Nokia 3650 User Guide

							[ 112 ] 3Set the alarm time and date.
4Press 
Done. An alarm indicator   is shown next to the entry in the 
Day view.
Stop a calendar alarm
The alarm duration is one minute. When the alarm time expires, press 
Stop to end the calendar alarm. If you press any other key, the alarm is 
set to snooze.
  SEND CALENDAR ENTRIES
In the Day view, scroll to the entry you want to send and select 
Options→ 
Send. Then select the method, the choices are:
 Via text message, 
Via e-mail 
(available only if the correct e-mail settings are in place), 
Via Bluetooth, 
or 
Via infrared. For further information, see the “Messaging” on p. 71, 
“Send and receive data via infrared” on p. 143, and “Send data via Bluetooth 
connection” on p. 139.
 TO-DO
Go to 
Menu→ 
To-do.
In To-do you can keep a list of tasks that you need to do.
The To-do list uses shared memory. See “Shared memory” on p. 19.
1To start to write a to-do note, press any key 
( to  ). The editor opens and the cursor 
blinks after the letters you have keyed in.
2Write the task in the Subject field. Press   
to add special characters.
 To set the due date, scroll to the Due date 
field and key in a date. 
 To set a priority, scroll to the Priority field 
and press  . 
3To save the to-do note, press 
Done. 
						

							[ 113 ]Calendar and To-do
Note:If you remove all characters and press 
Done, the previously saved 
note will be deleted.

To open a to-do note, scroll to it and press  .

To delete a to-do note, scroll to it and select 
Options→ 
Delete 
or press  .

To mark a to-do note as completed, scroll to it and select 
Options→ 
Mark as done. 

To restore a to-do note, select 
Options→ 
Mark as not done. 
  IMPORT DATA FROM OTHER NOKIA PHONES
You can move calendar, contacts, and to-do data from many different 
Nokia phones to your Nokia 3600 or Nokia 3650 using the PC Suite Data 
Import application. Instructions for using the application can be found in 
the PC Suite online help on the CD-ROM.
Priority icons
 High
Low
no icon Normal
Status icons
task completed
task not completed 
						

							[ 114 ]
13 Extras
  CALCULATOR
Note: Your phone must be switched on to use this function. Do not 
switch the phone on when wireless phone use is prohibited or 
when it may cause interference or danger.
Go to 
Menu→ 
Extras→ 
Calculator.
Options in Calculator are: Last result, 
Memory, 
Clear screen, 
Help, 
and 
Exit.
1Enter the first number of your calculation. Press   to erase 
any mistakes.
2Scroll to a function and press   to select it.
Use   to add,   to subtract,   to multiply, or   to divide. 
3Enter the second number.
4To execute the calculation, scroll to   and press  .
Note:The Calculator has limited accuracy and rounding errors may 
occur, especially in long divisions.
 To add a decimal, press  .
 Press and hold   to clear the result of the previous calculation.
 Use   and   to view previous calculations and move in 
the sheet.
 Select   to save a number to the memory, indicated by 
M. 
To retrieve the number from the memory, select  .
 To retrieve the result of the last calculation, select 
Options→ 
Last result.
Tip:Press   repeatedly to scroll the functions. You can see the selection 
change between the functions. 
						

							[ 115 ]Extras
  COMPOSER
Go to 
Menu→ Extras→ Composer.
Options in the Composer main view are: Open,
 New tone, 
Delete, 
Mark/Unmark, 
Rename,
 Duplicate,
 Help, and 
Exit.
Composer allows you to create your own, customized ringing tones. 
Note that it is not possible to edit a default ringing tone.
1Select 
Options→ 
New tone to open the editor and to start composing.
 Use the keys to add notes and rests. See the table. 
Or, select 
Options→ 
Insert symbol to open a list of notes and rests. 
The default duration for a note is 1/4.
 To listen to the tone, press 
 or select 
Options→ 
Play. The playback 
is always started from the beginning of the tone. To stop playing, 
press 
Stop.
 To adjust the volume while a tone is playing, press   to increase 
or press   to decrease it. Or, select 
Options→ 
Volume before 
you start to play the tone.
 To adjust the tempo, select 
Options→ 
Tempo. To increase 
or decrease the tempo gradually, press and hold   or  , 
respectively. Tempo is measured in beats per minute. 
The maximum is 250 beats, the default tempo for a new 
tone is 160 beats, and the minimum is 50 beats.
 To select many notes or rests at the same time, press and hold   
and press and hold   or   at the same time. 
 To apply different playing styles, select two or more notes and 
then select 
Options→ Style→ 
Legato (notes are played in a 
smooth and even manner) or select one or more notes and then 
select 
Staccato (notes are played separately to produce short 
sharp sounds).
 To move note(s) up or down on the staff by a half step, scroll to 
the note and press   or  .
 For example, press and hold   together with   to produce C#. 
						

