NEC Xen Alpha Features And Specifications Manual

Features & Specifications, Programmable Pause for Speed DialP-6, Page 185A6-506000-642-02
Xen AlphaRelease 1.0
P-6Programmable Pause for Speed 
Dial
FEATURE
DESCRIPTION
Users can insert a pause when programming speed dial numbers using this feature. The
pause allows a short delay before accessing an external line.
S
TATION
APPLICATION
This feature is available for all Multiline telephones.
O
PERATING
PROCEDURES
 
While entering a speed dial number, press 
T (DTB-type telephones) or Q (DTU-type...

This page is intentionally blank.
Page 186, P-6Features & SpecificationsA6-506000-642-02 

Features & Specifications, Programming from Multiline TelephoneP-7, Page 187A6-506000-642-02
Xen AlphaRelease 1.0
P-7Programming from Multiline 
Telephone
FEATURE
DESCRIPTION
The system can be programmed using a multiline telephone. It is necessary to use a
telephone with an LCD to view the programmable options. Only ports 1 and 2 (normally
assigned to extensions 10 and 11) are used for telephone programming.
S
TATION
APPLICATION
This feature is applicable for all display Multiline telephones.
O...

This page is intentionally blank.
Page 188, P-7Features & SpecificationsA6-506000-642-02 

Features & Specifications, Resident System ProgramR-1, Page 189A6-506000-642-02
Xen AlphaRelease 1.0
R-1Resident System Program
FEATURE
DESCRIPTION
When power is supplied to the system, the system scans the hardware configuration and
assigns default values. This allows for plug-and-play operation of the system. Once
operational, the system can be customized for individual customers. 
O
PERATING
PROCEDURES
 
R
ELATTED
PROGRAMMING
All programming functions associated with this feature are listed in the...

This page is intentionally blank.
Page 190, R-1Features & SpecificationsA6-506000-642-02 

Features & Specifications, Ringing Line PreferenceR-2, Page 191A6-506000-642-02
Xen AlphaRelease 1.0
R-2Ringing Line Preference
FEATURE
DESCRIPTION
When using ringing line preference, the user can answer any ringing line on their multiline
telephones by lifting the handset or pressing 
N (it is not necessary to press the line
key first). 
S
TATION
APPLICATION
This feature is available for all Multiline telephones and single line telephones.
O
PERATING
PROCEDURES
1. Lift the handset and talk with the...

This page is intentionally blank.
Page 192, R-2Features & SpecificationsA6-506000-642-02 

Features & Specifications, Room Monitor TelephoneR-3, Page 193A6-506000-642-02
Xen AlphaRelease 1.0
R-3Room Monitor Telephone
FEATURE
DESCRIPTION
A telephone can be used to monitor a room (e.g., this could be used to monitor a baby’s
room or a children’s play area).
S
TATION
APPLICATION
This feature is available for all Multiline telephones.
O
PERATING
PROCEDURES
 
1. Press  
O.
2. Dial  
E F.
3. Press  
O.
Note:This is the telephone that is located in the room to be monitored. You must
perform this...

Page 194, R-3Room Monitor Telephone, Features & SpecificationsA6-506000-642-02
!Only one monitored telephone (the telephone located in the area to be monitored) can
be designated at a time, however any number of multiline telephones can be set as
monitoring (listening) telephones.
!While a telephone is being monitored (the telephone located in the area to be
monitored), the microphone LED flashes red.
!When a telephone is enabled as the monitoring (listening) telephone, the speaker LED
flashes red.