Nitsuko Portrait 308/824 Program Record Form Manual

							Program 46 - DISA Security Codes(Display  shows:  DISA SEC.CODES)
DISA
Security
Code #Security
Code
1
2
3
4
5
6
7
8
Program Record Form Entry
1.  For each DISA Security Code number, enter the digits to be assigned
     to the code number (4 digits maximum).
System Program Entry
1.  Enter 46 (program number).
2.  Press *.
3.  Enter the DISA Security Code number (1-8) to be programmed.
4.  Press *.
5.  Enter the value for the code being programmed.
6.  Press *.
7.  Enter the value for the next DISA Security Code OR
     Press * to skip to the next code OR
     Press # to exit the program.
Security Code Digits:
Digits 0-9 are accepted
Options
- 33 - 
						

							Program 47 - DISA Security Code Extension(Display  shows:  DISA SEC.CODE ST)
Security
Code #Extension
Port #
1
2
3
4
5
6
7
8
Program Record Form Entry
1.  For each DISA Security Code number, enter the extension port number
     to be assigned to the code.
System Program Entry
1.  Enter 47 (program number).
2.  Press *.
3.  Enter the DISA Security Code number (1-8) to be programmed.
4.  Press *.
5.  Enter the extension port for the code being programmed.
6.  Press *.
7.  Enter the extension port for the next DISA Security Code OR
     Press * to skip to the next code OR
     Press # to exit the program.
- 34 - 
						

							Program 48 - DISA Class of Service(Display  shows:  DISA COS)
DISA
Security
Code #Class of
Service
1
2
3
4
5
6
7
8
Program Record Form Entry
1.  For each DISA Security Code number, enter a
     Class of Service to be assigned to the code.
System Program Entry
1.  Enter 48 (program number).
2.  Press *.
3.  Enter the DISA Security Code number (1-8) to be programmed.
4.  Press *.
5.  Enter the Class of Service for the code being programmed.
6.  Press *.
7.  Enter the value for the next DISA Security Code OR
     Press * to skip to the next code OR
     Press # to exit the program.
Options
Enter one of the following Class of Service levels for each
Security Code:
0 = No Restrictions
1 = Restricted by Program 40 [4 codes,4 digits long].
      Allows calls matching PBX extension and
      Common Unrestricted Codes (Program 39).
2 = Restricted by Program 41 [8 codes, 4 digits long].
      Allows Permitted Codes (Program 36), PBX
      extension calls and Common Unrestricted
      Codes (Program 39).
3 = Restricted by Program 37 and Program 41 [8 codes,
      2 digits long].
      Allows PBX extension calls and Common
      Unrestricted Codes (Program 39).
4 = Restricts all outgoing calls.
      Allows PBX extension calls and Common
      Unrestricted Codes (Program 39).
5 = Restricted to Intercom calls only.
- 35 - 
						

							Program 49 - External Zone BGM/Alarm(Display  shows:  EXT.ZONE BGM/ALM)
External
Speaker
Zone(A.)
Background
Music(B.) Alarm
#1(C.) Alarm
#2
1
2
Program Record Form Entry
1.  Enter desired option number in each features column.
System Program Entry
1.  Enter 49 (program number).
2.  Press *.
3.  Enter the external speaker zone number (1 or 2) to be programmed.
4.  Press *.
5.  Enter the value from columns A-C.
6.  Press *.
7.  If the first external speaker zone programmed was 1, you can enter the
     information for zone 2 by repeating steps 5-6 OR
     Press # to exit the program.
Program 50 - External Zone Line Audible(Display  shows:  EXT.ZONE LN/AUD)
External
Speaker
Zone(A.) Line
Group(B.)
Incoming
Ring Mode
1
2
Program Record Form Entry
1.  Enter desired option number in each features column.
System Program Entry
1.  Enter 50 (program number).
2.  Press *.
3.  Enter the external speaker zone number (1 or 2) to be programmed.
4.  Press *.
5.  Enter the value from columns A-B.
6.  Press *.
7.  If the first external speaker zone programmed was 1, you can enter the
     information for zone 2 by repeating steps 5-6 OR
     Press # to exit the program.
Options
(A.) Background Music
(Not used with Portrait 308)
0=disabled, 1=enabled
(B.) Alarm #1
0=disabled, 1=enabled
(C.) Alarm #2
(Not used with Portrait 308)
0=disabled, 1=enabled
Options
(A.) Line Group
00=no ringing, 01-30=Group 01 -
Group 30
(B.) Incoming Ring Mode
0=no ringing, 1=day ring,
2=night ring, 3=day and
night ring
Note: The Portrait
308 only has one
external speaker
zone.
- 36 - 
						

