Netgear D7000 Nighthawk Ac1900 Wifi Vdsl Adsl Modem Router User Manual

							The following figure shows the settings that display when you configure an ADSL connection for the Internet
interface.
12.
Enter the ADSL settings as described in the following table. Manage the Internet Settings Manually
51
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000 
						

							Description
Field
Select LLC-BASED or VC-BASED, as indicated by your ISP.
The m
ultiplexing method can either be virtual circuit (VC) based or logical link control
(LLC) based. This setting does not apply to the IPTV interface.
Note
Multiplexing Method
Enter a number between 0 and 255 for the virtual circuit number for the virtual path
identifier (VPI), as indicated by your ISP.
If your ISP did not provide you with a VPI setting, leave the default setting (8). The
VPI might be required not only for a VC-based connection but also for an LLC-based
connection. This setting does not apply to the IPTV interface.
Note
VPI
Enter a number between 32 and 65535 for the virtual circuit number for the virtual
channel identifier (VCI), as indicated by your ISP.
If your ISP did not provide you with a VCI setting, leave the default setting (35). The
VCI might be required not only for a VC-based connection but also for an LLC-based
connection. This setting does not apply to the IPTV interface.
Note
VCI
Select the Use VLANID check box and enter the VLAN ID, as indicated by your
ISP

.
A VLAN ID might be required if you subscribe to both Internet service and IPTV
service. If your ISP did not provide you with a VLAN ID, leave the Use VLANID
chec

k box cleared, which is the default setting.
Use VLANID
If your ISP provided you with a VLAN ID and a priority value, enter the priority value,
which is a number from 0 to 7.
You can enter a priority value only in combination with a VLAN ID. If your ISP did
not provide you with a priority value, leave the default setting (0).
Priority (0 ~ 7)
This setting is an option that applies to the IPTV interface only.
For information about configuring bridge mode, see Enable Bridge Mode for IPTV
De

vices on page 202.
Br

idge Mode Manage the Internet Settings Manually
52
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000 
						

							Description
Field
Enter the account name, as indicated by your ISP. This name might also be called
the host name.
If your ISP did not provide you with an account name or host name, leave the default
setting.
Account Name
Enter the domain name, as indicated by your ISP.
If your ISP did not provide you with a domain name, leave this field blank.
Domain Name
Internet IP Address or IPTV IP Address (depending on your selection in Step 7)
Y
our ISP uses DHCP to assign your IP address. Your ISP automatically assigns
these addresses.
Get Dynamically from ISP
Enter the IP address, IP subnet mask, and gateway IP address that your ISP
assigned you for static IP address service. The gateway is the ISP router to which
your 
modem router connects.
Use Static IP Address
Enter the IP address, IP subnet mask, and gateway IP address that your ISP
assigned you for IPoA service. The gateway is the ISP router to which your modem
router connects.
Use IP o

ver ATM (IPoA)
Domain Name Server (DNS) Address
The DNS server is used to look up site addresses based on their domain names. Your ISP uses DHCP to assign your DNS servers. Your ISP automatically assigns
this address.
Get Automatically from ISP
If you know that your ISP does not automatically transmit DNS addresses to the
modem router during login, select this option and enter the IP address of your ISP
pr

imary DNS server. If a secondary DNS server address is available, enter it also.
Use These DNS Servers
NAT (Network Address Translation)
NAT allows computers on your home network to share the modem router Internet connection. NAT is enabled by default
because it is required in most situations

. Select the NAT setting:
• Enable
. NAT is enabled. This is the default setting. Leave this setting if no reason to disable NAT exists.
• Disable
. NAT is disabled.
Router MAC Address
The Ethernet MAC address that the modem router uses on the Internet port. Some ISPs register the MAC address of the
netw

ork interface card in your computer when your account is first opened. They accept traffic only from the MAC address
of that computer.
This feature allows your modem router to use your computer’s MAC address (also called cloning). Manage the Internet Settings Manually
53
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000 
						

							Description
Field
Use the default MAC address.
Use Default Address
The modem router captures and uses the MAC address of the computer that you
are no
w using. You must use the one computer that is registered by the ISP.
Use Computer MAC Address
Enter the MAC address that you want to use. By default, the field displays the MAC
address of the Internet port.
Use This MAC Address
DHCP Options
Enter the vendor class identifier (VCI) string, as indicated by your ISP.
If your ISP did not provide you with a VCI string, leave this field blank.
Vendor Class Identifier String (option
60)
Enter the client identifier (client ID) string, as indicated by your ISP.
If your ISP did not provide you with a client ID string, leave this field blank.
Client Identifier String (option 61)
13. Click the Apply button.
Y

