Nokia 6200 User Guide

							[ 32 ]
Enter punctuation and special characters
While at any text entry screen in standard mode, press s to display 
special characters. If predictive text is on, press and hold 
s to display 
special characters. The following characters are available:
Use four-way scrolling
Navigate special characters using the scroll 
keys much as you would a joystick. Once a 
character is highlighted, press
 Insert to 
insert the character into your message.
  PREDICTIVE TEXT INPUT
Predictive text allows you to quickly write messages using your keypad 
and the built-in dictionary. It is much faster than using the traditional 
“multi-tap” method. For each letter of the word that you are spelling, you 
only need to press the corresponding key on your keypad once. 
You can use predictive text to write messages, create calendar notes, 
make to-do lists, and more.
Activate/deactivate predictive text
1At a text entry screen, press and hold 
Options. 
T9 prediction off or 
T9 prediction on appears (depending on the prior mode).
OR
If predictive text is off, press 
Options, scroll to 
Predictive text, and 
press 
Select.   .   ,   ‘   ?   !   “  -   (   )
 @   /   :   _   ;   +  &
 %  *
  =  <  >  £  $  ¥   ¤  [
 ]  {   }  \   ~   ^   ¡   ¿   §
 #    l
Up
 Down LeftRight 
						

							[ 33 ]Text entry
2Scroll to the language of your choice and press 
Select. Predictive text 
is turned on. The predictive text icon ( ) appears in the upper left 
corner of the display.
Note: The language setting in predictive text affects the time and 
date formats of the clock, alarm clock, and calendar.
Write with predictive text
For example, to write Nokia with the English dictionary selected, press each 
of the following keys only once: (with predictive text 
on). The illustration 
below simulates your display each time a key is pressed.
      6         6          5         4          2
PREDICTIVE TEXT TIPS
Press 
0 to enter a space and begin writing the next word.
 If a displayed word is not correct, press 
s to see other matches.
If 
? appears after a word, press 
Spell to add the word to the dictionary.
Press 
1 to insert a period into your message.
Press and hold 
Options to turn predictive text on and off.
 Press and hold 
s to display special characters. See “Enter punctuation 
and special characters” and “Use four-way scrolling” on the previous 
page for the easiest way to enter special characters.
Note: Press 
p to switch predictive text on and off or to cycle 
through the available modes. As you press 
p, the following icons 
(not descriptions) appear in the display:
Uppercase text. Predictive text is Off.
Lowercase text. Predictive text is Off.
Sentence case text. Predictive text is On.
Lowercase text. Predictive text is On. 
						

							[ 34 ]
Add new words to the dictionary
If you encounter a word that predictive text does not recognize, a 
question mark (
?) follows the word and 
Spell appears in the lower 
left of the display.
Press 
Spell, enter your new word using the keypad, and press 
Save. 
The word is added to the dictionary as well as to the message you 
are writing.
NOTES ABOUT ADDING WORDS
 New words that you accept by pressing 
Select, 
0, or deleting the 
space between two words are saved to the dictionary.
 Depending on the language and the length of the words, you may be 
able to add hundreds of words to the dictionary.
 When the dictionary is full, the most recent addition replaces the first. 
						

							[ 35 ]Manage phone security
6 Manage phone security
Lock the keypad (Keyguard)
Remember to lock your phone keypad to prevent accidental calls. If the 
keypad is locked, it unlocks when you receive a call. After the call, the lock 
automatically reactivates.
Important: When the phone is locked, calls may be possible to 
emergency numbers (for example, 911). Key in the emergency 
number and press 
h. The number appears in the display after you 
have keyed in the last digit.
To lock the keypad, press 
Menu 
s at the Start screen.
Unlock the keypad
At the Start screen, press 
Unlock s.
  SECURITY LEVELS
The security level determines your access to features when a “nonowner” 
SIM card is used. A nonowner SIM card is one (other than the original) that 
is inserted after you power off the phone. There are three security levels:
Set your security level
1At the Start screen, press 
Menu 4-8-5 (
Settings > Security settings > 
Security level). After a brief pause, you are prompted to enter the 
security code. The default code is 12345.
OffOwner and nonowner cards are treated the same.
MemoryNonowner cards can access SIM memory. Any changes to 
the memory setting requires the security code.
The owner card has access to all features, but the security 
code is required to change a memory setting.
PhoneThe security code is required upon power-up. 
						

