Nitsuko 124i/384i Software Manual

Programming (Cont’d)
➣
0406 - COS Options, Item 47: Memo Dial
In an extension’s Class of Service, enable (1) or disable (0) an extension’s ability to use Memo Dial.
➣1005 - Class of Service
Assign a Class Of Service (1-15) to an extension.
➣1006 - Programming Function Keys
Assign a function key for Memo Dial (code 1015).
Related Features
Last Number Redial
Quickly redial the last outside number dialed. 
Save Number Dialed
Save the last outside number dialed.
Single Line Telephones
Memo Dial is not...

Message Waiting
Description
 124i Available. 384i Available.
- Single line telephones can leave and
cancel Messages Waiting. Single line
telephones cannot receive Messages
Waiting.- Single line telephones can leave,
cancel and receive Messages
Waiting. Prior to system software
3.02, single line telephones cannot
receive a Message Waiting
- COS control for reminder messages
requires system software 2.13 Base,
2.18 EXCPRU or higher.- COS control for reminder messages
requires system software 3.04 or...

Programming
➣
0406 - COS Options (Part A), Item 15: Message Waiting
In an extension’s Class of Service, enable (1) or disable (0) an extension’s ability to leave Messages Waiting.
➣0419 COS Options (Part B), Item 3: VAU Reminder Message
Enable (1) or disable (0) the VAU Reminder Messages.
➣1005 - Class of Service
Assign a Class Of Service (1-15) to an extension.
➣(384i Only) 1021 - Hotel Telephone Setup
Enter 1 for this option if Single Line Telephone should be able to receive Messages Waiting.
➣1006 -...

Related Features
Handsfree Answerback/Forced Intercom Ringing
When a user responds to a Message Waiting, the system does not cancel the Message Waiting indication
if the called party uses Handsfree Answerback.  The system cancels the indication only if the called party
lifts the handset or presses SPK.
Programmable Function Key
A Message Waiting key simplifies this feature’s operation.
Single Line Telephones
If the single line set has a Message Waiting lamp, you must install an ASTU/MW PCB and a Message...

Operation (Cont’d)
To cancel the Messages Waiting you have left at a specific extension:
1. At keyset, press idle CALL key.
OR
At single line telephone, lift handset.
2. Dial 871.
3. Dial number of extension you don’t want to have your messages.
4. Press SPK to hang up.
To check your messages:
1. Press CHECK
2. Dial *0. 
You can have any combination of the message types in the table below on your phone.
If you see. . . You have. . .
VOICE MESSAGE
n MESSAGESNew messages in your Voice Mail mailbox
CHECK...

Microphone Cutoff
Description
 124i Available. 384i Available.
Microphone Cutoff lets a keyset user turn off their phone’s handsfree or handset microphone at any time.  When
activated, Microphone Mute prevents the caller from hearing conversations in the user’s work area.  The user
may turn off the microphone while their telephone is idle, busy on a call or ringing.  The microphone stays off
until the user turns it back on.
Conditions
None
Default Setting
•Enabled (using MIC key).
Programming
No YesIn...

Programming (Cont’d)
➣
0406 - COS Options, Item 73: Microphone Cutoff
In an extension’s Class of Service, enable (1) or disable (0) an extension’s ability to use Microphone Cutoff.
➣1005 - Class of Service
Assign a Class Of Service (1-10 in 124i, 1-15 in 384i) to an extension.
➣1006 - Programmable Function Keys
If an extension needs handset microphone cutoff, program a Microphone Cutoff key (code 1026).
Related Features
Handsfree Answerback/Forced Intercom Ringing
Microphone Cutoff does not operate if...

Multiple Directory Numbers / Call Coverage
Description
 124i Available. 384i Available.
- In Base 4.02 and EXCPRU 4.02 and
higher, a Call Coverage key will
flash when the covered extension has
a second call waiting.- In system software 3.07.10 and
higher, a Call Coverage key will
flash when the covered extension has
a second call waiting.
Multiple Directory Numbers let a keyset have more than one extension number.  Calls can route to the keyset’s
installed number or to the keyset’s virtual extension...

Programming
Start
In 0502, assign unused
extension numbers (e.g., 700)
to virtual extension ports (73-96
in 124i, 257-384 in 384i).
Should extension
have function key
appearance for
Multiple Directory
Number?In 1006, assign function key for
Multiple Directory Number
(code 1036 + virtual or covered
ports extension number).In 1006, do not assign
a function key for
Multiple Directory
Number (code 1036).
In 1016, select the
Multiple Directory
Number function key
and enter 1.Should Multiple
Directory Number...

Programming (Cont’d)
Continued
from
previous
page (A).Continued
from
previous
page (B).
Do you want an
extensions Multiple
Directory Number keys to
ring with unique tones?In 1016, select the
Multiple Directory
Number function key
and enter 0.In 1018, assign one of four ring
tones to each extension and
virtual extension port that
appears under a Multiple
Directory Number key.
Do you want to change
the ringing priority of
simultaneous ringing
Multiple Directory
Number calls?
In 1019, change the
priority of...