Nitsuko Portrait 308/824 Program Record Form Manual

							Program 65  - Voice Mail Port(Display  shows: VOICE MAIL PORT)
Voice Mail Port(s)
Program Record Form Entry
1.  Enter the port number(s) to be assigned to the voice mail.
System Program Entry
1.  Enter 65 (program number).
2.  Press *.
3.  Enter the port to be assigned to the voice mail.
4.  Press *.
5.  Enter the next port to be assigned OR Press # to exit the program.
Program 66 - DISA Timers(Display  shows:  DISA TIMERS)
(1.)
Automatic
Answer
Time(2.) Dial    
Waiting 
Time(3.)
Extension
Calling
Time
Program Record Form Entry
1.  Enter desired option number in each features column.
System Program Entry
1.  Enter 66 (program number).
2.  Press *.
3.  Enter the option number (1-3) to be programmed.
4.  Press *.
5.  Enter data for the option being programmed.
6.  Press *.
7.  Enter the information for the next displayed option OR
     Press # to exit program.
(1.) Automatic Answer Time
000=answers at once, 001-255 =
1-255 seconds
(2.) Dial Waiting Time
001-255 = 1-255 seconds
(3.) Extension Calling Time
001-255 = 1-255 seconds
Options
For each voice mail port, assign the
extension port number to be used
00=no port assigned, 10 - 17 (308),
10 - 33 (824)=extension ports
Options
- 43 - 
						

							Program 67 - Fax Assignment (1) (Portrait 308 Only)(Display  shows: FAX ASSIGNMENT1)
(1.) Line
Number(2.) Station
Port
Program Record Form Entry
1.  Enter the line number and station port to be assigned to the
     fax machine.
System Program Entry
1.  Enter 67 (program number).
2.  Press *.
3.  Enter the line number to be assigned.
4.  Press *.
5.  Enter the station port to be assigned.
6.  Press *.
7.  Press # to exit the program.
Program 68 - Fax Assignment (2) (Portrait 308 Only)(Display  shows: FAX ASSIGNMENT2)
(A.) Line
Type(B.) CNG
Signal is
Not
Received(C.)
Extension
Busy(D.) Not
Used(E.) Not
Used
00
Program Record Form Entry
1.  Enter the desired option number in each features column.
System Program Entry
1.  Enter 68 (program number).
2.  Press *.
3.  Enter the data from columns A-E.
4.  Press *.
5.  Press # to exit the program.
(1.) Line Number
00=not assigned, 01 - 03=line numbers 01-03
(2.) Station Port
00=not assigned, 12 - 17=stations 12-17
Options
(A.) Line Type
0=fax, 1=DISA, 2=fax and DISA
(B.) CNG Signal is Not Received
0=cut off, 1=transfer to operator, 2=transfer
to fax
(C.) Extension Busy
0=cut off, 1=transfer to operator, 2=resend
Attendant Message #2
(D.) Not Used
Must be entered as 0.
(E.) Not Used
 Must be entered as 0.
Options
- 44 - 
						

							Program 69 - Fax Assignment (3) (Portrait 308 Only)(Display  shows: FAX ASSIGNMENT3)
(1.)
Automatic
Answer(2.) Waiting
Time for
CNG Signal
Detection(3.) Waiting
Time for
DTMF
Signal
Receiving(4.) Calling
Time for
Telephone /
Fax
Program Record Form Entry
1.  Enter the desired option number in each features column.
System Program Entry
1.  Enter 69 (program number).
2.  Press *.
3.  Enter the data from column 1 OR Press * to advance to the
     desired option, then enter data.
4.  Press *.
5.  Enter the data for the next option or press * to advance to the desired option.
6.  Press # to exit the program.
Program 74 - Caller ID Timers(Display  shows: CALLER-ID TIMERS)
(1.) Caller
ID
Information
Waiting
Timer(2.)
Incoming
Signal
Detection
Timer(3.) Caller
ID Signal
Duration
Timer(4.) Caller
ID Signal
Carrier
Detection
Timer
Program Record Form Entry
1.  Enter the desired option number in each features column.
System Program Entry
1.  Enter 74 (program number).
2.  Press *.
3.  Enter the item number to be programmed.
4.  Press *.
5.  Enter the data for the option being programmed.
6.  Press *.
7.  Enter the data for the next option OR Press # to exit the program.
(1.) Automatic Answer
000=immediate answer, 001 - 255=1-255
 seconds
(2.) Waiting Time for CNG Signal Dectection
000=not assigned, 001 - 255=1-255 seconds
(3.) Waiting Time for DTMF Signal Receiving
000=not assigned, 001 - 255=1-255 seconds
(4.) Calling Time for Telephone/Fax
000=not assigned, 001 - 255=1-255 seconds
Options
(1.) Caller ID Information Waiting Timer
000=no delay, 001 - 015=1-15 seconds
(2.) Incoming Signal Detection Timer
000 - 015=0-1.5 seconds (in 100 ms intervals)
(3.) Caller ID Signal Duration Timer
000 - 015=0-750 ms (in 50 ms intervals)
(4.) Caller ID Signal Carrier Detection Timer
000 - 008=500-900 ms (50 ms intervals) OR
009 - 014=1-2 seconds (200 ms intervals)
OR 015=3 seconds.  Example: 000=500 ms,
001=500 ms, 002=600 ms, etc. OR 009=1.0
second, 010=1.2 seconds, 011=1.4 seconds
OR 015=3 seconds
Options
- 45 - 
						