							[ 36 ] 2Enter the security code and press 
OK. 
3Scroll to 
Off, 
Memory, or 
Phone and press 
Select. A message appears 
in the display confirming your selection
  FIXED DIALING
Once you setup and activate a fixed dialing list, your phone can make calls 
only to those numbers that you have defined in the fixed dialing list. Fixed 
dialing is a network feature and must be supported by your wireless provider.
Note: When fixed dialing is set on, calls may be possible to certain 
emergency numbers in some networks (for example, 911 or other 
official emergency number).
Set up and activate a fixed dialing list
1At the Start screen, press 
Menu 4-8-3 (
Settings > Security Settings > 
Fixed dialing). After a brief pause, the options in the following table 
appear in the display:
Note: If you activate fixed dialing and the number list is empty, a 
“Call not allowed” message is displayed if you attempt outgoing 
calls, except for emergency numbers such as 911.
2Scroll to 
Number list and press 
Select. 
Fixed dialing not active and 
then 
Fixed dialing list empty appear in the display. You are prompted 
to enter the PIN2 code.
3Enter the PIN2 code and press 
OK. If you do not know your PIN2 code, 
see “PIN2 Code” on page 40 for more information.
4Enter the fixed dialing number, or press 
Find to retrieve a number 
from your contacts list, and press 
OK.
OnActivate fixed dialing (see note above).
OffDeactivate fixed dialing.
Number listView the numbers in your fixed dialing list. 
						

							[ 37 ]Manage phone security
5Enter a name for the number and press 
OK. A confirmation note 
appears in the display and you are returned to the fixed dialing 
number list.
6Press 
Back, scroll to 
On, and press 
Select to activate fixed dialing.
View or edit the fixed dialing list
1At the Start screen, press 
Menu 4-8-3 (
Settings > Security Settings > 
Fixed dialing).
2Scroll to 
Number list and press 
Select. You are prompted to enter the 
PIN2 code.
3Enter the PIN2 code and press 
OK. Any numbers which you have 
assigned to fixed dialing appear in the display.
4Scroll to a number and press 
Options. The options in the following 
table appear in the display:
 Use the scroll keys to highlight an option.
Press 
Select to activate or enter the submenu of an option.
Notes about fixed dialing
 If a SIM card with fixed dialing that is activated is inserted into a 
phone that does not support fixed dialing, the SIM card is rejected.
 If you try to add a name (without a number) to the fixed dialing list, 
you will receive an error message.
View numberView the number for an entry.
AddAdd a number to your fixed dialing list.
EditEdit the highlighted entry.
DeleteDelete the highlighted entry.
Delete allDelete all entries in your fixed dialing list. 
						

							[ 38 ]  If you try to browse the fixed dialing list, but have not stored any 
numbers, 
Fixed dialing list empty appears in the display.
 You cannot access SIM memory manually (view or copy numbers on 
the SIM card) while fixed dialing is active.
Closed user groups
A closed user group is a network service that specifies the group of people 
whom you can call and who can call you. For more information contact 
your network operator or service provider.
Note: When calls are limited to closed user groups, calls may 
be possible to certain emergency numbers in some networks 
(for example, 911).
  ACCESS CODES
Use access codes to change your security code, PIN code, and PIN2 code.
Note: Avoid using codes similar to emergency numbers such as 
911 to prevent accidental dialing of the emergency number.
Security code
The security code controls access to features such as the security level and 
is supplied with the phone. The preset code is 12345.
Note: If you enter the wrong security code five times in succession, 
you will not be able to enter a code for five minutes, even if you 
power off the phone between incorrect entries.
CHANGE YOUR SECURITY CODE
Once you change the security code from its preset of 12345, keep the new 
code secret, and in a safe place separate from your phone.
1Press 
Menu 4-8-6-1 (
Settings > Security settings > Access codes > 
Change security code). After a brief pause, you are prompted to enter 
the current security code (default is 12345).
2Enter the current security code and press 
OK. You are prompted to 
enter the new security code. 
						