							Program 51 - Attendant Extension for DISA(Display  shows:  A.A. DIVERT STA.)
Attendant
Ext. Port #
Program Record Form Entry
1.  Enter the attendants extension port number for DISA.
System Program Entry
1.  Enter 51 (program number).
2.  Press *.
3.  Enter the attendants extension port number.
4.  Press *.
5.  Press # to exit the program.
Program 52 - Tenant Options(Display  shows:  TENANT OPTION)
(1.)
Intercom
Call(2.) Internal
Paging(3.)
Common
Speed Dial(4.) Transfer
to Attendant
Program Record Form Entry
1.  Enter desired option number in each features column.
System Program Entry
1.  Enter 52 (program number).
2.  Press *.
3.  Enter the option number (1-4) to be programmed.
4.  Press *.
5.  Enter the value for the option being programmed.
6.  Press *.
7.  Enter the value for the next option OR
     Press * to skip the displayed option OR
     Press # to exit the program.
Options
Attendant Extension Port
Number for DISA:
10-33 = extension port number
Options
(1.) Intercom Call
0=enabled, 1=disabled
(2.) Internal Paging
0=enabled, 1=disabled
(3.) Common Speed Dial
0=common use, 1=assigned
Speed Dial
(4.) Transfer to Attendant
0=system, 1=each tenant
group
- 37 - 
						

							Program 53 - Tenant Speed Dial(Display  shows:  TENANT ABBR.DIAL.)
Tenant
Group #   (A.) First  
Speed
Dial #  (B.) Last    
Speed 
Dial #
01
02
03
04
Program Record Form Entry
1.  Enter the first and last speed dial numbers each tenant group will be able to access.
System Program Entry
1.  Enter 53 (program number).
2.  Press *.
3.  Enter the tenant group (01-04) to be programmed.
4.  Press *.
5.  Enter the value from column A.
6.  Press *.
7.  Enter the value from column B.
8.  Press *.
9.  Enter the information for the next tenant group OR
     Press ** to skip the displayed tenant group OR
     Press # to exit the program.
Program 54 - Tenant Attendant(Display  shows:  TENANT ATT.ASSIG)
Tenant
Group #Attendant
Ext. Port #
01
02
03
04
Program Record Form Entry
1.  Enter the attendants extension port number for each Tenant Group.
System Program Entry
1.  Enter 54 (program number).
2.  Press *.
3.  Enter the attendants extension port number for the display Tenant Group OR
     Press * to skip to the next Tenant Group.
4.  Press *.
5.  Enter the information for the next Tenant Group OR
     Press * to skip the display Tenant Group OR
     Press # to exit the program.
Options
(A.) First Speed Dial #
00-99=available speed dial
numbers
(B.) Last Speed Dial #
00-99=available speed dial
numbers
Options
Attendant Extension Port Number
for each Tenant Group:
10-33 = extension port number
- 38 - 
						

							Program 55 - Park Key Assignment(Display  shows:  PARK HD LN.ASSIG)
Park Group
#(A.) First
Park Key #(B.) Last
Park Key #
01
02
03
04
Program Record Form Entry
1.  Enter the first and last Park Key numbers each Park Group will be able to use.
System Program Entry
1.  Enter 55 (program number).
2.  Press *.
3.  Enter the Park Group (01-04) to be programmed.
4.  Press *.
5.  Enter the value from column A.
6.  Press *.
7.  Enter the value from column B.
8.  Press *.
9.  Enter the information for the next Park Group OR
     Press ** to skip the displayed Park Group OR
     Press # to exit the program.
Program 56 - Relay Assignment(Display  shows:  RELAY ASSIGN)
Relay #(A.) Relay
Option #
1
2
Program Record Form Entry
1.  Enter the option to be assigned to each relay.
System Program Entry
1.  Enter 56 (program number).
2.  Press *.
3.  Enter the relay number (1-2) to be programmed.
4.  Press *.
5.  Enter the value from column A.
6.  Press *.
7.  Enter the information for the next relay OR
     Press # to exit the program.
Options
(A.) First Park Key #
00=not assigned,
01-12=line key number
(B.) Last Park Key #
00=not assigned,
01-12=line key number
Options
(A.) Relay Option
0=not assigned, 1=Door Box 1,
2=Door Box 2, 3=external MOH,
4=Background Music
(Background Music is only
available on the Portrait 824.)
Note:  These
options are not
available with the
Portrait 308.
- 39 - 
						

