Nortel Compact Ics 6.1 System Coordinator Guide

Troubleshooting / 251
P0603544   02 Compact ICS 6.1 Syste m Coordin ator Guide
3. Pick up the handset and listen. You should hear dial tone through the 
handset at a maximum volume. The volume is reset to maximum only 
while the test is going on.
Pressing any button or hanging up ends the test.
Testing the telephone headset
The headset test is not available to telephones that do not have a headset 
jack or a headset plugged in.
1. Press 
²¡âÞ, then £ or NEXT until the display shows 
Headset test.
2....

252 / Troubleshooting
Com pact ICS 6.1 System Coordinator Guide P0603544   02 

P0603544   02 Compact ICS 6.1 Syste m Coordin ator Guide
Common feature displays
You may see the following displays when you use a feature.
Someone is already using programming, or the 
feature you are trying to use is not compatible 
with the configuration of the telephone or line.
You have tried to use a feature, but you have not 
been given access to it in administration 
programming. 
You have taken more than 15 seconds to press a 
button in response to a display.
You have entered a feature code that...

254 / Common feature displays
Com pact ICS 6.1 System Coordinator Guide P0603544   02
You have received a Ring Again offer for a call to 
an internal telephone. Press the flashing internal 
line button
 or YES to call the number again. On  
M7100 or T7100 telephones, just lift the handset. 
Otherwise, press
 NO or wait 30 seconds for the 
Ring Again offer to expire. For an explanation of 
Ring Again, see ‘‘Using Ring Again’’ on page 80.
The person to whom you camped the call did not 
answer it. The call...

Common feature displays / 255
P0603544   02 Compact ICS 6.1 Syste m Coordin ator Guide
You are receiving a priority call. If you are on 
another call, inform the person you are speaking 
to that the call is about to be put on hold. Press 
the flashing line indicator of the priority call or 
wait  until the call connects automatically (in eight 
seconds). The priority call goes through when 
you hear the next beep. Your active call is placed 
on Exclusive Hold. It is reconnected 
automatically when the...

256 / Common feature displays
Com pact ICS 6.1 System Coordinator Guide P0603544   02
All the lines or line pools available to the 
telephone are in use. This display also appears 
when you have tried to dial an external number or 
use a feature that conflicts with the lines, line 
p oo l s o r  p r i m e  l i n e  u s e d  by  t h e  te l e p hone. T h i s  
must be corrected by your customer service 
representative or installer.
The telephone has been set up to dial an external 
number on a prime line...

P0603544   02 Compact ICS 6.1 Syste m Coordinator Guide
Index
Symbols
§ Long Distance symbol 253
²
Autobumping
canceling #815
 141
using 815
 141
autodial button
external *1
 97, 99
internal *2
 97
Background Music
canceling #86
 202
turning on 86
 202
Button Inquiry *0
 103, 147, 
243, 249
Call Duration Timer 77
 71
Call Forward
canceling #4
 119
using 4
 119
Call Information 811
 54, 55
Call Log
entering 812
 143
external calls 813
 140
options *84
 140
password *85
 142, 143
viewing 812
 141
Call...

258 / Index
Com pact ICS 6.1 System Coordinator Guide P0603544   02
Line Redirection
canceling #84
 124
using 84
 123
Message
canceling
£Ú 133
sending
Ú 132
viewing ones you sent
Ú 
134
viewing
ßÞ 133
Page
combined zone
ᚠ129
external zone
ßÛ 129
internal zone
ßÚ 129
using
ßâ 115, 117, 
129
Password
Basic
 29, 
225
Call Log *85
 143
System 
Coordinator

ö
 27, 29, 31, 34, 35, 
36, 37, 38, 39, 40, 41, 
225
Password, Call Log *85
 143
Priority Call
ßá 79
Privacy 83
 70
Restriction Service
turning off...

Index / 259
P0603544   02 Compact ICS 6.1 Syste m Coordinator Guide
‡ Wait for Dial Tone symbol 
236
A
access
Class of Service
 240
external lines
 245
Norstar from outside the 
system
 237
remote
 239
using a COS
 238
using a DISA
 238
Access denied 253
ADD 246
administration password (see 
System Coordinator 
password)
administration programming
 16
Alarm 61-4-2
 249
alarm codes
reporting and recording
 249
alarm telephone
 249
Allow calls
 201
allow redirect
programming
 124
Already joined
 58, 73...

260 / Index
Com pact ICS 6.1 System Coordinator Guide P0603544   02
programming 97
storing number on a memory 
button
 97
using Last Number Redial
 
100
Autodial full
 98
automatic
Call information
 56
Call Log
 139
dial
 77
Handsfree
 68
Hold
 105
release of a line (see 
Disconnect Supervision)
Automatic Call Back, ISDN 
terminal feature
 214
Automatic Recall
ISDN terminal feature
 214
Automatic Telephone Relocation
 
200, 243
auxiliary ringer
 232
Hunt Groups
 178
B
Back 21
Background Music
 202
basic...