Nitsuko Portrait 308/824 Program Record Form Manual

Program 31 - Line to Line Cut-Off Timer(Display  shows:  LN.TO LN.TIMERS)
(1.) Path
Connection
Waiting
Timer(2.)
Warning
Tone Timer
for Conv.
Cut-Off
Program Record Form Entry
1.  Enter desired option number in each features column.
System Program Entry
1.  Enter 31 (program number).
2.  Press *.
3.  Enter the option number (1 or 2) for the timer to be programmed.
4.  Press *.
5.  Enter the value for the timer being programmed.
6.  Press *.
7.  If the first option number entered was 1, you can enter the...

Program 33 - LND/Repeat Dial Timer(Display  shows:  LINE DROP TIMER)
  LND/
Repeat Dial
Timer
Program Record Form Entry
1.  Enter desired value for the timer.
System Program Entry
1.  Enter 33 (program number).
2.  Press *.
3.  Enter the value for the timer.
4.  Press *.
5.  Press # to exit the program.
Program 34 - Repeat Dial(Display  shows:  REP.DIAL.TIMES)
(1.) Waiting
Time
Between
Recall(2.) Calling
Time(3.) Number
of Times
Redialed
Program Record Form Entry
1.  Enter desired value for the counter....

Program 35 - Class of Service(Display  shows:  CLASS OF SERVICE)
Extension
Port #(A.) Day
Mode(B.) Night
Mode(C.) Dial
Block Class
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
1.  Enter 35 (program number).
2.  Press *.
3.  Enter the extension port to be programmed.
4.  Press *.
5.  Enter data from columns A-C.
6.  Press *.
7.  Enter the data for the next extension port
     displayed OR
     Press * to skip the displayed extension
     port OR
     Press # to exit program....

Program 36 - Permitted Codes(Display  shows:  PERMITTED CODES)
Permitted
Code #Permitted
Codes
01
02
03
04
05
06
07
08
09
10
11
12
Program Record Form Entry
1.  For each Permitted Code, program up to the first 8 digits of an allowed telephone number.  Use DC
     as a Dont Care digit within the 8 digits if it doesnt matter what number is dialed.
System Program Entry
1.  Enter 36 (program number).
2.  Press *.
3.  Enter the Permitted Code number (01-12) to be programmed.
4.  Press *.
5.  Enter the value...

Program 37 - COS 3  Allowed Number of Dialed Digits(Display  shows:  DIGIT LIMIT COS3)
Allowed
Number of
Dialed
Digits
Program Record Form Entry
1.  Enter desired value for this option.
System Program Entry
1.  Enter 37 (program number).
2.  Press *.
3.  Enter the value for the option.
4.  Press *.
5.  Press # to exit the program.
Program 38 - PBX/Centrex Access Codes(Display  shows:  PBX ACCESS CODES)
PBX/
Centrex
Access
Code #PBX/
Centrex
Access
Codes
1
2
3
4
Program Record Form Entry
1.  For each...

Program 39 - Common Unrestricted Codes(Display  shows:  COMM.UNRESTRICT)
Common
Unrestricted
Code #Common
Unrestricted
Codes
1
2
3
4
Program Record Form Entry
1.  For each Common Unrestricted Code number, assign an access code digit (4 digits maximum).
System Program Entry
1.  Enter 39 (program number).
2.  Press *.
3.  Enter the Common Unrestricted Code number (1-4) to be programmed.
4.  Press *.
5.  Enter the value for the code being programmed.
6.  Press *.
7.  Enter the value for the next Common...

Program 41 - COS 2 and 3, Restricted Codes   (Display  shows:  RESTR. CODES D2)
Restricted
Code #Restricted
Code
1
2
3
4
5
6
7
8
Program Record Form Entry
1.  For each Restricted Code number, enter the digits to be assigned to the code number (2 digits maximum).
System Program Entry
1.  Enter 41 (program number).
2.  Press *.
3.  Enter the Restricted Code number (1-8) to be programmed.
4.  Press *.
5.  Enter the value for the code being programmed.
6.  Press *.
7.  Enter the value for the next Restricted...

Program 42 - Walking COS Security Code(Display  shows:  UNREST.SEC.CODES)
Security
Code #Security
CodeSecurity
Code #Security
Code
01 16
02 17
03 18
04 19
05 20
06 21
07 22
08 23
09 24
10 25
11 26
12 27
13 28
14 29
15 30
Program Record Form Entry
1. For each Security Code number, enter the digits to be assigned to the code
System Program Entry
1.  Enter 42 (program number).
2.  Press *.
3.  Enter the Security Code number (01-30) to be programmed.
4.  Press *.
5.  Enter the value for the code being...

Program 43-COS Assignment on Security Code(Display  shows:  UNREST.CLASS)
Security
Code #Class of
ServiceSecurity
Code #Class of
Service
01 16
02 17
03 18
04 19
05 20
06 21
07 22
08 23
09 24
10 25
11 26
12 27
13 28
14 29
15 30
Program Record Form Entry
1.  For each Walking Class Security Code number,
     enter a Class of Service to be assigned to the code.
System Program Entry
1.  Enter 43 (program number).
2.  Press *.
3.  Enter the Security Code number (01-30) to be programmed.
4.  Press *.
5.  Enter...

Program 44 - External Alarm Sensor(Display  shows:  ALARM SENSOR)
 Alarm #(A.) Alarm
Installed?(B.) Alarm
Trigger
Condition
1
2
Program Record Form Entry
1.  Enter desired option number in each features column.
System Program Entry
1.  Enter 44 (program number).
2.  Press *.
3.  Enter the alarm number to be programmed.
4.  Press *.
5.  Enter the value from column A for the alarm being programmed.
6.  Press *.
7.  Enter the value from column B for the alarm being programmed.
8.  Press *.
9.  If the first...