Nitsuko Portrait 308/824 Program Record Form Manual

Program 3 - Line Options (2)(Display shows:  LINE ASSIGNMENT2)
Line #(A.) DISA
Line(B.) DISA
Access
Mode(C.)
Common
Line U s e(D.) Non-
Restricted
Line(E.) Caller
ID
01
02
03
04
05
06
07
08
Program Record Form EntryOptions
1.  Enter desired option number in each(A.) DISA Line
     features column.0=disabled, 1=enabled
System Program Entry(B.) DISA Line Access Mode
1.  Enter 03 (program number).0=no access, 1=day mode, 2=night mode,
2.  Press *.3=day and night mode
3.  Enter line number.
4.  Press *.(C.)...

Program 4 - Extension Options (1)(Display shows:  STN ASSIGNMENT1)
Extension
Port #(A.)
Executive
Override(B.) CO
Off-Hook
Signaling(C.)
Intercom
Off-Hook
Signaling(D.)
Intercom
Signal Call(E.) Headset
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
Options
(A.) Executive Override
0=not allowed, 1=allowed
with tone, 2=allowed
without tone
(B.) CO Off-Hook Signaling
0=disabled, 1=enabled
(C.) Intercom Off-Hook Signaling
0=disabled, 1=manually
sent when busy, 2=automatically sent...

Program 5 - Unsupervised Conference Port(Display shows:  UNSUP.CONF.PORT)
Circuit
NumberExtension
Port #
01
02
03
04
Program Record Form Entry
1.  Enter desired extension port for each Unsupervised
     Conference circuit.
1.  Enter 05 (program number).
2.  Press *.
3.  Enter extension port number to be assigned to the
     first Unsupervised Conference circuit.
4.  Press *.
5.  Enter the extension port to be assigned to the next
     circuit number OR
     Press * to advance to another circuit number...

Program 6 - Outgoing Line Access(Display shows:  OUTGOING CO ACC.)
Extension
Port #(A.) Line
Group #1(B.) Line
Group #2
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
Options
(A.) Outgoing Line Group #1
00=no group assigned, 01-30=groups 1-30
(B.) Outgoing Line Group #2
00=no group assigned, 01-30=groups 1-30
Program Record Form Entry
1.  Enter the outgoing line group numbers
     (1 and 2) to be assigned to each
     extension.
System Program Entry
1.  Enter 06 (program...

Program 7 - Incoming Line Access/Audible(Display shows:  INC.LINE ACC/AUD)
Extension
Port #(A.) Line
Group #1(B.) Ring
Type for
Line Group
#1(C.) Line
Group #2(D.) Ring
Type for
Line Group
#2
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
Options
(A.) Incoming Line Group #1
Enter first line group number [00=no
group assigned, 01-30=groups 1-30]
(B.) Ring Type for Line Group #1
0=no ringing, 1=day ringing, 2=night ringing,
3=day and night ringing
(C.) Incoming Line Group #2
Enter...

Program 8 - Extension Options (2)(Display  shows:  STN ASSIGNMENT2)
Extension
Port #(A.)
Instrument
Type(B.) SLT
Dial Plan(C.) Internal
Page Zone(D.) Tenant
Group(E.) Park
Group
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
Program Record Form Entry
1.  Enter the desired
     option number in each
     features column.
System Program Entry
1.  Enter 08 (program
     number).
2.  Press *.
3.  Enter extension port
     number to be
     programmed.
4.  Press *.
5.  Enter data...

Program 9 - Executive Call Forward(Display  shows:  EXEC. CALL FWD)
Executive 
Call
Forward
Pair(A.)
Executive
Extension
Port #(B.)
Secretary
Extension
Port #
1
2
3
4
5
6
7
8
Program Record Form Entry
1.  Enter the extensions for the executive and secretary pairs.
System Program Entry
1.  Enter 09 (program number).
2.  Press *.
3.  Enter the data from column A.
4.  Press *.
5.  Enter data from column B.
6.  Press *.
7.  Next Call Forwarding Pair number displays.  Repeat steps 3-6 OR
     Press * to...

Program 10 - Dual Handsfree Hotline(Display  shows:  DUAL HF HOTLINE)
Dual HF
Hotline Pair(A.)
Secretary
Extension
Port #(B.) 
Executive 
#1   
Extension
Port # (C.)
Executive 
#2  
Extension
Port #
1
2
3
4
Program Record Form Entry
1.  Enter the extensions for the executive and secretary pairs.
System Program Entry
1.  Enter 10 (program number).
2.  Press *.
3.  Enter the data from column A.
4.  Press *.
5.  Enter data from column B.
6.  Press *.
7.  Enter data from column C.
8.  Press *.
9.  Enter next...

Program 11 - Hunt Groups(Display  shows:  HUNT GROUPS)
Ext. # in
Hunt GroupHunt Group
0Hunt Group
1Hunt Group
2Hunt Group
3Hunt Group
4
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Program Record Form Entry
1.  Enter the extensions to be assigned to each Hunt Group.
System Program Entry
1.  Enter 11 (program number).
2.  Press *.
3.  Enter the Hunt Group number (0-4) to be programmed.
4.  Press *.
5.  Enter the first extension port for that particular Hunt Group.
6.  Press *.
7.  Continue entering extension...

Program 12 - Door Chime Box(Display  shows:  DOOR CHIME BOX)
Door Box   
#1(A.)
Extension #(B.) Ring
TypeDoor Box  
#2(A.)
Extension #(B.) Ring
Type
11
22
33
44
55
66
77
88
99
10 10
Program Record Form Entry
1.  Enter the required extensions for each Door Box
     and assign the ring type each extension
     should receive.
System Program Entry
1.  Enter 12 (program number).
2.  Press *.
3.  Enter the Door Box number (1 or 2) to be programmed.
4.  Press *.
5.  Enter the first extension port to be...