NEC Visualink 128/384 User Guide

NDA-24230 Issue 2.0Page 6-1
VisuaLink 128/384 User Guide Chapter 6
Chapter 6  About Calling
In this chapter you will learn to make and receive calls.  The Dialing Directory is 
a phone book that you create, listing the names and phone numbers of the sites that 
you can call.  Once you have entered these names and numbers into the Dialing 
Directory, you can call a site by either Directory dialing or speed dialing. The final 
section is how to receive a call on your VisuaLink.
6.1 Place a Manual 
CallYou...

Page 6-2NDA-24230 Issue 2.0
Chapter 6 VisuaLink 128/384 User Guide
Checking Operation  
Verify that local and remote sites are able to be seen and heard at the remote ends.  
Verify that a control from the remote controller is normal by referring to 
Chapter 8 Operation Method
.
If unable to connect to the remote site it maybe because the remote site is busy, 
wait and then repeat the above operation.  If the operation persist, proceed to 
Chapter 9 Troubleshooting
.
Â
Enter the first telephone number...

NDA-24230 Issue 2.0Page 6-3
VisuaLink 128/384 User Guide Chapter 6
Ã
If your call needs two (2) telephone numbers, enter the second number using 
the NUMBER
 buttons.  Press the ENTER
 button when finished.  If your call 
needs only one (1) telephone number, skip this step.
Note:
Two (2) call numbers are only needed when placing a 112/128 kbps call.  
All other speeds only require one (1) telephone number.
Ä
Press the CAMERA CONTROL
 button and the SPEED
 is chosen.  Using 
the CAMERA CONTROL
 button,...

Page 6-4NDA-24230 Issue 2.0
Chapter 6 VisuaLink 128/384 User Guide
Å
Press the ENTER
 button or CALL
 button to start dialing the remote site.
Once the line has been connected, the screen will automatically display the remote 
site.
Place Manual Dial Call
Phone Number 1
  
[ 9725185000   ]
Phone Number  2
  [ 9725185001                        ]
Speed : 
Press ENTER or CALL after entering
Press CANCEL to go to Call Screen
SPEED PHONE NUMBERS NEED 
TO BE ENTERED
TEL, 56, 64 1
112, 1282 (VL128)
1 or 2...

NDA-24230 Issue 2.0Page 6-5
VisuaLink 128/384 User Guide Chapter 6
After the lines connect a picture from the far-site appears.Receiving Video 
from Remote Site
Connected Line Speed: 128kb/s
REC 

Page 6-6NDA-24230 Issue 2.0
Chapter 6 VisuaLink 128/384 User Guide
6.2 Set Speed Dial 
NumberThe Dialing Directory is a phone book that you create, listing the names and 
phone numbers of the remote sites.  It makes dialing calls faster and easier.  When 
you add a new directory entry, you enter the site name and the phone number.  
When you add an entry, the speed dial directory assigns a speed dial number for 
that site.  The next time you want to call that site, you can simply type in the speed...

NDA-24230 Issue 2.0Page 6-7
VisuaLink 128/384 User Guide Chapter 6
Speed Dial Menu is displayed.    shows the selection of a number.
Note:
 If a name is displayed beside a number, it is already registered.
Â
Enter the SITE NAME
 by the following steps:
a. Highlight the letter, number, or symbol that you want using the 
CAMERA CONTROL 
button.
b. Press the ENTER
 button to accept the letter, number, or symbol.  The 
letter, number, or symbol appears next to the SPEED DIAL NUMBER
 at 
the top of the...

Page 6-8NDA-24230 Issue 2.0
Chapter 6 VisuaLink 128/384 User Guide
Ã
Speed Dial setting screen is displayed.
Ä
Type the first telephone number using the NUMBER
 buttons.  If incorrectly 
entered, delete a number with the CANCEL
 button.
Å
Using the CAMERA CONTROL
 button, select PHONE NUMBER 2
.  
Type the second telephone number.
Note:
If placing a video call at rates above 128, this step maybe deleted.
001.  Irving
Phone Number 1
  [                              ]
Phone Number 2
  [...

NDA-24230 Issue 2.0Page 6-9
VisuaLink 128/384 User Guide Chapter 6
Æ
Using the CAMERA CONTROL
 button, highlight SPEED
.  Using the left 
and right sides of the CAMERA CONTROL
 button, set the VIDEO 
SPEED
.  The default is 128.
001.  Irving
Phone Number 1
  [9725185000            ]
Phone Number 2
  [9725185001            ]
Speed      : <   128kb/s>
Press ENTER after entering
s
ENTER
NUMBER
CANCEL
 SPEED DIAL CHOICES
128 384
TEL
56
64
112
128TEL
56
64
112
128
168
192
224
256
280
320
336
384
Two telephone...

Page 6-10NDA-24230 Issue 2.0
Chapter 6 VisuaLink 128/384 User Guide
Ç
Press the ENTER
 button to return to the SPEED DIAL
 screen.
È
Repeat ¬
 to Ç
 to register additional SPEED DIAL
 numbers.
Speed dial register
001.  Irving
    002.
    003.
    004.
    005.
Press ENTER after choosing a number.
sENTER