:_ Caller ID setNExtl VMsg setN 1st Display Name Called IDN Log space Log 0 Pool 600 Lines Show line:_ Trunk/Line data (If Target Line) Line typePublic Rec’d #None PrimeSet 221 Distinct RingNone Aux. ringerN If busyPrimeSet( If T1 and Loopstart) Trunk TypeLoop Line typePo ol A Dial modeTone PrimeSet221 Distinct RingNone Auto privacyY Trunk modeUnspr Ans modeMan ual Ans with DISAY Link at CO (analog only)N Aux. ringerN Full AutoHoldN LossPkgMediumCO(If T1 and Groundstart) Trunk TypeGround Line typePo ol A Dial modeTone PrimeSet221 Distinct RingNone Auto privacyY Ans modeMan ual Ans with DISAY Aux. ringerN(If T1 and E&M) Trunk TypeE&M Line typePo ol A Dial modeTone PrimeSet221 Distinct RingNone Auto privacyY Ans modeMan ual Ans with DISAY Aux. ringerN SignalWin kst art ANI numberN DNIS numberN GainNormal(If T1 and DID) Trunk TypeDID Line typePo ol A Dial modeTone PrimeSet221 Programming overview MICS-XC (Companion) Defaults are shown in bold and underlined
10 Modular ICS 6.1 Programming Record P0603536 02 Distinct RingNone Ans mode Manual Ans with DISAY Link at CON Aux. ringerN SignalWinkstart ANI numberN DNIS numberN Gain Normal(If T1 and Fixed) (Profile 1 only) Trunk TypeFixed(If BRI-ST, BRI-U2 or BRI-U4) Trunk TypeBRI-ST Line typePool A PrimeSet221 Distinct RingNone Auto privacyY Ans modeManual Ans with DISAY Aux. ringerN Full AutoHoldN(If PRI Lines (001 to 023, 031 to 053. Trunk TypePRI Line typePRI- A for 001-023 PRI- B for 025-047 Off-core DTIPRI-C snd PRI-D midi: 061 to 073 or 085 to 097; mega: 085-097 or 061-073) PrimeSet221 Distinct RingNone NameLine001 Restrictions Restrn filters Show filter: _Restn flt 00No restrictionsRestrn flt 01 Restrn 01 Deny 0No overridesLine restrns Normal03 Night21 Evening22 Lunch23 Sched 400 Sched 500 Sched 600 Remote restrns Normal04 Night31 Evening32 Lunch33 Sched 400 Sched 500 Sched 600 Telco features VMsg center 1 Services Ringing service Ringing groups Show group:_ Ring grp 01 Show set:_221Assigned222UnassignSched: Night ServiceOff Trunk answerY ExtraDial221 Line settings Show line:_ Ring grp001 Aux. ringerNSched:Evening Sched:Lunch Sched:Sched 4 Sched:Sched 5 Sched:Sched 6 Restrn service Sched:Night ServiceOff Sched:Evening Sched:Lunch Sched:Sched 4 Sched:Sched 5 Sched:Sched 6 Routing service Routes Show route:_DialOut no numbrUse: PoolA..., Pool O, PRI-A - PRI-D (If PRI-A, B, C, or D) SrvcType: Public(If service type is Tie, FX, OUTWATS, requires service id) Service id: None(If Protocol is SL-1 or Tie service type) DN type:Public Dest codes Show DstCode:_ DstCode: Normal 000 Absorb lengthAllSched:NightNoneFirst route Absorb length Second route Absorb length Third route Absorb length Sched:Evening None Sched:LunchNone Sched:Sched 4None Sched:Sched 5None Sched:Sched 6None Sched:Night ServiceOff OverflowN Sched:Evening Sched:Lunch Sched:Sched 4 Sched:Sched 5 Sched:Sched 6 Common settings Control sets For lines Show line:_ L001221For sets Show set:_ 221221Schedule names Sched 1Night Sched 2Evening Sched 3Lunch Sched 4Sched 4 Sched 5Sched 5 Sched 6Sched 6 Schedule times Monday