Nitsuko Onyx Vsi Multibutton Telephone Feature Handbook

7RWUDQVIHUWKHFDOO\RXDUH
RQXVLQJD+RWOLQHNH\(Do Not Hang Up.) 
1.Press the Hotline key. 
-If your partner doesn’t answer, you can
press another Hotline key instead of
going to step 2.
2.(or wait for an answer.
7RDQVZHUDFDOOIURP\RXU
+RWOLQHSDUWQHU( 
[ flashes.) 
If you are not an attendant... 
1.Listen for two beeps. 
2.Speak toward the phone.
If you are an attendant... 
1.)
2.Press 
S (Intercom loop key).
Intrusion (Barge-In)
Intrusion allows you to break into another conversation....

2.Wait about four seconds, your display will
show Conference Call. 
-You and the other two parties are in
Conference.
Last Number Redial
)This feature is always available.
With Last Number Redial, you can easily call the last outside number
you dialed. Each time you place an outside call, the system saves the
number you dialed (up to 24 digits). You can redial the call whether it
was answered, unanswered or busy. Redial uses the same line to dial out
unless you select a different line....

2.Dial C. 
-Busy tone stops. 
3.(
-Use your phone for other calls while
you wait for Callback to ring you back.
7RUHTXHVWD&DOOEDFNDIWHU
GLDOLQJDFRGHIRUDQ
RXWVLGHOLQH1.Dial C and 
(
-You can use your phone for other calls
while you wait for Callback to ring you
back.
7RDQVZHUZKHQ&DOOEDFN
ULQJV\RXEDFN1.)
-You hear dial tone on the line you
requested. 
2.Place call.
7RFDQFHOD&DOOEDFN
UHTXHVWWRDVSHFLILFOLQH1.Try to access busy line again. 
-You hear busy tone. 
2.Press 
* and hang...

7RVHWXSD0HHW0H
&RQIHUHQFH1.Page desired parties and announce Meet-
Me Conference code (11 or 12). 
2.Press 
[. 
3.Dial Meet-Me Conference access code.
7RMRLQD0HHW0H
&RQIHUHQFH1.) and press 
[. 
2.Dial announced Meet-Me Conference ac-
cess code (11 or 12). 
-The display shows Conference Call
when the three parties join the Meet-Me
Conference.
Message Waiting
You can leave a Message Waiting indication at a busy or unanswered
extension requesting a return call. The indication is a flashing 
w...

7RDQVZHUD0HVVDJH
:DLWLQJOHIWDW\RXU
H[WHQVLRQ(Your MW key flashes fast.) 
1.) and press 
F. 
-The system calls the extension that left
you the message. Your MW key
continues to flash if you have additional
Messages Waiting. 
7RVHOHFWWKHPHVVDJH\RX
ZDQWWRDQVZHUIURP\RXU
GLVSOD\SKRQH(Do not lift handset.) 
1.Press 
F. 
-Your display shows the extension which
left you the message. Press FLASH
again until you see the message you
want to answer. 
2.)
3.Press 
F. 
-The system calls the...

7RDFWLYDWH0LFURSKRQH
0XWH1.Press 
M. 
-You can do this while on a call or when
your phone is idle (to turn off
Handsfree reply to a voice-announced
call).
7RGHDFWLYDWH0LFURSKRQH
0XWH1.Press 
m. 
Monitor
Monitor allows you to listen to somebody else’s phone conversation,
without them hearing you or knowing you are on the line. When you
monitor someone on an outside call, you hear both parties. However,
when you monitor someone on an inside call, you only hear their caller.
You cannot Monitor a...

7RSODFHWKHV\VWHPLQ
1LJKW$QVZHUDWWHQGDQWV
RQO\1.Press 
N. 
-The DND key flashes. Your display
shows, NIGHT MODE ON.
7RWDNHWKHV\VWHPRXWRI
1LJKW$QVZHUDWWHQGDQWV
RQO\1.Press 
n. 
-The DND key goes out. Your display
shows, NIGHT MODE OFF.
8VHU3URJUDPPDEOH
)HDWXUHYou can change the lines that ring your phone
at night. Refer to Night Ring in
User-Programmable Features (see page 85).
7RDQVZHUDFDOOGXULQJ
1LJKW$QVZHU(You can program this on a One-Touch Speed
Dial key. See page 63.)...

8VHU3URJUDPPDEOH
)HDWXUHYou can allow or deny Voice Over for your
extension. Refer to Voice Over in
User-Programmable Features (page 85).
Voice Over 
7RUHVSRQGWRD9RLFH2YHU
VLJQDO(You hear two beeps before your caller’s
voice.) 
1.Press and hold 
M. 
-To talk to the first party, release MIC.
7RVLJQDODQRIIKRRN
H[WHQVLRQ1.)
2.Use DSS or Hotline. 
-If the called party is busy on a handset
call and you press a DSS or Hotline
key, Off-Hook Signaling is automatic. If
the called party is busy on a...

Operator Assistance
Operator Assistance (OPA) automatically answers outside calls and
provides dialing options to the outside callers. OPA lets an outside caller
dial an extension or hunt group directly. You or a co-worker do not have
to screen the call.
When OPA answers a call, the caller hears a recording of their dialing
options. For example, the announcement could say, Hello. You have
reached XYZ Corporation. Dial 4 for Technical Service or 5 for Sales.
You may be able to record the messages callers...

-Your communications manager can tell
you about the messages. 
5.(
7RHUDVHDOO23$PHVVDJHV
LQFOXGLQJWKH$&RYHUIORZ
PHVVDJH1.)
2.Press 
[ and press 
#. 
3.Dial MV. 
4.Press 
#. 
5.Dial Y. 
-To exit the procedure without erasing
the messages, dial N. 
6.(
7RFDOOLQWRWKHV\VWHP
XVLQJ2SHUDWRU$VVLVWDQFH1.Dial system telephone number.
2.After OPA answers, dial announced option:
Dial single-digit option.
OR
Dial 
3 plus the extension you wish to
reach.
Page, Zone
You can make an announcement (Page)...