Nitsuko Portrait 308/824 Program Record Form Manual

Program 13  - Extension Options (3)(Display  shows:  STN ASSIGNMENT3)
Extension
Port #(A.)
Confirm.
Tone(B.) Do Not
Disturb(C.) Alarm
Audible(D.) Voice
Announce
Device Port(E.)      
Terminal
Connection
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
Options
(A.) Confirmation Tone
0=enabled, 1=disabled
(B.) Do Not Disturb
0=disabled, 1=incoming CO
calls blocked, 2=CO and
ICM calls blocked, 3=CO
and ICM calls blocked or
CO calls blocked and ICM
calls allowed
(C.) Alarm Audible...

Program 14 - Flexible Station Numbering(Display  shows:  FLEX.STA.#ING)
Extension
Port #(A.)
Extension
Number
Assigned to
Port(B.) Number
Plan
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
Options
(A.) Extension Number Port Assignment
10-79 = 2-digit number plan extensions,
110-799 = 3-digit number plan extensions
(B.) Number Plan
002 = 2-digit number plan assignment,
003 = 3-digit number plan assignment
Program Record Form Entry
1.  Enter the extension numbers to
     be...

Program 15  - System Options (1)(Display  shows:  SYS ASSIGNMENT1)
(A.) Flexible
Line
Appearance(B.) Night
Transfer(C.)
Automatic
Line Access(D.)
Exclusive
Hold(E.) Single
Step Access
Program Record Form Entry
1.  Enter desired option number in each
     features column.
System Program Entry
1.  Enter 15 (program number).
2.  Press *.
3.  Enter the data from columns A-E.
4.  Press *.
5.  Press # to exit the program.
Program 16  - System Options (2)(Display  shows:  SYS ASSIGNMENT2)
(A.) Ringing
Line...

Program 17  - System Options (3)(Display  shows:  SYS ASSIGNMENT3)
(A.) Dial
Pulse
Sender
Speed(B.)
Make/Break
Ratio(C.) DTMF
Duration(D.) Storage
Quantity of
Speed Dial(E.)
Existence of
Attendant
for DISA
Program Record Form Entry
1.  Enter desired option number in each features column.
System Program Entry
1.  Enter 17 (program number).
2.  Press *.
3.  Enter the data from columns A-E.
4.  Press *.
5.  Press # to exit the program.
Program 18  - System Options (4)(Display  shows:  SYS ASSIGNMENT4)
(A.)...

Program 19  - System Options (5)(Display  shows:  SYS ASSIGNMENT5)
(A.) All Call
to External
Zone   (B.)  
Intercom
Signaling(C.)
Microphone
On/Off(D.) Room
Monitor(E.) Not
Used
0
Program Record Form Entry
1.  Enter desired option number in each features column.
System Program Entry
1.  Enter 19 (program number).
2.  Press *.
3.  Enter the data from columns A-E.
4.  Press *.
5.  Press # to exit the program.
Program 20  - System Options (6)(Display  shows:  SYS ASSIGNMENT6)
(A.) Door
Chime Tone...

Program 21  - Exclusive Hold Timers(Display  shows:  EXC.HOLD TIMERS)
(1.) Recall
Start Time(2.) Recall
Signal
Duration
Time
Program Record Form Entry
1.  Enter desired option number in each features column.
System Program Entry
1.  Enter 21 (program number).
2.  Press *.
3.  Enter the option number to be programmed (1 or 2).
4.  Press *.
5.  Enter the value for the option being programmed.
6.  Press *.
7.  If the first option number entered was 1, you can enter the value for option number 2 OR...

Program 23 - Unscreened Transfer Recall(Display  shows:  UNANN.XFER TIMER)
Unscreened
Transfer
Recall
Timer
Program Record Form Entry
1.  Enter desired value for the timer.
System Program Entry
1.  Enter 23 (program number).
2.  Press *.
3.  Enter the value for the timer.
4.  Press *.
5.  Press # to exit the program.
Program 24  - Screened Transfer Recall(Display  shows:  ANND XFER TIMER)
Screened
Transfer
Timer
Program Record Form Entry
1.  Enter desired value for the timer.
System Program Entry
1....

Program 25 - Call Duration Timer(Display  shows:  CALL DUR. START)
 Call
Duration
Timer
Program Record Form Entry
1.  Enter desired value for the timer.
System Program Entry
1.  Enter 25 (program number).
2.  Press *.
3.  Enter the value for the timer.
4.  Press *.
5.  Press # to exit the program.
Program 26 - Flash Timer(Display  shows:  FLASH TIMER)
(1.) CO Line
Flash Timer(2.) PBX/
Centrex
Line Flas h
Timer
Program Record Form Entry
1.  Enter desired option number in each features column.
System...

Program 27 - SMDR Timer(Display  shows:  SMDR TIMERS)
(1.) Call
Duration
Timer(2.) Call
Start Timer
Program Record Form Entry
1.  Enter desired option number in each features column.
System Program Entry
1.  Enter 27 (program number).
2.  Press *.
3.  Enter the value for the Call Duration Timer.
4.  Press *.
5.  Enter the value for the Call Start Timer.
6.  Press *.
7.  Press # to exit the program.
Program 28 - Call Forward Transfer Timer(Display  shows:  DELAY RING TIMER)
Call
Forward
Transfer
Timer...

Program 29 - Attendant Reverting(Display  shows:  ATT.REVERT TIMER)
Attendant 
Revert 
Timer
Program Record Form Entry
1.  Enter desired value for the timer.
System Program Entry
1.  Enter 29 (program number).
2.  Press *.
3.  Enter the value for the timer.
4.  Press *.
5.  Press # to exit the program.
Program 30 - Voice Message Timer(Display  shows:  ANN.TIMERS)
(1.)
Automatic 
Answering
Timer(2.) Dial
Tone Sent
Timer
Program Record Form Entry
1.  Enter desired option number in each features column....