NEC Xen Alpha Features And Specifications Manual

Features & Specifications, Night ModeN-2, Page 165A6-506000-642-02
Xen AlphaRelease 1.0
N-2Night Mode
FEATURE
DESCRIPTION
All telephones in the system can be placed into or out of night mode. This provides changes
in the ringing assignment for central office and PBX lines and direct inward termination (DIT)
assignments. This mode is set on a system-wide basis.
S
TATION
APPLICATION
This feature is available for all Multiline telephones.
!Refer to Automatic Day/Night Mode Switching, Page 15 for...

Page 166, N-2 Features & Specifications, Night ModeA6-506000-642-02
RELATED
PROGRAMMING
All programming functions associated with this feature are listed in the following table. Some
functions must be programmed before the feature is operational and other functions are
optional. The optional functions can affect how the feature operates. 
S
ERVICE
CONDITIONS
!Ringing is not generated for incoming calls from another tenant group regardless of
the settings.
!Multiline telephones without ringing remain...

Features & Specifications, Night ModeN-2, Page 167A6-506000-642-02
!Day/Night mode switching affects the following functions:
• Incoming Call Identification (assigned using Functions “301 → 306 – Day Ringing for Trunk
Lines 1 → 6 and 311 → 316 – Night Ringing for Trunk Lines 1 → 6”)
• External Ring Control (assigned using Functions “124 – External Ringing for Day Mode, 125
– External Ringing for Night Mode, 225 - External Ringing for Day Mode (Station Based)
and 226 - External Ringing for Night Mode...

This page is intentionally blank.
Page 168, N-2Features & SpecificationsA6-506000-642-02 

Features & Specifications, Off-Hook RingingO-1, Page 169A6-506000-642-02
Xen AlphaRelease 1.0
O-1Off-Hook Ringing
FEATURE
DESCRIPTION
If a user is currently on a call and receives another external call, off-hook ringing is provided
to the telephone’s external speaker. Off-hook Ringing is at a lower volume than normal on-
hook ringing.
S
TATION
APPLICATION
This feature is available for all Multiline telephones.
O
PERATION
PROCEDURE
 
R
ELATED
PROGRAMMING
All programming functions associated with this...

This page is intentionally blank.
Page 170, O-1Features & SpecificationsA6-506000-642-02 

Features & Specifications, One-Touch/Feature Access Keys – User ProgrammableO-2, Page 171A6-506000-642-02
Xen AlphaRelease 1.0
O-2One-Touch/Feature Access 
Keys – User Programmable
FEATURE
DESCRIPTION
Multiline telephone users can press a single key that has been programmed for functions
such as speed dialling, extension numbers, access codes, etc. By using the one-touch key
the user does not need to go off-hook, they simply press the programmed key and the
system seizes a line and dials the number.
S...

Page 172, O-2 One-Touch/Feature Access Keys – User Programmable ,Features & SpecificationsA6-506000-642-02
5. Enter the appropriate telephone number, speed dial memory location number,
extension number, special dial number, or feature access code.
6. Press 
U and enter the associated “name” (alphabetic characters). (Refer to
Character Registration, Page 65 for instructions about entering alphanumeric
characters.)
7. Press  
O.
 
1. Press 
V  (CO/PBX line key to seize an external line).
2. Press 
V...

Features & Specifications, One-Touch/Feature Access Keys – User ProgrammableO-2, Page 173A6-506000-642-02
RELATED
PROGRAMMING
All programming functions associated with this feature are listed in the following table.
Some functions must be programmed before the feature is operational and other functions
are optional. The optional functions can affect how the feature operates. 
S
ERVICE
CONDITIONS
!Any unused line keys can be assigned as one-touch/feature access keys.
!When deleting one-touch/feature...

This page is intentionally blank.
Page 174, O-2Features & SpecificationsA6-506000-642-02