Sched:Night Start time 23:00 Stop time07:00Sched:Evening Start time17:00 Stop time23:00Sched:Lunch Start time12:00 Stop time13:00Sched:Sched 4 Start time00:00 Stop time00:00Sched:Sched 5 Start time00:00 Stop time00:00Sched:Sched 6 Start time00:00 Stop time00:00Tuesday Wednesday Thursday Friday Saturday Sunday Sys speed dial Speed dial #:_ (001 to 255) 001:No number(if number is programmed) Use prime line Display digitsY (if Display digits=N) NameSys Spd Dial 001 Bypass restr’nN Note: To make use of the Alphatagging feature, you must specify a name for the speed dial. Passwords COS pswds Show pswd #:_ COS pswd #00 Pswd 00None User fltNone Line fltNone Remote pkgNone Call log pswds Show set:_ Log pswdNone Progrming pswds Installer 266344 (CONFIG) SysAdmin+727587 (SCPLUS) Sys admin23646 (ADMIN) Basic22742 (BASIC) Reg. pswd72346(MICS-XC only) Hospitality Desk pswd 4677 (HOSP) Cond pswdNone SM password745368 Time&Date Hour01 Minutes00 Year02 Month01 Day01 Programming overview MICS-XC (Companion) continued ... Defaults are shown in bold and underlined
11 P0603536 02 Modular ICS 6.1 Programming Record System prgrming Hunt groups Show group:_ HGnn: Member DNs M001:Appr&Ring Line assignment Show line:_ Lnnn: UnassignedMode:BroadcastHunt delay: (sequential mode only)4If busy:BusyToneTimeout:60Overflow: or Name: Aux. ringer NDistinct Ring None Change DNs Old DN:_ Max. 7 digits New DN:_ Max. 7 digits Featr settings Backgrnd music N On holdTones Receiver volume Use sys volume Camp timeout45 Park timeout45 Park modeLowest Trnsfr callbk4 DRT to primeY DRT delay4 Held reminderN Remind delay60 Directd pickupY Page toneY Page Timeout180 Daylight timeY AutoTime&DateY Call log space Reset all logs? Space/log Host delay1000 Link time600 AlarmSet221 Set relocation N Msg Reply enhN Anskey:Basic SWCA cntl Auto AssociateN Invoke by HoldN CLID Match8 Silent MonitorN Direct-dial D-Dial 1 Intrnl Use prime line CAP/KIM assignment CAP1/KIM1 None Dialing Plan Private network TypeNone Priv DN len3 TypeCDP PrivNetId1 Priv DN len3 TypeUDP PrivNetId1 Loc codeNone Priv DN len3 Public network Pub DN lengths Show prefix: Prfx:Deflt DN length 7 Dial timeoutDial timeout4 Access codes Line pool codes Line pool A9 Park prefix1 Extrnl codeNone Direct-dial0 Auto DNNone DISA DNNone PrivAccCodeNone Carrier Codes Prfx: 10 ID length: 3Prfx: 101 Remote access Rem access pkgs Show pkg:_ 00 LinePool access PRI-A (A-D) NPool A (9)NPool B (B-O) ( )NRemote pageN01NLinePool access PRI-A (A-D)NPool A (9)YPool B (B-O) ( )NRemote pageNRem line access Show line:_ L001 Rem pkg00 Change DN type (MICS- XC o nly) Show DN 637:Portable StateAvailable Companion (MICS- XC o nly) Registration Registration N Portable DNs Show DN: 637AvailbleRadio data Re-evaluation Status: Schedule: RadiosCell assignment Show radio:Unassigned Antenna type Show radio: Internal Cells Show cell:_ Cell radios Show radio:UnassignedCell nghbrs Show nghbr:UnassignedCell rad nghbrs ShowRadNghbr:Unassigned System LID: Rec’d # length3 DN length3 BusNameNone CbC limits Pool PRI-A Service: Public Min in Max in Min