							Program 57 - SMDR Options (1)(Display  shows:  SMDR ASSIGNMENT1)
(A.) Dial
Digits(B.)
Outgoing/
Incoming
Transfer(C.) No
Answer(D.) KTS
Account
Code(E.)
Incoming
Call
Program Record Form Entry
1.  Enter desired option number in each features column.
System Program Entry
1.  Enter 57 (program number).
2.  Press *.
3.  Enter data from columns A-E.
4.  Press *.
5.  Press # to exit program.
Program 58 - SMDR Options (2)(Display  shows:  SMDR ASSIGNMENT2)
(A.) Print 
Barred 
Outoing  
Calls(B.) Allow   
SLT 
Account
Code(C.) Print
Dialed
Number(D.) Caller   
I.D. 
Printout(E.)
Masking
Digit
Program Record Form Entry
1.  Enter desired option number in each features column.
System Program Entry
1.  Enter 58 (program number).
2.  Press *.
3.  Enter data from columns A-E.
4.  Press *.
5.  Press # to exit program.
(A.) Dial Digits
0=every time, 1=more than the number of digits
assigned in Program 59
(B.) Outgoing/Incoming Transfer
0=printed, 1=not printed
(C.) No Answer
0=printed, 1=not printed
(D.) KTS Account Code
0=input enabled, 1=input forced before dial,
2=input disabled
(E.) Incoming Call
0=printed every time, 1=printed when account
 code is entered
Options
(A.) Print Barred Outgoing Calls
0=printed, 1=not printed
(B.) Allow SLT Account Code
0=input enabled, 1=input disabled
(C.) Print Dialed Number
0=printed, 1=not printed
(D.) Caller I.D. Printout
 0=not printed, 1= telephone number printed,
3= name printed if programed,
otherwise telephone number printed.
(E.) Masking digit
 0=disabled,  1-9= # of digits from the end
 of the # to be masked (replaced
 by an  x).
Options
- 40 - 
						

							Program 59 - SMDR Printout Digit(Display  shows: SMDR PRINT DIGIT)
Dial Digits
Program Record Form Entry
1.  Enter the number of dialed digits (01-24) that must be exceeded
     in order for the SMDR to print the call.
System Program Entry
1.  Enter 59 (program number).
2.  Press *.
3.  Enter the number of dialed digits to be exceeded for SMDR printout.
4.  Press *.
5.  Press # to exit the program.
Program 60 - Loop Disconnect Detection Timer(Display  shows: LOOP DISCONNECT)
Loop
Disconnect
Detection
Timer
Program Record Form Entry
1.  Enter the time the system should wait for detecting open loop (disconnect) from telco.
System Program Entry
1.  Enter 60 (program number).
2.  Press *.
3.  Enter the value for the timer.
4.  Press *.
5.  Press # to exit the program.
Loop Disconnect Detection Timer:
000=not detected, 001 - 050=20-1000 ms
(20 ms steps)
Options
- 41 - 
						

							Program 61 - Extension Options (4)(Display  shows: STN ASSIGNMENT4)
(A.)
Message
Edit Mode(B.) Caller
ID
Indication(C.) Edit
Caller ID
Table(D.) SMDR
Prints
Outgoing
Information(E.) Door
Box
Restricted
Program Record Form Entry
1.  Enter desired option number in each features column.
System Program Entry
1.  Enter 61 (program number).
2.  Press *.
3.  Enter extension port number.
4.  Press *.
5.  Enter data from columns A-E.
6.  Press *.
7.  The next extension port displays. Repeat steps 5-6 OR
      Press * to advance to another extension OR Press # to exit the program.
Program 64  - System Options (7)(Display  shows: SYS ASSIGNMENT7)
(A.) Not
Used(B.)
Temporary
Memory
Status(C.)
Automatic
Line Access
With Single
Digit Code(D.) LED
Indication
for Incoming
DISA Call(E.) SLT
Flash
Operation
0
Program Record Form Entry
1.  Enterdesired option number in each features column.
System Program Entry
1.  Enter 64 (program number).
2.  Press *.
3.  Enter data from columns A-E.
4.  Press *.
5.  Press # to exit the program.
(A.) Message Edit Mode
0=phones dial pad 1 key has Q_Z printed
above it, 1=phones dial pad 1 key has no
letters indicated
(B.) Caller ID Indication
0=not displayed, 1=displayed
(C.) Edit Caller ID Table
0=disabled, 1=enabled
(D.) SMDR Prints Outgoing Information
0=printed out, 1=not printed out
(E.) Door Box Restricted
 0=enabled, 1=disabled
Options
(A.) Not Used
Must be entered as 0
(B.) Temporary Memory Status
0=not displayed, 1=displayed
(C.) Automatic Line Access With Single Digit
Code
0=lowest line number available, 1=highest line
number available, 2=rotating lines (line 1, then
line 2, then line 3, etc.)
(D.) LED Indication for Incoming DISA Call
0=incoming DISA calls show busy LED,
1=incoming DISA calls flash like an incoming call
(E.) SLT Flash Operation
0=enabled, 1=disabled
Options
- 42 -