Nitsuko Digital System Administrators Guide

Whisper Page (VO)
 Use this option to determine whether a Multibutton extension receives Whisper
Page.  This option does not apply to attendant extensions (attendants do not receive
Whisper Page).  Disable Whisper Page for extensions in Circular or Terminal Hunt
Groups.
The chart below shows you how Off-Hook Ringing (Program 18 [I]) and Whisper
Page (VO) programming interact when the caller is using the handset or Handsfree
and the person receiving the Off-Hook Signaling (Dest.) is using the handset or...

Filling Out the Program Record Form
For Day/Night Ring Assignment (RA), Night Ringing (NR), Delayed Ring
Assignment (DRA), Prime Line Assignment (PLA):
1.Select a feature (e.g., RA). 
In this box . . .Enter this data . . .
Line (01-16) Y - enable feature for the line
N - disable feature for the line
For Direct Station Selection (DSS) and Call Coverage:
In this box . . .Enter this data . . .
Key Extension to be called (300-347)
For Headset (HS), Voice-Announced Calls (VA), Voice Page Thru Speaker
(VP),...

For System Speed Dial (SD):
Across from this heading . . .Enter this data . . .
Bin Complete the bin number (70-79
or 700-799), then enter the
telephone number, up to 32 digits
(when a number is longer than 16
digits, record digits 17-32 in the
next consecutive bin)
Example 
In an 8-Line system, extension 307 has immediate Day/Night ringing on lines 1-5
(no other options will be shown).
Entering Data Into Memory
To enter Program 18 data
for RA, NR, DRA, PLA:
1.Enter the program mode. 
-Press # + dial SP...

To enter Program 18 data
for DSS (or Call
Coverage) and Hotline:
1.Enter the program mode. 
-Press # + dial SP + dial 5312 + press #.
2.Press key 18 (CONF key) to enter Program 18. 
3.Dial ext. number, press #. 
4.Dial DSS or HL, press #. DSS keys (1-15), any Call
Coverage and Hotline keys flash. 
5.Press a flashing key. 
6.To accept the displayed data:
Press #. 
OR
To change or enter data:  Dial data, press #. 
7.Repeat steps 5-6 for all keys. 
8.Select an option:
To program another extension for DSS or...

To enter Program 18 data
for SD: 
1.Enter the program mode. 
-Press # + dial SP + dial 5312 + press #. 
2.Press key 18 (CONF key) to enter Program 18.
3.Dial extension number, press #. 
-For System Speed Dial, dial the number of the
extension you are programming from. 
4.Dial SD, press #. 
5.Press a lit One-Touch Personal Speed Dial key or (Dial
Personal bins 50-59 or 20-29, press #). 
OR
Dial System Speed Dial bin, press #. 
-You make One-Touch Speed Dial keys using
Program 17.
6.If you can store a...

9.Select an option:
To program more bins:  Go to step 5.
OR
To program another feature: Press SAVE once and go
to step 4 (in any Program 18 procedure).
OR
To program another extension: Press SAVE twice, dial
Y, and go to step 3 (in any Program 18 procedure).
OR
To exit Program 18:  Press SAVE three times. 
OR
To exit the program mode: Press SAVE four times. 
-To enter another program after exiting:  Press its
key.
Understanding Related Programming
For any option in Program 18, Part II: 
Program 15To...

Program 3To enable/disable dial-out of # in a Speed Dial number   
To select the System Speed Dial bin numbers
Program 17To assign Speed Dial keys, if desired
Program 4To set the Dial Tone Detection timer (this sets the time the
system waits for dial tone before sending out a Speed Dial
number or after a stored pause) 
Extension Options Program 18: Extension Features (II)
Part II:  DIGITAL SYSTEM Programs 271 

P rogram 19: Hunt Groups
&
Program 19 is initially set as follows: 
·Circular Hunt Groups = None
·Terminal Hunt Groups = None
·UCD/ACD Hunt Groups = None 
Program 19 lets you set up Hunt Groups for the Extension Hunting feature.  You can
create three types of Hunt Groups:
Circular Hunt Groups 
To make Circular Hunt Groups, place extensions into a group in the order you want a
call to hunt.  Make the first and last extension in the group the same to form the
circle (loop).  An example of a Circular Hunt...

Filling Out the Program Record Form
For Circular and Terminal Groups:
In this box . . .Enter this data . . .
Member Ext. 301-347
Hunt Type 01 - Busy/unanswered outside
calls are sent through the group  
02 - Busy/unanswered outside
and Intercom calls are sent
through the group
03 - Unanswered outside calls
are sent through the group
For UCD/ACD Groups
In this box . . .Enter this data . . .
Hunt Type 04-UCD with no overflow
05-UCD with overflow
Master Ext. 301-347
Overflow Ext. (for type 05) 301-347 (do...

Example 
There is a type 05 ACD group for Sales with Master Ext. 306, Overflow Ext. 307,
Supervisor Ext. 301 and Member Exts. 310, 311, 312, 313.
.
Entering Data Into Memory
To enter Program 19 data
for Circular/Terminal Hunt
(types 01, 02, 03):
1.Enter program mode. 
-Press # + dial SP + dial 5312 + press #. 
2.On a Multibutton phone, press key 19 (MIC/DND key)
to enter Program 19.
3.Dial 01, 02, or 03 to let the system know you want Cir-
cular or Terminal Hunting, not UCD. 
-It doesn’t matter which of...