Nortel Modular Ics 6.1 Programming Record Manual

•

Modular ICS 6.1 Programming Record
(includes MICS-XC programming)
Use with 
MICS 6.1 or
MICS-XC 6.1 software
P0603536   02 

Telephone buttons
You can use the following types of telephones to program your MICs system:
M7310 or M7324 Norstar telephones or T7316 or T7316E Business Series Terminal.
This guide uses the Business Series Telephone button icons for programming procedures. 
Refer to the table below for the keycap icons that correspond to the programming commands. 
Business Series Terminals
T7316, T7316E
Button descriptionNorstar telephones
M7310, M7324
²Featureƒ
Handsfree:  (T7316E)
Mute: Handsfree/Mute©
³úHold˙...

P0603536   02 Modular ICS 6.1 Programming Record
Contents
Telephone buttons ii
General information 1
Installed equipment 2
Programming overview (Profiles 1 and 4) 3
Programming overview (Profiles 2 and 3) 6
Programming overview MICS-XC (Companion) 9
Companion programming charts 13
System LID  (Companion sets for MICS-XC systems) 13
Software keys 13
SysID 13
Companion ID 13
Password keys for Companion (MICS-XC systems)  13
Reg. pswd (XC Companion) 13
Change DN type (Companion sets for MICS-XC systems) 14...

iv
Modular ICS 6.1 Programming RecordP0603536   02 
Profile 19
Dialpad 19
Template 19
Start DN 19
Terminals&Sets 20
Line Access 20
Capabilities 21
Name 22
User prefernces 22
Button prgrming 23
Model M7100/T7100 Button Programming 23
Model M7208/T7208 Button Programming 24
Model M7310 Button Programming  25
Model T7316 Button Programming 27
Model T7316E and KIM Button Programming 28
KIM module 29
Model M7324 Button Programming and CAP Assignments 30
User speed dial 32
Restrictions 33
Restrn filters 33
Set...

v
Modular ICS 6.1 Programming RecordP0603536   02 
Line restrns 44
Remote restrns 44
Telco features 44
Services 45
Ringing service 45
Restrn service 46
Routing service 47
If PRI-A, PRI-B, PRI-C, or PRI-D 48
If service type requires service id 48
If Protocol is SL-1 or TIE service type 48
Using line pools to create a dialing plan 48
Dest codes 49
Dest codes 50
Activating routing schedules 51
Common settings 51
Control sets 51
Schedule names 51
Sys speed dial 52
Passwords 53
COS pswds 53
Call log paswds...

vi
Modular ICS 6.1 Programming RecordP0603536   02 
Remote access 59
Rec’d # length 60
DN length 60
National length 60
Make / Break 60
Business name 60
CbC limits 60
Release reasons 60
Hospitality 61
SM sets 61
Network Services 61
ETSI (Profile 2, only) (software key required) 61
MCDN (Profile 1, 2, and 3, only) (software key required) 61
Telco features 62
VMSg ctr tel#s 62
ONN blocking 62
Software keys 63
SysID 63
Password keys 63
Password keys for ISDN PRI 63
Password keys for fixed T1 lines 63...

vii
Modular ICS 6.1 Programming RecordP0603536   02 
StnMod 71
Maintenance 72
System version 72
Sys test log 73
Sys Admin Log 74
Network evt log 75
Template specific defaults 76
Terminals&Sets defaults 76
Line Access 76
Restrictions 76
Telco features (Feature assignmnt) 77
Lines defaults 77
Trunk/Line data (Target lines) 77
Trunk/Line data (Digital and Analog loopstart) 77
Trunk/Line data (Digital and Analog Groundstart) 78
Trunk/Line data (Digital and E&M lines) 78
Trunk/Line data (Digital and Analog...

viii
Modular ICS 6.1 Programming RecordP0603536   02  

1
P0603536   02 Modular ICS 6.1 Programming Record
General information
All defaults for the default templates are shown in bold and underlined text.
Copying set programming
You can use the COPY command to copy programming from one telephone to other set, a range of sets or all the sets. Depending on
where the display button is pressed, you will copy either all the programming for a telephone or only the programming found under one
of the individual sub-headings. 
For general set copying, you can choose...

2
Modular ICS 6.1 Programming RecordP0603536   02
Installed equipment
0X32 ICSTelephones
QuantityEquipmentQuantityEquipment
Integrated Communication System (ICS)M7100 telephone
Modular ICS NVRAM cartridgeM7208 telephone
Modular ICS ROM software cartridgeM7310 telephone
Cartridge assemblyM7310 with Busy Lamp Field (BLF)
Expansion Cartridge 2-port (fiber)M7324
Expansion Cartridge 6-port (fiber)M7324 with 1 or more CAP modules
6-port Expansion and IVD Services (Combo card)T7316E with 1 or more KIM modules...