Nitsuko Digital System Administrators Guide

7.Select an option:
To program another group:  Press # until you see
HUNT TYPE -, then go to step 3 (in any Program 19
procedure).
OR
To exit Program 19:  Press SAVE once.
OR
To exit the program mode:  Press SAVE twice. 
-To enter another program after exiting:  Press its
key.
To delete a member of a
Circular/Terminal Group: 
1.Enter program mode. 
-Press # + dial SP + dial 5312 + #.
2.On a Multibutton phone, press key 19 (MIC/DND key)
to enter Program 19.
3.Dial 01, 02, or 03 to let the system know you...

-For example, if the group is 304, 305, 306 and you
want to add 307 before 306, press # until you see
306. 
6.Dial the extension you want to add, press #.  Dial its
Hunt Type, press #.  Repeat for the extension after it. 
-Using the example, above, do this step for 307, then
306.
7.Press # until you see HUNT TYPE-.
8.Press SAVE until you exit the program mode. 
To enter (or delete)
Program 19 data for
UCD/ACD Hunt Groups
(type 04, 05):
1.Enter program mode. 
-Press # + dial SP + dial 5312 + press #.
2.On...

4.Dial Master Ext. for the Supervisor’s group, press #. 
-You see UCD MEMBER. 
5.Dial Supervisor Ext., press #.
6.Select an option:
To program another Supervisor:  Go to step 3.
OR
To exit Program 19:  Press SAVE.
OR
To exit the program mode:  Press SAVE twice.
-To enter another program after exiting:  Press its
key. 
To delete an ACD
Supervisor:
1.Enter program mode. 
-Press # + dial SP + dial 5312 + press #. 
2.On a Multibutton phone, press key 19 (MIC/DND key)
to enter Program 19.
3.Dial Hunt Type for...

- For your notes -
Program 19: Hunt Groups Extension Options
278 DIGITAL SYSTEM Administrator’s Guide 

Initia lizing the  Sy st em
P rogram 20
&
Program 20 is initially set as follows:
·N/A 
Program 20 automatically assigns the initial (default) value to all the feature options
in Programs 1-19.  To quickly review the initial values of a program, turn to the first
page of that program and refer to the shaded box in the upper left-hand corner.
FOR FEATURE INFORMATION:  N/A
Filling Out the Program Record Form
N/A
Entering Data Into Memory
To use Program 20:1.Enter program mode. 
-Press # + dial SP + dial...

– For your notes –
Program 20 System Initialization
280 DIGITAL SYSTEM Administrator’s Guide 

1+NNX Dialing, Programming Allow/ Deny Tables . . . . . . . . . . . . . . . .  217
500/2500 Sets as Power Failure Telephones . . . . . . . . . . . . . . . . . . . . .  6, 147
6-Digit Analysis, Programming Tables . . . . . . . . . . . . . . . . . . . . . . . . . . .  218
A
Access Level, Extension, Programming . . . . . . . . . . . . . . . . . . . . . . 244 - 246
Access Page Zones 1-3, Programming . . . . . . . . . . . . . . . . . . . . . . . . . . .  199
Account Codes. . . . . . . . . . . . . . . . . . ....

Multiple Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  118 - 119
Authorization Codes, Forced
ARS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Automated Attendant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  185 - 188
See also Operator Assistance
Automatic Call Answering
See Voice Mail
Automatic Call Distribution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  36 - 38
Supervisor...

Call Forwarding at Attendant
See Alternate Attendant
Call Forwarding System Cancel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  47
Call Forwarding, Off Premise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  46
Call Intercept . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  48
Call Park . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141 - 142
Call Pickup
Directed . . ....

Internal Call Forwarding, Programming . . . . . . . . . . . . . . . . . . . 198
Lines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 235
No Flash at ESL, Programming . . . . . . . . . . . . . . . . . . . . . . . . . . 199
Off-Premise Call Forward, Programming . . . . . . . . . . . . . . . . . . 198
Only Intercom Calls at Night, Programming . . . . . . . . . . . . . . . . 197
Only Local Calls (Day or Night), Programming . . . . . . . . . . . . . 198
Only...