							[ 39 ]Manage phone security
3Enter the new security code (up to 10 characters) and press 
OK. 
You are asked to re-enter the new security code for verification.
4Enter the new security code again and press 
OK. A message appears 
in the display confirming your security code has been changed.
PIN code
The PIN code protects the SIM card from unauthorized access. The PIN code 
can be 4-8 digits in length. After three successive incorrect entries the PIN 
code is blocked and you will be asked to enter the personal unblocking key 
(PUK) code. See “Personal unblocking key (PUK) codes” on page 40.
Note: The PIN code must be obtained from your wireless provider. 
The PIN code is typically provided with your SIM card.
PIN CODE REQUEST
Enable your phone to request the PIN code upon power-up. This provides 
extra security in case your phone is lost or stolen.
1Press 
Menu 4-8-1 (
Settings > Security settings > PIN code request). 
After a brief pause, you are prompted to enter the current PIN code.
2Enter the PIN code and press 
OK.
3Scroll to 
On and press 
OK.
 A message appears in the display 
confirming your selection.
CHANGE YOUR PIN CODE
Before you can change your PIN code, you will need to enable 
PIN code 
request. See “PIN code request” immediately preceding this section.
1Press 
Menu 4-8-6-2 (
Settings > Security settings > Access codes > 
Change PIN code). After a brief pause, you are prompted to enter the 
current PIN code.
2Enter the current PIN code and press 
OK. You are prompted to enter 
the new PIN code.
3Enter the new PIN code and press 
OK. You are prompted to re-enter 
the new PIN code for verification.
4Enter the new PIN code again and press 
OK. A message appears in the 
display confirming your PIN code has been changed. 
						

							[ 40 ]
PIN2 Code
The PIN2 code is required for features such as fixed dialing. If you enter 
an incorrect PIN2 code three times in succession, the PIN2 code is blocked 
and you will have to enter the PUK2 code.
Note: The original PIN2 code must be obtained from your 
wireless provider.
CHANGE YOUR PIN2 CODE
1Press 
Menu 4-8-6-3 (
Settings > Security settings > Access codes > 
Change PIN2 code). You are prompted to enter the current PIN2 code.
2Enter the current PIN2 code and press 
OK. You are prompted to enter 
the new PIN2 code.
3Enter the new PIN2 code and press 
OK. You are asked to verify the 
new PIN2 code by entering it again.
4Enter the new PIN2 code again and press 
OK. A message appears in 
the display confirming you have changed the PIN2 code.
Personal unblocking key (PUK) codes
PUK and PUK2 codes are used to restore blocked PIN and PIN2 codes. 
Both PUK and PUK2 codes are eight characters in length and cannot 
be changed. PUK and PUK2 codes must be obtained from your 
wireless provider.
Important: If you enter an incorrect PUK or PUK2 code 10 times 
in succession, the message 
SIM rejected appears in the display and 
the SIM card can no longer be used. You must contact your wireless 
provider for a new SIM card. 
						

							[ 41 ]Contacts
7Contacts
Your contacts list can save up to 500 names, with multiple numbers and 
text notes for each name. The amount of numbers and text entries that 
you can save may vary, depending on their length and the total number 
of entries in the contacts list.
Note: This feature uses shared memory. See “Shared memory” on 
page 12 for more information.
  VIEW THE CONTACTS LIST
1At the Start screen, press the right selection key (c) under 
Contacts. 
The menu items in the left column of the following table appear in 
the display:
Note: If you have changed the function of the right selection key 
on your phone, 
Go to is on the Start screen. See “Right selection 
key settings” on page 85 for details.
Menu itemFunction
FindFind a name or select from a list.
Add entryAdd an entry to your contacts list.
Edit nameEdit an existing contact.
DeleteDelete a contact and its associated numbers.
CopyCopy entries from phone memory to SIM or SIM to 
phone memory.
Add numberAdd a number to an existing contact.
SettingsSet memory in use (phone or SIM), change your 
contacts list view, and check the memory status 
of your phone and SIM card.