Nitsuko Portrait 308/824 Program Record Form Manual

Program 65  - Voice Mail Port(Display  shows: VOICE MAIL PORT)
Voice Mail Port(s)
Program Record Form Entry
1.  Enter the port number(s) to be assigned to the voice mail.
System Program Entry
1.  Enter 65 (program number).
2.  Press *.
3.  Enter the port to be assigned to the voice mail.
4.  Press *.
5.  Enter the next port to be assigned OR Press # to exit the program.
Program 66 - DISA Timers(Display  shows:  DISA TIMERS)
(1.)
Automatic
Answer
Time(2.) Dial    
Waiting 
Time(3.)
Extension
Calling
Time...

Program 67 - Fax Assignment (1) (Portrait 308 Only)(Display  shows: FAX ASSIGNMENT1)
(1.) Line
Number(2.) Station
Port
Program Record Form Entry
1.  Enter the line number and station port to be assigned to the
     fax machine.
System Program Entry
1.  Enter 67 (program number).
2.  Press *.
3.  Enter the line number to be assigned.
4.  Press *.
5.  Enter the station port to be assigned.
6.  Press *.
7.  Press # to exit the program.
Program 68 - Fax Assignment (2) (Portrait 308 Only)(Display  shows: FAX...

Program 69 - Fax Assignment (3) (Portrait 308 Only)(Display  shows: FAX ASSIGNMENT3)
(1.)
Automatic
Answer(2.) Waiting
Time for
CNG Signal
Detection(3.) Waiting
Time for
DTMF
Signal
Receiving(4.) Calling
Time for
Telephone /
Fax
Program Record Form Entry
1.  Enter the desired option number in each features column.
System Program Entry
1.  Enter 69 (program number).
2.  Press *.
3.  Enter the data from column 1 OR Press * to advance to the
     desired option, then enter data.
4.  Press *.
5.  Enter the...

Program 75 - Extension Options (5)(Display  shows: STN ASSIGNMENT5)
(A.) Not
Used(B.) Not
Used(C.)
Automatic
Line Seizing
by Fax(D.) Not
Used(E.) Not
Used
00 00
Program Record Form Entry
1.  Enter the desired option number in each features column.
System Program Entry
1.  Enter 75 (program number).
2.  Press *.
3.  Enter the station port to be programmed.
4.  Enter the data from columns A-E.
5.  Press *.
6.  Enter the data for the next station OR Press * to advance the
     station port numbers OR Press...

Program 86 - Line Options (3)(Display  shows: LINE ASSIGNMENT3)
(A.) Loop
Disconnect
Detection(B.) Not
Used(B.) Not
Used(D.) Not
Used(E.) Not
Used
0000
Program Record Form Entry
1.  Enter the desired option number in each features column.
System Program Entry
1.  Enter 86 (program number).
2.  Press *.
3.  Enter the line number to be programmed.
4.  Enter the data from columns A-E.
5.  Press *.
6.  Enter the data for the next line OR Press * to advance the
     line numbers OR Press # to exit the...

Program 88 - Door Relay Timer(Display  shows: DOOR RELAY TIMER)
Door Relay
Timer
Program Record Form Entry
1.  Enter the value to be used for the timer.
System Program Entry
1.  Enter 88 (program number).
2.  Press *.
3.  Enter the value to be used for the timer.
4.  Press *.
5.  Press # to exit the program.
Program 89 - CO Dial Tone Delay Timer(Display  shows: DIAL WAIT TIMER)
CO Dial
Tone Delay
Timer
Program Record Form Entry
1.  Enter the value to be used for the timer.
System Program Entry
1.  Enter...

Program 92 - Program Entry Password(Display  shows: SYS.PRG.PASSWORD)
New    Password
Program Record Form Entry
1.  Enter the new system password (8 digits maximum).
System Program Entry
1.  Enter 92 (program number).
2.  Press *.
3.  Enter the new system password.
4.  Press *.
5.  Press # to exit the program.
Program 95 - Sub-CPU Timers(Display  shows: SUB CPU TIMERS)
(1.) Flash
Detect
Timer for
SLTs(2.)
Incoming
Guard
Timer for
SLTs(3.) Call
Abandon
Detect
Timer for
SLTs
Program Record Form Entry
1....

- 50 - 

Nitsuko America, Telecom Division
4 Forest Parkway
Shelton, CT  06484
TEL: 203-926-5400
FAX: 203-929-0535
Other Important Telephone Numbers
Sales: ...................................................................
Customer Service:................................................
Customer Service FAX:........................................
Technical Service: ...............................................
Discontinued Product Service: ............................
Technical...