NEC Xen Alpha Features And Specifications Manual

Features & Specifications, Telephone Volume ControlT-1, Page 225A6-506000-642-02
Xen AlphaRelease 1.0
T-1Telephone Volume Control
FEATURE
DESCRIPTION
This feature allows Multiline Telephone users to control the handset and the speaker/ringing
volume by pressing the up and down volume buttons on the telephone. It also allows the
user to change the contrast on the LCD of the DTU-type Multiline telephones.
S
TATION
APPLICATION
This feature is available for all Multiline telephones.
O
PERATING
PROCEDURE
 
1....

Page 226, T-1Telephone Volume Control, Features & SpecificationsA6-506000-642-02
1. Press  N or lift the handset.
2. Press 
W (
= louder or = softer) to increase or decrease the volume (Mfor DTU-
type telephones,
 ∧ = louder or ∨ = softer). 
1. Press  
N.
2. Press 
W (
= louder or = softer) to increase or decrease the volume (Mfor DTU-
type telephones,
 ∧ = louder or ∨ = softer).
3. Go on-hook.
- OR -
While using the speakerphone, press W (+= louder or ,= softer) to increase or
decrease the volume (...

Features & Specifications, Tenant ServiceT-2, Page 227A6-506000-642-02
Xen AlphaRelease 1.0
T-2Tenant Service
FEATURE
DESCRIPTION
This feature allows the outside lines to be subdivided in into two tenant groups or call pickup
groups. This allows each tenant to have access to their own assigned outside line. Users
cannot pick up calls coming into another tenant group.
O
PERATING
PROCEDURES
 
R
ELATED
PROGRAMMING
All programming functions associated with this feature are listed in the following table....

This page is intentionally blank.
Page 228, T-2Features & SpecificationsA6-506000-642-02 

Features & Specifications, Timed AlarmT-3, Page 229A6-506000-642-02
Xen AlphaRelease 1.0
T-3Timed Alarm
FEATURE
DESCRIPTION
A timed alarm can be set to any Multiline telephone as a reminder of a scheduled time. The
user can program the system to automatically send a reminder alarm to their telephone. Two
timed alarms are available system-wide.
S
TATION
APPLICATION
This feature is available for all Multiline telephones.
O
PERATING
PROCEDURES
 
1. Press  
O.
2. Dial  
E B (Alarm 1) or E E (Alarm 2).
3....

Page 230, T-3Timed Alarm, Features & SpecificationsA6-506000-642-02
SERVICE
CONDITIONS
!In the following cases, no alarm is sounded:
• A handsfree call is in progress or room monitoring is in progress.
• An internal voice announced call or tone signal call is being received.
• An incoming doorphone ringing call.
!Alarm 1 automatically resets (releases) when it sounds.
!Alarm 2 does not reset, it sounds each day at an preassigned time.
!If both alarms are set to the same time, only alarm 1 sounds. Alarm 2...

Features & Specifications, Tone OverrideT-4, Page 231A6-506000-642-02
Xen AlphaRelease 1.0
T-4To n e  O v e r r i d e
FEATURE
DESCRIPTION
Tone Override is used by one user to signal another user, who is engaged on a call, that they
have an incoming call. The called party can answer the incoming call by putting the existing
call on hold.
This feature also allows the user to switch between a tone override call and an existing call.
When the user answers the tone override call, the existing call is put on...

Page 232, T-4Tone Override, Features & SpecificationsA6-506000-642-02
!Tone override is only enabled when the called telephone is busy.
!The user can answer the tone override by pressing 
M (during an internal/external call
or while engaged in an add-on conference).
!A Single Line telephone has 30 seconds to send a tone override before it is disabled.
!If the user is speaking on the speakerphone and a tone override is received, the speech
path is temporarily disrupted and the party sending the tone...

Features & Specifications, Trunk Outgoing RestrictionT-5, Page 233A6-506000-642-02
Xen AlphaRelease 1.0
T-5Trunk Outgoing Restriction
FEATURE
DESCRIPTION
When telephones are assigned this feature, users are restricted from making some (or all)
external calls (such as long distance calls). Users can continue to answer calls however or
may be able to make internal calls only. What is restricted is determined by individual needs
and is programmed in system programming.
S
TATION
APPLICATION
This feature is...

This page is intentionally blank.
Page 234, T-5Features & SpecificationsA6-506000-642-02