our settings are saved.
14. Click the 
Test button to test your Internet connection.
If the NETGEAR website does not display within one minute, see Troubleshoot the Internet Connection on page
279
.
Specify an ADSL Connection With a Login Requirement and
PPPoA or PPPoE Service
If you want to manually configure the ADSL connection settings, use the information that your ISP gave you to log
in and connect to your Internet service. If you cannot find this information, contact your ISP. Entering incorrect
information might prevent the modem router from connecting to the Internet.
The modem router pro

vides a virtual Internet interface and a virtual IPTV interface. In most situations, you only need
to configure the Internet interface. If you use one or more IPTV devices, you might also need to configure the IPTV
interface. Follow the directions that your ISP gave you. If you must configure the IPTV interface, first use the following procedure to configure the
Internet interface. Then, repeat the procedure to configure the IPTV interface.
Note Manage the Internet Settings Manually
54
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000 
						

							To view or specify the settings for an ADSL Internet connection that requires a login and uses a
PPPoE or PPPoA service:
1.
Launch a web browser from a computer or WiFi device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the 
modem router user name and password.
The user name is 
admin. The default password is password. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select Internet.
The Inter

net Setup page displays.
5. From the 
Select Country menu, select the country in which you use the modem router.
The 
Select Country menu is not available in all countries and might be masked out.
6. F
rom the Select Internet Service Provider
 menu, select the Internet service provider (ISP) that you are using.
If your ISP is not in the menu, select Other.
7. Select the vir

tual interface:
• Internet interface. From the menu above the Enable This Interface
 check box, leave the default menu
selection at Internet.
• IPTV interface. From the menu above the Enable This Interface
 check box, select IPTV.
8. From the 
Transfer Mode menu, select ADSL(ATM).
9. From the 
DSL Mode menu, select the ADSL mode that your ISP provided you:
• Auto
. The modem router detects the DSL mode automatically. (This is the default setting.)
• ADSL
. Legacy version of ADSL.
• ADSL2
. Legacy version of ADSL2.
• ADSL2+
. ADSL2+ provides the fastest downstream rates and can interoperate with ADSL2 and ADSL.
10. Specify that your ISP requires you to log in:
•If you are configuring the Internet interface, scroll down to the Does your Internet connection require a login?
section and select the 
Yes radio button.
• If y
ou are configuring the IPTV interface, scroll down to the Does your IPTV connection require a login?
section and select the 
Yes radio button.
11. Mak
e sure that the Enable This Interface check box is selected. Manage the Internet Settings Manually
55
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000 
						

							The following figure shows the settings that display when you configure an ADSL connection for the Internet
interface.
12.
Enter the ADSL settings as described in the following table. Manage the Internet Settings Manually
56
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000 
						

							Description
Field
Select LLC-BASED or VC-BASED, as indicated by your ISP.
The m
ultiplexing method can either be virtual circuit (VC) based or logical link control
(LLC) based. This setting does not apply to the IPTV interface.
Note
Multiplexing Method
Enter a number between 0 and 255 for the virtual circuit number for the virtual path
identifier (VPI), as indicated by your ISP.
If your ISP did not provide you with a VPI setting, leave the default setting (8). The
VPI might be required not only for a VC-based connection but also for an LLC-based
connection. This setting does not apply to the IPTV interface.
Note
VPI
Enter a number between 32 and 65535 for the virtual circuit number for the virtual
channel identifier (VCI), as indicated by your ISP.
If your ISP did not provide you with a VCI setting, leave the default setting (35). The
VCI might be required not only for a VC-based connection but also for an LLC-based
connection. This setting does not apply to the IPTV interface.
Note
VCI
Select the Use VLANID check box and enter the VLAN ID, as indicated by your
ISP

.
A VLAN ID might be required if you subscribe to both Internet service and IPTV
service. If your ISP did not provide you with a VLAN ID, leave the Use VLANID
chec

k box cleared, which is the default setting.
Use VLANID
If your ISP provided you with a VLAN ID and a priority value, enter the priority value,
which is a number from 0 to 7.
You can enter a priority value only in combination with a VLAN ID. If your ISP did
not provide you with a priority value, leave the default setting (0).
Priority (0 ~ 7)
This setting is an option that applies to the IPTV interface only.
For information about configuring bridge mode, see Enable Bridge Mode for IPTV
De

vices on page 202.
Br

idge Mode Manage the Internet Settings Manually
57
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000 
						