							Program 75 - Extension Options (5)(Display  shows: STN ASSIGNMENT5)
(A.) Not
Used(B.) Not
Used(C.)
Automatic
Line Seizing
by Fax(D.) Not
Used(E.) Not
Used
00 00
Program Record Form Entry
1.  Enter the desired option number in each features column.
System Program Entry
1.  Enter 75 (program number).
2.  Press *.
3.  Enter the station port to be programmed.
4.  Enter the data from columns A-E.
5.  Press *.
6.  Enter the data for the next station OR Press * to advance the
     station port numbers OR Press # to exit the program.
Program 77 - Extension Options (6)(Display  shows: STN ASSIGNMENT6)
(A.) Hold in
Day Mode(B.) Hold in
Night Mode(C.) Hold in
Dial Block
Mode
Program Record Form Entry
1.  Enter the desired option number in each features column.
System Program Entry
1.  Enter 77 (program number).
2.  Press *.
3.  Enter the station port to be programmed.
4.  Enter the data from columns A-C.
5.  Press *.
6.  Enter the data for the next station OR Press * to advance the
     station port numbers OR Press # to exit the program.
(A.) Not Used
Must be entered as 0.
(B.) Not Used
Must be entered as 0.
(C.) Automatic Line Seizing by Fax
0=disabled, 1=enabled
(D.) Not Used
Must be entered as 0.
(E.) Not Used
 Must be entered as 0.
Options
(A.) Day Mode
0=Hold feature subject to Program 87,
1=can always place calls on Hold
immediately
(B.) Night Mode
0=Hold feature subject to Program 87,
1=can always place calls on Hold
immediately
(C.) Dial Block Mode
0=Hold feature subject to Program 87,
1=can always place calls on Hold
immediately.
Options
- 46 - 
						

							Program 86 - Line Options (3)(Display  shows: LINE ASSIGNMENT3)
(A.) Loop
Disconnect
Detection(B.) Not
Used(B.) Not
Used(D.) Not
Used(E.) Not
Used
0000
Program Record Form Entry
1.  Enter the desired option number in each features column.
System Program Entry
1.  Enter 86 (program number).
2.  Press *.
3.  Enter the line number to be programmed.
4.  Enter the data from columns A-E.
5.  Press *.
6.  Enter the data for the next line OR Press * to advance the
     line numbers OR Press # to exit the program.
Program 87 - Hold Disable Timer(Display  shows: HD DISABLE TIMER)
Hold
Disable
Timer
Program Record Form Entry
1.  Enter the value to be used for the timer.
System Program Entry
1.  Enter 87 (program number).
2.  Press *.
3.  Enter the value to be used for the timer.
4.  Press *.
5.  Press # to exit the program.
Hold Disable Timer:
000=can immediately place a call on
Hold, 001-255 = 1 - 255 second delay
Options
(A.) Loop Disconnect Detection
0=disabled, 1=enabled
(B.) Not Used
Must be entered as 0.
(C.) Not Used
Must be entered as 0.
(D.) Not Used
Must be entered as 0.
(E.) Not Used
 Must be entered as 0.
Options
- 47 - 
						

							Program 88 - Door Relay Timer(Display  shows: DOOR RELAY TIMER)
Door Relay
Timer
Program Record Form Entry
1.  Enter the value to be used for the timer.
System Program Entry
1.  Enter 88 (program number).
2.  Press *.
3.  Enter the value to be used for the timer.
4.  Press *.
5.  Press # to exit the program.
Program 89 - CO Dial Tone Delay Timer(Display  shows: DIAL WAIT TIMER)
CO Dial
Tone Delay
Timer
Program Record Form Entry
1.  Enter the value to be used for the timer.
System Program Entry
1.  Enter 89 (program number).
2.  Press *.
3.  Enter the value to be used for the timer.
4.  Press *.
5.  Press # to exit the program.
CO Dial Tone Delay Timer:
000=no delay, 001-255 = 100 msec -
25.5 second delay
Options
Door Relay Timer:
000=manual operation, 001-255 =
100 msec - 25.5 seconds
Options
- 48 - 
						

							Program 92 - Program Entry Password(Display  shows: SYS.PRG.PASSWORD)
New    Password
Program Record Form Entry
1.  Enter the new system password (8 digits maximum).
System Program Entry
1.  Enter 92 (program number).
2.  Press *.
3.  Enter the new system password.
4.  Press *.
5.  Press # to exit the program.
Program 95 - Sub-CPU Timers(Display  shows: SUB CPU TIMERS)
(1.) Flash
Detect
Timer for
SLTs(2.)
Incoming
Guard
Timer for
SLTs(3.) Call
Abandon
Detect
Timer for
SLTs
Program Record Form Entry
1.  Enter the desired option number in each features column.
System Program Entry
1.  Enter 95 (program number).
2.  Press *.
3.  Enter the item number to be programmed.
4.  Press *.
5.  Enter the data for the option being programmed.
6.  Press *.
7.  Enter the data for the next option OR Press # to exit the program.
Password:
Any digits between 0 and 9
(maximum of 8 digits)
Options
(1.) Flash Detect Timer for SLTs
025 - 119=250 msec-1190 msec
(2.) Incoming Guard Timer for SLTs
001 - 127=100-12,700 msec
(3.) Call Abandon Detect Timer for SLTs
001 - 127=100-12,700 msec
Options
- 49 - 
						

							- 50 - 
						

							Nitsuko America, Telecom Division
4 Forest Parkway
Shelton, CT  06484
TEL: 203-926-5400
FAX: 203-929-0535
Other Important Telephone Numbers
Sales: ...................................................................
Customer Service:................................................
Customer Service FAX:........................................
Technical Service: ...............................................
Discontinued Product Service: ............................
Technical Training:...............................................
Emergency Technical Service (After Hours): ......
          (Excludes discontinued products)203-926-5450
203-926-5444
203-926-5454
203-925-8801
900-990-2541
203-926-5430
203-929-7920