NEC Visualink 128/384 User Guide

NDA-24230 Issue 2.0Page 6-11
VisuaLink 128/384 User Guide Chapter 6
6.2.2  Place Speed Dial Calls
To dial a call from the dialing directory.
¬
Press the CALL
 button.
Á
Move the cursor to the site you want to call using CAMERA CONTROL
 
button.  Press the ENTER
 button.
Place Manual Dial Call
Place Redial Call
001.
002.
003.
004.
005.
Press ENTER after choosings
CALL
Place Manual Dial Call
Place Redial Call
001. Irving
002.
003.
004.
005.
Press ENTER after choosing
s
CAMERA
CONTROL
ENTER 

Page 6-12NDA-24230 Issue 2.0
Chapter 6 VisuaLink 128/384 User Guide
Â
The following series of screens will appear on the monitor as the VisuaLink is 
placing the call.
Once the line has been connected, the screen will automatically display the remote 
site.
After the lines connect a picture from the far-site appears.
Calling Remote Site.  Please wait…
Phone Number 1
  
[ 9725185000  ]
Phone Number  2
  [ 9725185001                        ]
REC
s
ENTER
CALL
Receiving Video 
       from Remote Site...

NDA-24230 Issue 2.0Page 6-13
VisuaLink 128/384 User Guide Chapter 6
6.2.3  Redialing a Call
Sometimes when you place a video call, the call may not go through the first time.  
If this happens, you may want to redial the call.  Just as with the redial feature on 
your telephone, the redial feature on your VisuaLink lets you automatically call 
the last 30 numbers that you have called or have received.
¬
Press the CALL
 button.
The Dial Directory screen appears.
Á
Using the CAMERA CONTROL 
button, move...

Page 6-14NDA-24230 Issue 2.0
Chapter 6 VisuaLink 128/384 User Guide
Â
Select the number that you would like to redial from the menu.  Use the 
CAMERA CONTROL
 button to scroll up or down through the 30 numbers.  
Press the ENTER
 button to make the call.
Note 1:
The redial bin stores the last 30 numbers dialed or received.  The message 
to the right of the number indicates whether the call was incoming or 
called.
Note 2:
All redial numbers are stored as phone numbers.
Note 3:
The redial number are...

NDA-24230 Issue 2.0Page 6-15
VisuaLink 128/384 User Guide Chapter 6
Ã
The following series of screens will appear on the monitor as the VisuaLink is 
placing the call.
Once the line has been connected, the screen will automatically display the remote 
site.
After the lines connect a picture from the far-site appears.
Calling Remote Site.  Please wait…
Phone Number 1
[7190409   ]
Phone Number 2
[7190410  ]
REC
ENTER
CALL
Receiving Video 
      from Remote Site
Connected Line Speed:  128kb/s
Speed is 
in...

Page 6-16NDA-24230 Issue 2.0
Chapter 6 VisuaLink 128/384 User Guide
6.3 End a Call
Press the HANGUP
 button on the remote controller to display the menu for 
disconnecting the remote end.
¬
Press the ENTER
 button to end the video call.  Press the CANCEL
 button to 
continue the video call.
Note 1:
If the line cannot be disconnected from the remote controller, turn off the 
power switch.  This will force the VisuaLink to hang up the video call.
Note 2:
If the far-end hangs up first, you will see the...

NDA-24230 Issue 2.0Page 6-17
VisuaLink 128/384 User Guide Chapter 6
6.4 Answer a Call
The VisuaLink is able to be set to automatic answer mode or manual answer.  If 
the VisuaLink set to an automatic answer all incoming calls will be answered by 
the VisuaLink without user intervention.When you receive a video call and your 
system is set for manual answer, your system rings just like a telephone, and you 
see a message like this on your screen:  
INCOMING CALL, PRESS ENTER TO ANSWER.
¬
To answer the...

Page 6-18NDA-24230 Issue 2.0
Chapter 6 VisuaLink 128/384 User Guide
Â
Press CANCEL
 button if rejecting an incoming call.Receiving Video from Remote Site
Connected Line Speed:  128kb/s
 
Speed is 
in yellow
Rejected incoming call........
Remote Address: Irving HQ
9722345678
 
CANCEL 

NDA-24230 Issue 2.0Page 7-1
VisuaLink 128/384 User Guide Chapter 7
Chapter 7  Conference Mode
This chapter gives an in-depth description of the on-screen menus.
7.1 How to Display the 
Conference Mode 
On-Screen IconsThis menu will display line speed, audio mode, video format and data settings for 
the local site and conference mode.
¬
Press MENU
 button to display the on-screen icons.
s
Setting the PIP parameter.MENU
Icon Description
Menu screen for setting PIP position to 
be displayed on the screen....

Page 7-2NDA-24230 Issue 2.0
Chapter 7 VisuaLink 128/384 User Guide
Á
Move the cursor s
 with CAMERA CONTROL
 button to the conference 
control icon and press ENTER
 button.  Conference Control Menu is 
displayed.
Local screen setting with no connection.
s
Display conference information.
ENTER
CAMERA
CONTROL
Status :  No Connection

Speed :  128Kb/s
Video Format :  FCIF
Audio mode :  SB-ADPCM
MLP speed :  4.0Kb/s
LSD speed :  1.2Kb/s
Indicates what type of connection, possible 
messages are:...