							[ 116 ] 2Select 
Back to save.
Options when composing are: 
Play, 
Insert symbol, 
Style, 
Tempo, 
Volume, 
Help and 
Exit.
 CONVERTER
In Converter, you can convert measures such as Length from 
one unit (Ya r ds) to another (Meters).      
Go to 
Menu→ 
Extras 
→ 
Converter.       
Options in Converter are: 
Select unit /
Change currency, 
Conversion type, 
Currency rates, 
Help, and 
Exit.
Note:The Converter has limited accuracy and rounding errors may occur.
Convert units
1Scroll to the Type field and press   to open a list of measures. 
Scroll to the measure you want to use and press 
OK.
KeyNoteKey and function
C Shortens the duration of the selected note(s)/
rest(s) in steps.
D Lengthens the duration of the selected note(s)/
rest(s) in steps.
E
 Inserts a rest.
F
Press   to open a list of notes and rests.
G Switches octaves, all selected note(s) or rest(s) is/
are moved to the next octave.
A Deletes selected note(s).
BA long press of keys   to   produces a lengthened 
(dotted) note or rest or shortens a lengthened note. 
						

							[ 117 ]Extras
2Scroll to the first Unit field and press   to open a list of available 
units. Select the unit from which you want to convert and press 
OK.
Scroll to the next Unit field and select the unit to which you want 
to convert.
3Scroll to the first Amount field and key in the value you want to 
convert. The other Amount field changes automatically to show 
the converted value.
Press   to add a decimal and press   for the 
+, 
- (for temperature), 
and 
E (exponent) symbols.
Note:The conversion order changes if you write a value in the second 
Amount field. The result is shown in the first Amount field.
Tip:To rename a currency, go to the Currency rates view, scroll to the 
currency, and select 
Options→ 
Rename currency.
Set a base currency and exchange rates
Before you can make currency conversions, you need to choose a base 
currency (usually your domestic currency) and add exchange rates.
Note:The rate of the base currency is always 1. The base currency 
determines the conversion rates of the other currencies.
Example: If you set the United States Dollar (USD) as the base currency, a 
Euro is 1.00. Thus, you would write 1.00 as the exchange rate for the Euro.
1Select Currency as the measure type and select 
Options→ 
Currency 
rates. A list of currencies opens and you can see the current base 
currency at the top.
2To change the base currency, scroll to the currency (usually your 
domestic currency), and select 
Options→ 
Set as base curr..
Important:When you change the base currency, all previously set exchange 
rates are set to 
0 and you need to key in new rates.
3Add exchange rates (see example), scroll to the currency, and key in a 
new rate, that is, how many units of the currency equal one unit of 
the base currency you have selected.
4After you have inserted all the needed exchange rates, you can make 
currency conversions. See “Convert units” on p. 116. 
						

