Nitsuko Portrait 308/824 Program Record Form Manual
Have a look at the manual Nitsuko Portrait 308/824 Program Record Form Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 57 Nitsuko manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Program 31 - Line to Line Cut-Off Timer(Display shows: LN.TO LN.TIMERS)
(1.) Path
Connection
Waiting
Timer(2.)
Warning
Tone Timer
for Conv.
Cut-Off
Program Record Form Entry
1. Enter desired option number in each features column.
System Program Entry
1. Enter 31 (program number).
2. Press *.
3. Enter the option number (1 or 2) for the timer to be programmed.
4. Press *.
5. Enter the value for the timer being programmed.
6. Press *.
7. If the first option number entered was 1, you can enter the value for option number 2 OR
Press # to exit the program.
Program 32 - DTMF Receiver Release Timer (Display shows: PB REC.REL.TIMER)
DTMF
Receiver
Release
Timer
Program Record Form Entry
1. Enter desired value for the timer.
System Program Entry
1. Enter 32 (program number).
2. Press *.
3. Enter the value for the timer.
4. Press *.
5. Press # to exit the program.
Options
(1.) Path Connection Waiting Timer
000=disabled, 001 - 255 = 1 - 255
seconds
(2.) Warning Tone Timer for
Conversation Cut-Off
000=disabled, 001 - 255 = 1 - 255
minutes
Options
DTMF Receiver Release Timer:
000=disabled, 001 - 255 = 1 - 255
seconds
- 23 -
Program 33 - LND/Repeat Dial Timer(Display shows: LINE DROP TIMER)
LND/
Repeat Dial
Timer
Program Record Form Entry
1. Enter desired value for the timer.
System Program Entry
1. Enter 33 (program number).
2. Press *.
3. Enter the value for the timer.
4. Press *.
5. Press # to exit the program.
Program 34 - Repeat Dial(Display shows: REP.DIAL.TIMES)
(1.) Waiting
Time
Between
Recall(2.) Calling
Time(3.) Number
of Times
Redialed
Program Record Form Entry
1. Enter desired value for the counter.
System Program Entry
1. Enter 34 (program number).
2. Press *.
3. Enter the value for the option.
4. Press *.
5. Press # to exit the program
Options
Last Number Redial/Repeat
Dial Timer:
000=disabled, 001 - 010 =
1-10 seconds
Options
(1.) Waiting Time Between Recall
000 = No Function, 001-255 =
1-255 Seconds
(2.) Calling Time
000 = No Function, 001-255
Seconds
(3.) Number of Times Redialed
001-255 = 1-255 times
- 24 -
Program 35 - Class of Service(Display shows: CLASS OF SERVICE)
Extension
Port #(A.) Day
Mode(B.) Night
Mode(C.) Dial
Block Class
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
1. Enter 35 (program number).
2. Press *.
3. Enter the extension port to be programmed.
4. Press *.
5. Enter data from columns A-C.
6. Press *.
7. Enter the data for the next extension port
displayed OR
Press * to skip the displayed extension
port OR
Press # to exit program.
Program Record Form Entry
1. Enter the desired Class of Service number
in each features column.
System Program Entry
Options
Enter one of the following Class of Service levels for
options (A.), (B.), and (C.):
0 = No Restrictions
1 = Restricted by Program 40 [4 codes, 4 digits long).
Allows calls matching PBX extension and
Common Unrestricted Codes (Program 39).
2 = Restricted by Program 41 [8 codes, 4 digits long).
Allows Permitted Codes (Program 36), PBX
extension calls and Common Unrestricted
Codes (Program 39).
3 = Restricted byProgram 37 and Program 41
[8 Codes, 2 digits long].
Allows PBX extension calls and Common
Unrestricted Codes (Program 39).
4 = Restricts all outgoing calls.
Allows PBX extension calls and Common
Unrestricted Codes (Program 39).
5 = Restricted to Intercom calls only.
- 25 -
Program 36 - Permitted Codes(Display shows: PERMITTED CODES)
Permitted
Code #Permitted
Codes
01
02
03
04
05
06
07
08
09
10
11
12
Program Record Form Entry
1. For each Permitted Code, program up to the first 8 digits of an allowed telephone number. Use DC
as a Dont Care digit within the 8 digits if it doesnt matter what number is dialed.
System Program Entry
1. Enter 36 (program number).
2. Press *.
3. Enter the Permitted Code number (01-12) to be programmed.
4. Press *.
5. Enter the value for the code being programmed.
6. Press *.
7. Enter the value for the next Permitted Code OR
Press * to skip to the next code OR
Press # to exit the program.
- 26 -
Program 37 - COS 3 Allowed Number of Dialed Digits(Display shows: DIGIT LIMIT COS3)
Allowed
Number of
Dialed
Digits
Program Record Form Entry
1. Enter desired value for this option.
System Program Entry
1. Enter 37 (program number).
2. Press *.
3. Enter the value for the option.
4. Press *.
5. Press # to exit the program.
Program 38 - PBX/Centrex Access Codes(Display shows: PBX ACCESS CODES)
PBX/
Centrex
Access
Code #PBX/
Centrex
Access
Codes
1
2
3
4
Program Record Form Entry
1. For each PBX/Centrex Access Code Number, assign an access code digit (2 digits maximum).
System Program Entry
1. Enter 38 (program number).
2. Press *.
3. Enter the PBX/Centrex Access Code number (1-4) to be programmed.
4. Press *.
5. Enter the value for the code being programmed.
6. Press *.
7. Enter the value for the next PBX/Centrex Access Code OR
Press * to skip to the next code OR
Press # to exit the program.
