Nitsuko Portrait 308/824 Program Record Form Manual

PORTRAIT
Program Record
Form
ol-cov.qxd  8/12/96 2:06 PM  Page 1
/ 

lIn Edit îPreferences îGeneral, set the following:
–Default Magnification= Fit Width
–Display Splash Screen at Startup= Disabled (box not checked)
–Display Open Dialog Box at Startup= Disabled (box not checked)
lFor easiest reading on-screen, select ViewîFit Width(or Ctrl K). This option
is automatically enabled if you set the 
Default Magnificationin General
Preferences as described above.
lTo return to the opening screen at any time, press Home.
To scroll up or down on a page, press PageDownor PageUp....

lProvides on-line viewing and printing.
lExtensive search and navigation capabilities.
lEnsures more timely turnaround of documents.
lWhen we provide an Acrobat manual with a product (e.g., Nitsuko TAPI Driver),
you are assured of having the most up-to-date manual available.
lWith the installation of a PC fax/modem, it makes faxing of any brochure, user
guide, proposal or manual quick and easy.
lAcrobat Reader programs for Macintosh, DOS and UNIX platforms also can be
provided, if required.
lFor...

Table of Contents
Program 1 - Line Options (1)
Program 2 - Line Group Assignment
Program 3 - Line Options (2)
Program 4 - Extension Options (1)
Program 5 - Unsupervised Conference Port
Program 6 - Outgoing Line Access
Program 7 - Incoming Line Access/Audible
Program 8 - Extension Options (2)
Program 9 - Executive Call Forward
Program 10 - Dual Handsfree Hotline
Program 11 - Hunt Groups
Program 12 - Door Chime Box
Program 13  - Extension Options (3)
Program 14 - Flexible Station Numbering
Program 15  -...

Program 25 - Call Duration Timer
Program 26 - Flash Timer
Program 27 - SMDR Timer
Program 28 - Call Forward Transfer Timer
Program 29 - Attendant Reverting
Program 30 - Voice Message Timer
Program 31 - Line to Line Cut-Off Timer
Program 32 - DTMF Receiver Release Timer
Program 33 - LND/Repeat Dial Timer
Program 34 - Repeat Dial
Program 35 - Class of Service
Program 36 - Permitted Codes
Program 37 - COS 3, Allowed Number of Dialed Digits
Program 38 - PBX/Centrex Access Codes
Program 39 - Common...

Program 52 - Tenant Options
Program 53 - Tenant Speed Dial
Program 54 - Tenant Attendant
Program 55 - Park Key Assignment
Program 56 - Relay Assignment
Program 57 - SMDR Options (1)
Program 58 - SMDR Options (2)
Program 59 - SMDR Printout Digit
Program 60 - Loop Disconnect Detection Timer
Program 61 - Extension Options (4)
Program 64 - System Options (7)
Program 65 - Voice Mail Port
Program 66 - DISA Timers
Program 67 - Fax Assignment (1) (Portrait 308 Only)
Program 68 - Fax Assignment (2) (Portrait 308...

Portrait 308/824
Program Record Form
Part No. 82400PRF02
Issue 1-0, October 1998
Printed in U.S.A. 

This manual has been developed by Nitsuko America.  It is intended for the use of
its customers and service personnel and should be read in its entirety before
attempting to install or program the system.  Any comments or suggestions for
improving this manual would be appreciated.  Forward your remarks to:
                                      Nitsuko America, Telecom Division
                                                    4 Forest Parkway
                                                   Shelton,...

Program 1 - Line Options (1)(Display  shows:  LINE ASSIGNMENT1)
Line #(A.) Line
Type(B.) Dial
Mode(C.) Queue
Group(D.) PBX
Night Mode(E.) Not
Used
01 0
02 0
03 0
04 0
05 0
06 0
07 0
08 0
Program Record Form EntryOptions
1.  Enter desired option number in each(A.) Line Type
     features column.0=Not connected, 1=CO line,
3=PBX line
System Program Entry
1.  Enter 01 (program number).(B.) Dial Mode
2.  Press *.0=DP, 1=DTMF
3.  Enter line number.
4.  Press *.(C.) Queue Group
5.  Enter data from columns...

Program 2 - Line Group Assignment(Display shows:  LINE GROUPS)
Line Group
#(A.) Lowest
Line #  in
Group(B.) Highest
Line #  in
GroupLine Group
#(A.) Lowest
Line #  in
Group(B.) Highest
Line #  in
Group
01 16
02 17
03 18
04 19
05 20
06 21
07 22
08 23
09 24
10 25
11 26
12 27
13 28
14 29
15 30
Program Record Form EntryOptions
1.  Enter the lowest and highest line numbers(A.) Lowest Line Number in Group
     to be assigned in each line group.Line numbers:  01-system maximum
(B.) Highest Line Number in Group...