							[ 118 ]
 NOTES
Go to 
Menu→ 
Extras→ 
Notes.
You can link notes to Favorites and send them to other devices. Plain text 
files (TXT format) you receive can be saved to Notes.
Press (  to  ) to start to write. Press   to clear letters. Press 
Done 
to save.
 CLOCK
Go to 
Menu→ 
Extras→ 
Clock.
Options in Clock are: 
Set alarm, 
Reset alarm, 
Remove alarm, 
Settings, 
Help, and 
Exit.
Change clock settings
To change the time or date, select 
Options→ 
Settings in Clock. To change 
the clock shown in standby mode, scroll down in the Date and time settings 
and select 
Clock type→ 
Analog or 
Digital.
Set an alarm
1To set a new alarm, select 
Options→ 
Set alarm.
2Enter the alarm time and press 
OK. When the alarm is active, the   
indicator is shown.
The alarm clock works even if the phone is switched off.
To cancel an alarm, go to clock and select 
Options→ 
Remove alarm.
Turn off an alarm
Press 
Stop to turn off the alarm. 
 When the alarm tone sounds, press any key or 
Snooze to stop the 
alarm for five minutes, after which it will resume. You can do this a 
maximum of five times.
If the alarm time is reached while the phone is switched off, the phone 
switches itself on and starts sounding the alarm tone. If you press 
Stop, 
the phone asks whether you want to activate the phone for calls. Press 
No 
to switch off the phone or 
Yes to make and receive calls. 
						

							[ 119 ]Extras
Note:Do not press 
Yes when wireless phone use is prohibited or when it 
may cause interference or danger.
 RECORDER
Go to 
Menu→ 
Extras→ 
Recorder.
Options in Recorder are: Open, 
Record sound clip, 
Delete, 
Move to phone 
mem, 
Move to mem. card, 
Rename sound clip,
 Send,
 Add to Favorites,
 Help,
 
and 
Exit.
The voice recorder allows you to record telephone conversations and voice 
memos. If you are recording a telephone conversation, both parties will 
hear a tone every five seconds during recording.
Note:When using this feature, obey all laws and respect the privacy and 
legitimate rights of others. 
Select 
Options→ 
Record sound clip and scroll to a function and press   
to select it. Use:   - to record,   - to pause,   - to stop,   - to 
fast forward,   - to fast rewind, or   - to play an opened sound file.
Note:Recorder cannot be used when a data call or a GPRS connection 
is active.
  MEMORY CARD
Options in the memory card are: Backup phone mem., 
Restore from card, 
Format mem. card, 
Memory card name, 
Set password, 
Change password, 
Remove password, 
Unlock memory card, 
Mem. in use, 
Help and 
Exit.
If you have a memory card you can use it to store your multimedia files 
like video clips and sound files, photos, messaging information, and to 
backup information from your phone’s memory.
Important:Keep all memory cards out of the reach of small children.
Note:Details of how you can use the memory card with other features 
and applications of the Nokia 3600 and Nokia 3650 are given in 
the sections describing these features and applications. 
						

							[ 120 ]
Insert the memory card
1Make sure the phone is switched off.
2With the back of the phone facing you, slide open the cover and remove 
the battery, see Quick start ‘Insert the SIM card’ for instructions on 
removing the cover.
3Position the memory card in its slot. 
Make sure that the gold contacts of the card are facing down.
4Slide the silver catch over the memory card to secure it.
5When you have secured the card in place, replace the battery, then 
replace the cover by sliding it back into place.
Important:If you are installing an application 
to the memory card and need to 
reboot the phone, do not remove 
the card until the reboot is 
complete. Otherwise the 
application files may be lost.
Format the memory card
You must format the memory card before 
you can use it for the first time. 
						

							[ 121 ]Extras
Select 
Options→ Format mem. card.
You will be asked to confirm your request and once you confirm, 
formatting starts.
Back up and restore phone memory
You can backup information from your phone’s memory to the memory 
card. Select 
Options→ Backup phone mem.
You can restore information from the memory card to the phone’s 
memory. Select 
Options→ Restore from card.
Memory card password
You can set a password to protect your memory card against 
unauthorized use.
Note:The password is stored in your phone and you do not have to enter 
it again while you are using the memory card on the same phone. 
If you want to use the memory card on another phone, you will be 
asked for the password.
To set up, change, or remove your password select 
Options→ Set password, 
Change password, or 
Remove password.
The password can be up to eight characters long.
Important:Once the password is removed, the memory card can be used 
on any phone without a password.
UNLOCK A MEMORY CARD
If you insert another password protected memory card in your phone, you 
will be prompted to enter the password of the card. To unlock the card, 
select 
Options→ Unlock memory card.
Check memory consumption
Using the 
Mem. in use option, you can check the memory consumption 
of different data groups and the available memory for installing new 
applications or software on your memory card. 
Select 
Options→ Mem. in use.