Options
Allowed Number of Dialed Digits
00 = disabled, 01 - 30 = 1 - 30 digit
limit
Access Codes Digits:
Digits 0-9 are accepted
Options
- 27 -
Program 39 - Common Unrestricted Codes(Display shows: COMM.UNRESTRICT)
Common
Unrestricted
Code #Common
Unrestricted
Codes
1
2
3
4
Program Record Form Entry
1. For each Common Unrestricted Code number, assign an access code digit (4 digits maximum).
System Program Entry
1. Enter 39 (program number).
2. Press *.
3. Enter the Common Unrestricted Code number (1-4) to be programmed.
4. Press *.
5. Enter the value for the code being programmed.
6. Press *.
7. Enter the value for the next Common Unrestricted Code OR
Press * to skip to the next code OR
Press # to exit the program.
Program 40 - COS 1, Restricted Codes(Display shows: RESTR.CODES B)
Restricted
Code #Restricted
Code
1
2
3
4
Program Record Form Entry
1. For each Restricted Code number, assign a Restricted Code digit (4 digits maximum).
System Program Entry
1. Enter 40 (program number).
2. Press *.
3. Enter the Restricted Code number (1-4) to be programmed.
4. Press *.
5. Enter the value for the code being programmed.
6. Press *.
7. Enter the value for the next Restricted Code OR
Press * to skip to the next code OR
Press # to exit the program.
Common Unrestricted Codes Digits:
Digits 0-9 are accepted
Options
Restricted Codes Digits:
Digits 0-9 are accepted
Options
- 28 -
Program 41 - COS 2 and 3, Restricted Codes (Display shows: RESTR. CODES D2)
Restricted
Code #Restricted
Code
1
2
3
4
5
6
7
8
Program Record Form Entry
1. For each Restricted Code number, enter the digits to be assigned to the code number (2 digits maximum).
System Program Entry
1. Enter 41 (program number).
2. Press *.
3. Enter the Restricted Code number (1-8) to be programmed.
4. Press *.
5. Enter the value for the code being programmed.
6. Press *.
7. Enter the value for the next Restricted Code OR
Press * to skip to the next code OR
Press # to exit the program.
Restricted Codes Digits:
Digits 0-9 are accepted
Options
- 29 -
Program 42 - Walking COS Security Code(Display shows: UNREST.SEC.CODES)
Security
Code #Security
CodeSecurity
Code #Security
Code
01 16
02 17
03 18
04 19
05 20
06 21
07 22
08 23
09 24
10 25
11 26
12 27
13 28
14 29
15 30
Program Record Form Entry
1. For each Security Code number, enter the digits to be assigned to the code
System Program Entry
1. Enter 42 (program number).
2. Press *.
3. Enter the Security Code number (01-30) to be programmed.
4. Press *.
5. Enter the value for the code being programmed.
6. Press *.
7. Enter the value for the next Security Code OR
Press * to skip to the next code OR
Press # to exit the program.
Restricted Codes Digits:
Digits 0-9 are accepted
Options
- 30 -
Program 43-COS Assignment on Security Code(Display shows: UNREST.CLASS)
Security
Code #Class of
ServiceSecurity
Code #Class of
Service
01 16
02 17
03 18
04 19
05 20
06 21
07 22
08 23
09 24
10 25
11 26
12 27
13 28
14 29
15 30
Program Record Form Entry
1. For each Walking Class Security Code number,
enter a Class of Service to be assigned to the code.
System Program Entry
1. Enter 43 (program number).
2. Press *.
3. Enter the Security Code number (01-30) to be programmed.
4. Press *.
5. Enter the Class of Service for the code being programmed.
6. Press *.
7. Enter the value for the next Security Code OR
Press * to skip to the next code OR
Press # to exit the program.
Options
Enter one of the following Class of Service levels for
each Security Code:
0 = No Restrictions
1 = Restricted by Program 40 [4 codes, 4 digits long].
Allows calls matching PBX extension and
Common Unrestricted Codes (Program 39).
2 = Restricted by Program 41 [8 codes, 4 digits long].
Allows Permitted Codes (Program 36), PBX
extension calls and Common Unrestricted
Codes (Program 39).
3 = Restricted by Program 37 and Program 41
[8 codes, 2 digits long]
Allows PBX extension calls and Common
Unrestricted Codes (Program 39).
4 = Restricts all outgoing calls.
Allows PBX extension calls and Common
Unrestricted Codes (Program 39).
5 = Restricted to Intercom calls only.
- 31 -
Program 44 - External Alarm Sensor(Display shows: ALARM SENSOR)
Alarm #(A.) Alarm
Installed?(B.) Alarm
Trigger
Condition
1
2
Program Record Form Entry
1. Enter desired option number in each features column.
System Program Entry
1. Enter 44 (program number).
2. Press *.
3. Enter the alarm number to be programmed.
4. Press *.
5. Enter the value from column A for the alarm being programmed.
6. Press *.
7. Enter the value from column B for the alarm being programmed.
8. Press *.
9. If the first alarm programmed was 1, you can enter alarm 2
information by repeating steps 5-8 OR
Press # to exit the program.
Program 45 - Intercom Link Increase(Display shows: ICM LINK INCR.)
Las t U s ed
Line #
Program Record Form Entry WARNING:
1. Enter the last line number used in the system. The system will reset upon exiting
programming mode if this program
System Program Entryis changed.
1. Enter 45 (program number).
2. Press *.
3. Enter the last line number used in the system.
4. Press *.
5. Press # to exit the program.
Options
(A.) Alarm Installed?
0=not installed, 1=installed
(B.) Alarm Trigger Condition
Internal Power: 0=normally closed
loop, 1=normally open loop
OR
External Power: 0=normally open
loop, 1=normally closed loop
Options
Las t U s ed Line # :
00 = not assigned, 01-24 = last line
number used
- 32 -