							Description
Field
Select the encapsulation, as indicated by your ISP:
•PPPoE (PPP over Ethernet). Your Internet connection uses PPP over Ethernet.
• PPPoA (PPP over ATM). Your Internet connection uses PPP over ATM.
Encapsulation
Enter the login name that y
ou use to log in to your Internet service, as indicated by
your ISP.
This login name is often an email address.
Login
Enter the password that you use to log in to your Internet service, as indicated by
your ISP.
Password
Enter the service name that you use to log in to your Internet service, as indicated
by your ISP.
Often, a service name is not required. This field does not display if your selection from the Encapsulation
menu is PPPoA (PPP over ATM).
Note
Ser

vice Name
Select how the Internet connection functions:
•Always On. Once the Internet connection is established, it remains active. This
is the def

ault setting.
• Dial on Demand. When someone attempts to connect to the Internet, the
Inter

net connection is established. When the idle time-out period expires, the
Internet connection is terminated.
• Manually Connect. You must connect to the Internet manually (see View,
Estab

lish, or Terminate the PPPoE or PPPoA Internet Connection on page 235).
Connection Mode
If you select Dial on Demand from the Connection Mode menu, enter the idle
time-out per

iod in minutes.
The idle time-out specifies how long the modem router keeps the Internet connection
activ

e when no one on the network is using the Internet connection. The default is
5 minutes. To disable the idle time-out, enter 0. (When you disable the idle time-out,
the connection is not terminated automatically).
Idle Timeout (minutes)
Internet IP Address or IPTV IP Address (depending on your selection in Step 7)
Y

our ISP uses DHCP to assign your IP address. Your ISP automatically assigns
these addresses.
Get Dynamically from ISP Manage the Internet Settings Manually
58
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000 
						

							Description
Field
Enter the IP address, IP subnet mask, and gateway IP address that your ISP
assigned you for static IP address service. The gateway is the ISP router to which
your modem router connects.
Use Static IP Address
Domain Name Ser
ver (DNS) Address
The DNS server is used to look up site addresses based on their domain names.
Your ISP uses DHCP to assign your DNS servers. Your ISP automatically assigns
this address.
Get Automatically from ISP
If you know that your ISP does not automatically transmit DNS addresses to the
modem router during login, select this option and enter the IP address of your ISP
pr

imary DNS server. If a secondary DNS server address is available, enter it also.
Use These DNS Servers
NAT (Network Address Translation)
NAT allows computers on your home network to share the modem router Internet connection. NAT is enabled by default
because it is required in most situations

. Select the NAT setting:
• Enable. NAT is enabled. This is the default setting. Leave this setting if no reason to disable NAT exists.
• Disab

le. NAT is disabled.
Router MA

C Address
The Ethernet MAC address that the modem router
 uses on the Internet port. Some ISPs register the MAC address of the
network interface card in your computer when your account is first opened. They accept traffic only from the MAC address
of that computer.
This feature allows your 
modem router to use your computer’s MAC address (also called cloning).
Use the default MAC address.
Use Default Address
The modem router captures and uses the MAC address of the computer that you
are no

w using. You must use the one computer that is registered by the ISP.
Use Computer MAC Address
Enter the MAC address that you want to use. By default, the field displays the MAC
address of the Internet port.
Use This MAC Address
13. Click the Apply button.
Y

our settings are saved.
14. Click the 
Test button to test your Internet connection.
If the NETGEAR website does not display within one minute, see Troubleshoot the Internet Connection on page
279. Manage the Internet Settings Manually
59
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000 
						

							Manually Set Up a VDSL Internet Connection
You can view or change the modem router’s VDSL Internet connection settings manually. The following sections
descr
ibe the options that are available to you to manually set up the VDSL Internet connection:
• Specify a VDSL Connection Without a Login Requirement on page 
60
• Specify a VDSL Connection With a Login Requirement and PPPoE Service on page 
65 Some ISPs require that you register on their website before you can obtain Internet service.
Follow the directions that your ISP gave you.
Note
Specify a VDSL Connection Without a Login Requirement
If you want to manually configure the VDSL connection settings, use the information that your ISP gave you to
connect to your Internet service. If you cannot find this information, contact your ISP. Entering incorrect information
might prevent the 
modem router from connecting to the Internet.
The modem router provides a virtual Internet interface and a virtual IPTV interface. In most situations, you only need
to configure the Internet interface. If you use one or more IPTV devices, you might also need to configure the IPTV
interface. Follow the directions that your ISP gave you. If you must configure the IPTV interface, first use the following procedure to configure the
Internet interface. Then, repeat the procedure to configure the IPTV interface.
Note
To view or specify the settings for a VDSL Internet connection that does not require a login: 1.
Launch a web browser from a computer or WiFi device that is connected to the network.
2. Enter 
http://www.routerlogin.net.
A login window opens.
3. Enter the 
modem router user name and password.
The user name is 
admin. The default password is password. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select Internet.
The Inter

net Setup page displays.
5. From the 
Select Country menu, select the country in which you use the modem router.
The 
Select Country menu is not available in all countries and might be masked out.
6. F
rom the Select Internet Service Provider
 menu, select the Internet service provider (ISP) that you are using. Manage the Internet Settings Manually
60
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000