NEC Xen Alpha Features And Specifications Manual

Features & Specifications, Trunk QueuingT-6, Page 235A6-506000-642-02
Xen AlphaRelease 1.0
T-6Trunk Queuing
FEATURE
DESCRIPTION
When all outside lines are busy, telephone users can queue onto the busy line. When the
line becomes available the system rings the telephone user to notify them that the a line is
available. The user can cancel the queue at any time.
S
TATION
APPLICATION
This feature is available for all Multiline telephones and Single Line telephones.
O
PERATING
PROCEDURES
 
1. Press the...

Page 236, T-6Trunk Queuing, Features & SpecificationsA6-506000-642-02
SERVICE
CONDITIONS
!Trunk queuing is not allowed if the telephone is a member of a different tenant group.
!Trunk queuing is enabled for the following conditions:
• When F C and the trunk number are dialed to seize a specific external line.
• When dial access code 
J is dialed.
• When the telephone is set for external line preference.
!If the telephone is not set to seize an external line, trunk queuing is disabled for that
telephone...

Features & Specifications, Two-Color LEDs (Lamp)T-7, Page 237A6-506000-642-02
Xen AlphaRelease 1.0
T-7Two-Color LEDs (Lamp)
FEATURE
DESCRIPTION
The system provides two-color (red and green) LEDs to provide various status indications of
the telephone. Hold and call waiting are a couple of example of status indications.
S
TATION
APPLICATION
This feature is available for all Multiline telephones.
O
PERATING
PROCEDURES
 
S
ERVICE
CONDITIONS
!The line keys on all Multiline telephones can light both red and...

This page is intentionally blank.
Page 238, T-7Features & SpecificationsA6-506000-642-02 

Features & Specifications, User ProgrammingU-1, Page 239A6-506000-642-02
Xen AlphaRelease 1.0
U-1User Programming
FEATURE
DESCRIPTION
Users are allowed to program the following features using their Multiline telephones and
Single Line telephones. 

Ancillary Device Connection, Page 5
Attendant Positions, Page 11
Call Forward – All Calls, Page 41
Call Forward – Busy/No Answer, Page 43
Clock/Calendar Display, Page 69
Character Registration, Page 65
Distinctive Ringing, Page 87
Extension Name Assignment,...

This page is intentionally blank.
Page 240, U-1Features & SpecificationsA6-506000-642-02 

Features & Specifications Manual – Appendix A Page - 241
A6-506000-642-02
Xen AlphaRelease 1.0
Appendix - A
FEATURE ACCESS
CODES &
S
PECIAL
NUMBERS LIST
This section provides a list of the feature access code and the special numbers that are used
when programming and operating the system. Feature Access Codes
 are codes that are entered
to access certain features of the system. Before using feature access codes, the user must
press 
O before and after entering the code. Special Internal Dials Numbers are...

 Page - 242Features & Specifications Manual – Appendix A
A6-506000-642-02
692Incoming Ring Mode (Common Mode)
7Privacy Release (Outside Line Calls)
75Low Battery LCD Indication Reset
!
This feature is only available for telephones assigned to ports 1 and 2.
10Headset Off-Hook/On-Hook Button
50Timed Alarm Verify (Alarm 1)
51Timed Alarm Cancel (Alarm 1)
52Timed Alarm Set/Cancel (Alarm 1)
53Timed Alarm Verify (Alarm 2)
54Timed Alarm Cancel (Alarm 2)
55Timed Alarm Set/Cancel (Alarm 2)
56Room Monitored...

Features & Specifications Manual – Appendix A Page  - 243A6-506000-642-02
 
Table A-2:  Special Internal Dial Numbers List
Access 
CodeDescription
0Auto Answer Assignment (Trunk Pickup)
10
 → 
 →  →   → 59Internal Extension Number Range
60Call Pickup from a different Tenant Group
61Call Pickup Internal/External from the same Tenant Group
63XSpecified CO/PBX Line Seizure
!
X = Outside Lines 1$6
65Do Not Disturb Set/Cancel
66Call Forward – All Calls Cancel
66XXCall Forward – All Calls Set/Cancel
!
XX =...

This page is intentionally blank.
 Page - 244Features & Specifications Manual – Appendix A
A6-506000-642-02