out Max out Service: Tie Service: FX Service: OUTWATS Service: 800 Pool PRI-B Release reasons Text: None Hospitality Room/desk info Show set:___ Room #: _ Adm pwd req’d:Y Call restrnsVacant:00Use flt:__ Basic:00Mid:00Full:00 Service time Hour:00Minutes:00AlarmAttn attempts:3Retry intrvl:4Attn duration:15Time format12hrExpired Alarms Notify set: None Use Tone:N Network Services (SL-1 MCDN only) MCDN NetwkICCLN TROY TATN SM sets5 Telco features VMsg ctr tel#s VMsg center 1 Use: Line|routing tbl Tel#:no number VMsg center 2 VMsg center 3 VMsg center 4 VMsg center 5 ONN blocking Analog VSC Tone None PulseNone BRI VSC Code None Software keys (Used to activate ISDN PRI and fixed access trunks/WAN access for Data Modules) (MICS-XC: also activates Companion features.) SysID (8 digits) Password keys Key 1 (8 digits) Key 2 (8 digits) Key 3 (8 digits) Hardware Show Module:_ Cards on KSU Cd1-KSU Loop Card typeLoop Lines Programming overview MICS-XC (Companion) continued ... Defaults are shown in bold and underlined
12
Modular ICS 6.1 Programming Record P0603536 02
Discon timer460(If T1 card)Card typeT1
Lines
Discon timer
460
Answer timer2
CO failT1A-547A
I/F levelsISDN
FramingESF
Internal CSUOn
CSU line bld0
DSX1 bld000-100
Line codingB8ZS
Clock SrcPrimary(If PRI card)Card type: PRI
Lines
(If protocol is for MCDN)
ProtocolSL 1
CRC: (profile 2 only)ON
PrivNetID1
Type Slave
BchanSeqDescend
ClockSrcPrimary
Max transits31
(If more than one Protocol)
ProtocolNI-2
PrivNetID30
BchanSeqDescend
CbC Routing
(If Protocol is DMS-100)
CbC values
FXNone
800None
(If Protocol is NI-2)
CbC values
FXNone
800None
(If Protocol is DMS-250)
CbC values
FXNone
800None
900None
(If Protocol is AT&T-4ESS)
CbC values
FXNone
800None
I800None
900None
SDSNone
CO failTIA-547A
I/F levels:ISDN
Framing ESF
Internal CSUOn
CSU line bld0
Line codingB8ZS
Clock SrcPrimary(If DID card)Card typeDID
Lines(If E&M card)Card typeE&M
LinesAnswer timer
2(If BRI card)Card type
Loops
Loop aaa
Type
TProtocol
SamplingFixed(For S and LT)Assign DNs
Show DN:_Availabl
Loop DN:_ None(For T & NT) SPIDn
# of B-channels
1
Network DNs
DN1
Call type
BothD-packet service
D-packet servc
LPnnn
NoneTEIs
TEI
Clock Src
Primary
ONN blkSuprsBitDataMod settings for Profile 1 only
(If DataMod=IDM 200)
TypeIDM 200
Fixed access
Show line:_
L001:
UnassignedL001:Channel:xx
DataMod NVRAM(If DataMod=BayStack)TypeBayStack
IP address
Fixed access
Show line:_
L001:
UnassignedL001:Channel:xx
Switched access
Line assignment
Show line:_
L001:UnassignedLinePool access
LinePool PRI-A:NL001:UnassignedDial-in:None(MICS-XC only)
(If DataMod=SDI)
TypeSDI
Config
PtlV.35DS0 rate64kTxClk srcAutoTxClk invrsnOffData invrsnOffFixed access
Show line:_
L001:
UnassignedL001:Channel:xx
Lp stateNone
LpbkOff
Cd2-KSULoop
Mod 03 to 08StnMod
Maintenance
System version
Port/DN status
Module status
Sys test log
Sys admin log
Network evt log
Provisioning
Tests
CSU stats
Diagnostic tools
Link status
Usage Metrics
Hunt groups
Call-by-Call
Programming overview MICS-XC (Companion) continued ...
Defaults are shown in bold and underlined